[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Problem with Broadcom Corporation NetXtreme II BCM5708 bnx2



[Re-sending; used wrong source address.]

rem@xxxxxxx wrote:
I have a Dell PowerEdge 1950 with two NICs Broadcom NetXtreme II BCM5708 1000Base-T. I installed CentOS 5.1 and Xen 3.0.3 (RPM). One of my virtual machines has Windows 2003 Server. In this virtual machine my NICs appears like "Realtek RTL8139 Family PCI Fast Ethernet NIC". The problem is that when I ping to other machines sometimes the reply time value is very high:

C:>  ping 10.1.1.1
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time=-29815ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time=-298341ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127
Reply from 10.1.1.1: bytes=32 time=29382ms TTL=127
Reply from 10.1.1.1: bytes=32 time<1ms TTL=127

It important to indicate that the "real" time is good ( approximately between 1 and 2 seconds ). The problem is some applications used this value to monitor some servers and send alarms when time value is high. How you can see some time the reply value is negative.

The problem is only with virtual Windows machine.

What can I do? Some idea?

Sounds like you have a clock problem to me.

Have you tried disabling acpi in the VM definition?

There's also something called timer_mode, but good luck finding any documentation about it (like a lot of other Xen stuff).

--
Jefferson Ogata : Internetworker, Antibozo

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.