Re: [Xen-users] Bridge Networking stops working at random times

["Chris Holland" <rangerco1@xxxxxxxxx>]

Hello,

I am getting a similar problem that I've discussed in previous posts (with no solution that works so far).
The only difference is that when my network stops working the VM tries to reboot and fails with some sort of error related to a duplicate machine ID.

This seems to manifest itself when there is a high amount of simultaneous connections and/or high throughput.
I am wondering if your problem may not be so random and might be occurring under the same conditions?

Chris

On Thu, Aug 28, 2008 at 8:52 PM, Yves-Gaël Chény <yves@xxxxxxxxxxxxxx> wrote:

Hi Nathan
Have you got only one bridge into your xen or several ?

regards
yves

nathan@xxxxxxxxxxxx a écrit :

On Mon, 25 Aug 2008, Quintin Russ wrote:

Hi Nathan,

We are using similar hardware (Supermicro) with Debian, and are seeing similar results - the only difference is ours seem to appear after 100 days.

It has been hard for us to track down, but from memory our testing showed that it was related to the vif line in the config.... I would be interested to know if  by commenting this out, it stops happening?

All of my xen servers have the vif-script lines commented out in xend-config.spx. I have some servers stay up for as long as 100 days, but avg is a lot lower then that.

<>

Nathan Stratton                                CTO, BlinkMind, Inc.
nathan at robotics.net                         nathan at blinkmind.com
http://www.robotics.net                        http://www.blinkmind.com

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users