[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Xen 3.3 domU Networking
Hi All, I compiled xen3.3 on a rhel 5 machine and the dom0 booted ok without problems but when i start a rhel5 dom0 i don't get networking. During the domU boot process the message 'Networking not configured - exiting' appears. Did i miss something in the configuration file or loading a module? == config file == name = "vm1-gen-1" ip = "xx.xx.xx.xx" hostname = "gen-1" memory = "256" disk = ['phy:/dev/vg1/xen-root-gen1,xvda1,w','phy:/dev/vg1/xen-swap-gen1,xvda2,w'] root = "/dev/xvda1 ro" vif = ['mac=00:16:3e:aa:aa:aa,ip=xx.xx.xx.xx'] cpus = '0' vcpus = '1' gateway = "xx.xx.xx.xx" netmask = "255.255.0.0" on_reboot = 'restart' on_crash = 'restart' on_poweroff = 'restart' bootloader = '/usr/bin/pygrub' == dom0 brctl show == bridge name bridge id STP enabled interfaces eth0 8000.001e4f3dbe83 no vif3.0 peth0 === boot - domU === Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/51713 XENBUS: Device with no driver: device/vbd/51714 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/console/0 Freeing unused kernel memory: 168k freed Write protecting the kernel read-only data: 360k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading ohci-hcd.ko module Loading ehci-hcd.ko module Loading jbd.ko module Loading ext3.ko module Loading dm-mod.ko module device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@xxxxxxxxxx Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading xenblk.ko module Registering block device major 202 Loading xennet.ko module netfront: Initialising virtual ethernet driver. netfront: device eth0 has copying receive path. Creating root device. Mounting root filesystem. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. audit(1223903723.862:2): selinux=0 auid=4294967295 ....... Setting hostname localhost: [ OK ] No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/xvda1 /dev/xvda1: clean, 51585/655360 files, 381138/1310720 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: mount: none already mounted or /sys busy mount: according to mtab, sysfs is already mounted on /sys [FAILED] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Applying Intel CPU microcode update: [FAILED] There is not any 3945 hardware, not starting ipw3945dStarting KnConfig: [NO DATA] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Networking not configured - exiting Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] [ OK ] Bluetooth services:[ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: [ OK ] Starting autofs: Loading autofs4: [ OK ] Starting automount: [ OK ] Regards, Ricardo _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |