RE: [Xen-users] GPL PV Intermitent Network Problems

["James Harper" <james.harper@xxxxxxxxxxxxxxxx>]

Interesting... you are using irq 5. Are you not running with apic=1 in
the config?

I suspect that the problems you are seeing are because you are using an
interrupt < 16, which behave a little differently than those > 16. On my
system (apic and acpi left at the default of enabled) the Xen PCI Device
gets IRQ 28 and all the sub-devices use the same IRQ (even though device
manager reports the IRQ as ISA).

James

> -----Original Message-----
> From: Nick Couchman [mailto:Nick.Couchman@xxxxxxxxx]
> Sent: Tuesday, 11 November 2008 11:00
> To: James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] GPL PV Intermitent Network Problems
> 
> Here you go.  I ran the command a few times - not sure if that matters
or
> not.
> 
> -Nick
> 
> >>> "James Harper" <james.harper@xxxxxxxxxxxxxxxx> 2008/11/10 16:13
>>>
> >
> > Version shows as 0.9.11.
> 
> Pity.
> 
> Okay, please fire up DebugView and in Dom0 type "xm sysrq <domain> C".
> That will cause some debug information to be dumped. Please put that
in
> an email to me. It should look something like:
> 
> XenPCI --> XenPci_SysrqHandler
> XenPCI     SysRq Value = C
> XenPCI     path = device/vfb/0
> XenPCI     backend_path = /local/domain/0/backend/vfb/82/0
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/vbd/768
> XenPCI     backend_path = /local/domain/0/backend/vbd/82/768
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/vbd/5632
> XenPCI     backend_path = /local/domain/0/backend/vbd/82/5632
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/vif/0
> XenPCI     backend_path = /local/domain/0/backend/vif/82/0
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/vif/1
> XenPCI     backend_path = /local/domain/0/backend/vif/82/1
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/vif/2
> XenPCI     backend_path = /local/domain/0/backend/vif/82/2
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI     path = device/console/0
> XenPCI     backend_path = /local/domain/0/backend/console/82/0
> XenPCI     irq_number = 28
> XenPCI     irq_level = 9
> XenPCI     irq_vector = 1a3
> XenPCI <-- XenPci_SysrqHandler
> 
> Thanks
> 
> James
> 
> 
> ________________________________
> 
> This e-mail may contain confidential and privileged material for the
sole
> use of the intended recipient. If this email is not intended for you,
or
> you are not responsible for the delivery of this message to the
intended
> recipient, please note that this message may contain SEAKR Engineering
> (SEAKR) Privileged/Proprietary Information. In such a case, you are
> strictly prohibited from downloading, photocopying, distributing or
> otherwise using this message, its contents or attachments in any way.
If
> you have received this message in error, please notify us immediately
by
> replying to this e-mail and delete the message from your mailbox.
> Information contained in this message that does not relate to the
business
> of SEAKR is neither endorsed by nor attributable to SEAKR.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users