[Xen-users] Re: Backup

["Paras pradhan" <pradhanparas@xxxxxxxxx>]

On Thu, Nov 20, 2008 at 7:41 AM, Ferenc Wagner <wferi@xxxxxxx> wrote:

"Paras pradhan" <pradhanparas@xxxxxxxxx> writes:

> Here's what I did:
>
> To backup:
>
> 1) Saved the virtual machines' state using:
>
> xm save guest01 /guest01.save
>
> 2) lvcreate -s -L 2G -n guest01-snap /dev/vg/guest01-disk
>
> 3) Restored the VM
>
> xm restore /guest01.save
>
> 4) Used DD to create the image
>
> dd if=/dev/vg/guest01-snap of=/guest01.img
>
> 5) lvremove /dev/vg/guest01-snap
>
> To restore:
>
> 1) I turned off the VM (i don't like this)
>
> xm shutdown guest01
>
> 2) Then run:
>
> dd if=/guest01.img of=/dev/vg/guest01-disk
>
> 3) Turn back the VM on
>
> --
>
> My virtual machine is consuming 11GB of space. Now when i do DD while
> restoring it took a lot of time.
>
>
> ---
> 10737418240 bytes (11 GB) copied, 1189.42 seconds, 9.0 MB/s
>
> ---
>
>
> Is this normal?

Impossible to tell without knowing a lots of details about your
storage system.

> I don't know if the process that I have used is fine or not. Need
> views on this.

Looks OK, but be prepared that your filesystems will be unclean after
restore.  If instead of turning the VM on you did an xm restore again,
then your filesystems would be OK, but some operations could be carried
out again in the restored domain.
--
Cheers,
Feri.

xm restore looks to be fine when i restored.

Thanks

Paras.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users