[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] xen-3.3 missing xenbr0 new tmpbridge


I should be read my article still another 2. time...
xenbr0 was renamed to eth0, but why?

On [3] "Xen 3.2+ Networking" written: "eth0 and eth1 are the bridge names..."
Me too find it is confusing.

[3] http://wiki.xensource.com/xenwiki/XenNetworking

it contains network-samples, but no config-examples and
predivide and disadvantages.

on xend-config.sxp written:

# To bridge network traffic, like this:
# dom0: ----------------- bridge -> real eth0 -> the network
#                            |
# domU: fake eth0 -> vifN.0 -+
# use
# (network-script network-bridge)
# The bridge is named xenbr0, by default.  To rename the bridge, use
# (network-script 'network-bridge bridge=<name>')


It seen to be description and working to drift apart.


- Test7 overwrite bridge-name

# diff xend-config.sxp.org xend-config.sxp
< (network-script network-bridge)
> #(network-script network-bridge)
> (network-script 'network-bridge bridge=xenbr0')

## network-bridge stop .. start || reboot

# brctl show
bridge name     bridge id               STP enabled     interfaces
eth0            8000.0015c5be8f93       no              peth0

  -> not working

How must it are configured that xenbr0 showing as before version 3.2 ?

regards torsten

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.