[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] HVM phy: disks not working; file: disks no problem


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Mark Walkom" <markwalkom@xxxxxxxxx>
  • Date: Fri, 19 Dec 2008 15:46:53 +1100
  • Delivery-date: Thu, 18 Dec 2008 20:47:48 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:in-reply-to:mime-version :content-type:references; b=utfvlRR4Y8OoXR+/VSvqtHprSUPrNl5ECGtzQSmxenP0RCPoFxqVg8jF6fpGD7tX/f wLndKJwc/xYz4tk0lhzRzhOXEO/EgE0Zk+4bRPxxH6h/rD89mQ5wVAejiA1vU+NLwcrV 1fP+r0CZjRoW15C2S6fCTa31sFKLNVVOPBdbQ=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

In my experience I've always used full paths to the LV, so;
  disk =  [ 'phy:/dev/domU/w2k30.root,hda,w' ]

It's worked for me.

2008/12/19 John Morris <jman@xxxxxxxxxxx>
CentOS 5.2 dom0 w/fairly recent updates on x86_64, xen 3.2.0 RPM from xensource recompiled for x86_64, Win 2k3 domU (with GPL PV drivers).

With HVM, phy: disks on LVs won't work, although the same host has many PV CentOS hosts running no problem from LVs.  The file: disks work with no problems.  The disk configurations I've tried:

Neither works:
  disk =  [ 'phy:domU/w2k30.root,ioemu:hda,w' ]
  disk =  [ 'phy:domU/w2k30.root,hda,w' ]

  Selected logs:
  [2008-12-19 12:00:11 3365] INFO (XendDomainInfo:1504) createDevice: vbd : \
      {'uuid': 'dada2695-5fdd-85c9-3990-8d1978a35782', 'bootable': 1, 'driver': 'ioemu', \
      'dev': 'ioemu:hda', 'uname': 'phy:domU/w2k30.root', 'mode': 'w'}
  [2008-12-19 12:00:12 3365] INFO (XendDomainInfo:1273) Domain has shutdown: name=w2k30 id=63 reason=poweroff.

Works:
  disk  =  [ 'file:/d/distro.w2k3/w2k30.root,hda,w', ]
  disk  =  [ 'tap:aio:/d/distro.w2k3/w2k30.root,hda,w' ]

  Selected logs:
  [2008-12-19 12:05:15 3365] INFO (XendDomainInfo:1504) createDevice: tap : \
      {'bootable': 1, 'uname': 'tap:aio:/d/distro.w2k3/w2k30.root', 'mode': 'w', 'dev': '\
      hda', 'uuid': 'ee5b79fa-2286-dcab-9864-21af8fce8a8e'}

With the phy: disk, the host will begin to boot, but then immediately shut down.  The phy: disk image was created by dding the file from the installed file: image into the blank phy: LV.

If booted from the win2k3 install CD (cdrom specified as file:, disk as phy:), the install hangs forever at "Setup is starting Windows", presumably as it's trying to grok the hard drive configuration.

I managed to get the domain to pause during the Plex86/Bocks Bios, and see the disk detection as follows:
  ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (   0 MBytes)
  ata0  slave: Unknown device

  Booting from Hard Disk...

At this point the domain shuts down.

More information:

  [root@xen-3 distro.w2k3]# lvs /dev/domU/w2k30.root
    LV         VG   Attr   LSize Origin Snap%  Move Log Copy%  Convert
    w2k30.root domU -wi-a- 5.19G
  [root@xen-3 distro.w2k3]# fdisk -l /dev/domU/w2k30.root

  Disk /dev/domU/w2k30.root: 5570 MB, 5570035712 bytes
  255 heads, 63 sectors/track, 677 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes

                 Device Boot      Start         End      Blocks   Id  System
  /dev/domU/w2k30.root1   *           1         660     5301418+   7  HPFS/NTFS

Complete config file follows.  Let me know what else I can provide to debug this problem.  Thanks-

  John


#
# xen configfile for host w2k30.bt1.ablesky.com
# use 'xm create w2k30 mode=install' to boot from w2k3 install CD
#
name = "w2k30"
memory = 1024  # memory for normal operation
shadow_memory = 8
#
# disks
#disk =  [ 'phy:domU/w2k30.root,ioemu:hda,w', ]
#disk  =  [ 'file:/d/distro.w2k3/w2k30.root,hda,w', ]
disk  =  [ 'tap:aio:/d/distro.w2k3/w2k30.root,hda,w' ]
#
# network interfaces
vif = [ "mac=00:16:ee:a8:c8:26, type=ioemu, bridge=btbr, model=e100", ]
#
kernel = "/usr/lib64/xen/boot/hvmloader"
builder = "hvm"
device_model = "/usr/lib64/xen/bin/qemu-dm"
localtime=1
sdl = 0
vnc = 1
vnclisten = "0.0.0.0"
vncdisplay = 1
vncconsole = 1
vncunused = 0
vncpasswd = ""
nographic = 0
stdvga = 0
usbdevice='tablet'
serial = 'pty'
vcpus=1
pae=1
acpi=1
apic=1
#
# test if mode variable is defined
try:
  mode
except NameError:
  mode = 'normal'
#
if mode not in ('install','reinstall'):
      # this is for after install
      boot = 'c'
      on_reboot   = 'restart'
      on_crash    = 'restart'
else:
      # these are for install
      disk = [ 'file:/d/distro.w2k3/en_win_srv_2003_r2_datacenter_with_sp2_vl_cd1.iso,hdb:cdrom,r', \
               'file:/d/distro.w2k3/en_win_srv_2003_r2_datacenter_with_sp2_vl_cd2.iso,hdc:cdrom,r' ] + \
             disk
      boot        = 'd'
      on_reboot   = 'destroy'
      on_crash    = 'destroy'


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.