[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Re: Looking to install guest vm - slackware 12.1
So I gave up on the mkuml script, though it appeared to work. I went to jailtime.org, downloaded the image along with the cfg file. I'm using this for my xm config file --kernel = "/boot/vmlinuz-2.6.18-92.1.10.el5xen" ------ Should I be using something else here? -------- memory = 256 name = "slackware.12-1" dhcp = "dhcp" vif = [''] disk = ['file:/var/lib/xen/images/slackware.12-1.img,sda1,w'] root = "/dev/sda1 ro" And the error I am getting is -- No filesystem could mount root, tried: ext2 iso9660Kernel panic - not syncing: VFS: Unable to mount root fs on unknown- block(1,0) And my full screen output is -- xm create slackware.12-1.xen3.cfg -c Using config file "./slackware.12-1.xen3.cfg". Started domain slackware.12-1 Bootdata ok (command line is ip=:1.2.3.4::::eth0:dhcp)Linux version 2.6.18-92.1.10.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Aug 5 08:11:18 EDT 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000008800000 (usable) No mptable found. Built 1 zonelists. Total pages: 34816 Kernel command line: ip=:1.2.3.4::::eth0:dhcp Initializing CPU#0 PID hash table entries: 1024 (order: 10, 8192 bytes) Xen reported: 1808.198 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Software IO TLB disabledMemory: 122840k/139264k available (2417k kernel code, 8092k reserved, 1350k data, 176k init) Calibrating delay using timer specific routine.. 4521.71 BogoMIPS (lpj=9043429) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) (SMP-)alternatives turned off Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1F7A0 could not acquire Mutex [2] [20060707] No dock devices found.ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1F7A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: Fatal: No PCI config space access function found PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 4096 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1229724544.055:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 515E7DAC50827A95 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Bootdata ok (command line is ip=:1.2.3.4::::eth0:dhcp)Linux version 2.6.18-92.1.10.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Aug 5 08:11:18 EDT 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000008800000 (usable) No mptable found. Built 1 zonelists. Total pages: 34816 Kernel command line: ip=:1.2.3.4::::eth0:dhcp Initializing CPU#0 PID hash table entries: 1024 (order: 10, 8192 bytes) Xen reported: 1808.198 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Software IO TLB disabledMemory: 122840k/139264k available (2417k kernel code, 8092k reserved, 1350k data, 176k init) Calibrating delay using timer specific routine.. 4521.71 BogoMIPS (lpj=9043429) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) (SMP-)alternatives turned off Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1F7A0 could not acquire Mutex [2] [20060707] No dock devices found.ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 1F7A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: Fatal: No PCI config space access function found PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 4096 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1229724544.055:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 515E7DAC50827A95 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ processors (1 cpu cores) (version 2.20.00) powernow-k8: BIOS error - no PSB or ACPI _PSS objects XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vif/0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. attempt to access beyond end of device ram0: rw=0, want=18446744056529682440, limit=32768isofs_fill_super: bread failed, dev=ram0, iso_blknum=17, block=-2147483648 No filesystem could mount root, tried: ext2 iso9660Kernel panic - not syncing: VFS: Unable to mount root fs on unknown- block(1,0) I'm running xen 3.1 on a centos5.2 box. It was installed via yum. Any thoughts? Thanks, Charlie On Dec 19, 2008, at 12:09 AM, Charlie Reddington wrote: Hey everyone,I'm looking to install a copy of slackware for a vm, and I'm following the following page for instructions - http://wiki.xensource.com/xenwiki/SlackwareDomUI keep running into snags with the mkuml installer script. Is there any more 'updated' solution to installing this? Or am I doomed to modifying the mkuml.sh script until I can get it to install?I'm sure I'll get it sooner than later, but it's getting annoying to have to constantly keep tweaking this script.Thanks, Charlie _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |