Re: [Xen-users] Error: pci: 0000:02:06.0 must be co-assigned to the same guest with 0000:02:05.0

[Frank Mueller <frank.mueller@xxxxxxxx>]

Hi Velten,

you could try to put the isdn card in a different pci-slot.

You get around the "co-assigned" message with assigning the pci  
devices xen wants into one domU, however this might not be always  
possible ( eg. motherboard devices)
However, i am testing xen3.3.1 on opensuse11 at the moment and it looks
like the pv pci-passtrough is seriously broken.

pv pci-passtrough worked wonderful in opensuse10.3 which xen 3.1.  
Trying the same ( with same domU config file) in xen3.3.1 just gives  
you the "co-assigned" and even worse, if you assign all pci devices  
xen wants in the domu, the domU starts, but it looks like the  domU  
does not get the interrupt from the device.
I believe the VT-d passtrough code messed up the pv passtrough, hope  
this gets fixed soon.
Regards

Frank



> next step... :)
>
> i got pcihiding on, with modprobe an manual hiding, but now
>
> # xm create auto/fli4l
> Using config file "/etc/xen/auto/fli4l".
> Error: pci: 0000:02:06.0 must be co-assigned to the same guest with
> 0000:02:05.0
>
>
> 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 02:06.0 Network controller: Cologne Chip Designs GmbH ISDN network
> controller [HFC-PCI] (rev 02)
>
>
> i need the Ethernet controller in Fli4l-domain and the ISDN Controller
> in an asterisk domain....
>
>
> how can i fix this ?
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users