Re: [Xen-users] CentOS 5.3 bond0 and xen 3.3.0

[Mike Brady <mike.brady@xxxxxxxxxxxxxx>]

On Fri, 2009-05-29 at 12:09 -0800, jonr@xxxxxxxxxx wrote:
> I now have one problem left. :)
> 
> I cannot ping from the dom0 and I am not sure where to look for any problems.
> 
> I have configured my system as you have shown above, except I put in  
> my values.
> I have dropped my firewall
> turned off SELinux
> Logs show nothing out of the ordinary and am seeing no errors in them,  
> at least none that I notice.
> 
> 
> I tcpdump on the gateway and I see the arp (who has) coming in and an  
> arp reply coming back out but I only see "Destination Host Unreachable"
> 
> 
> I have the two ports on the switch bonded as 802.3ad same as my ports  
> on the dom0.
> 
> Any more help is appreciated,
> 
> Jon
> 
> 
Maybe the bond isn't actually functioning?  I had problems to begin with
figuring out what modes actually worked between Linux and my switch.

I suggest taking both the bridge and Xen out of the picture and making
sure that the bond is actually working with a normal kernel and no
bridge.  That is what I did to sort mine out. 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users