[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] LPT configuration for the DomU


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: sergey kostanbaev <sergey.kostanbaev@xxxxxxxxx>
  • Date: Wed, 12 Aug 2009 14:27:37 +0400
  • Delivery-date: Wed, 12 Aug 2009 03:28:21 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=OOsST/Z4VXbBpbV/nguA/Kf2KOB0PAXI2d0BOysrFYuWQzdS/BQumUyh8w8gfJt5en 3MeyWBl36ViCCqk+ZTO/KsaFcIv4qF6KgCeQNCgz4FvNCqLJzm958YhSHIJWg1G819HN u4chG/ulc14J6K5sj829gT6BsQnEJIvNTH8Ds=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello everybody!

Do you know how to pass physical LPT port to the DomU?

I found some information about ioports=[''] but it seems it works only if the port range is the same on the host and VM. My motheboard hasn't any LPT so I use PCI board. Using such board lead to different IO range.

05:01.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01)
    Subsystem: LSI Logic / Symbios Logic Device 0014
    Flags: medium devsel, IRQ 22
    I/O ports at ec00 [size=8]
    I/O ports at e880 [size=8]
    I/O ports at e800 [size=8]
    I/O ports at e480 [size=8]
    I/O ports at e400 [size=8]
    I/O ports at e080 [size=16]

Does anybody know how to tell Xen using e080 host io for the 03bc vm io
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.