Xen project Mailing List

RE: [Xen-users] cannot boot PV guest

To: Robbie Garrett <rgarrett@xxxxxxxxxxxxxx>

From: Fasiha Ashraf <feehapk@xxxxxxxxxxx>

Date: Fri, 28 Aug 2009 11:08:45 +0530 (IST)

Delivery-date: Thu, 27 Aug 2009 22:39:39 -0700

Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.in; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:Cc:In-Reply-To:MIME-Version:Content-Type; b=5Svy862bsbxOpQE83l4EockSQdlxySs9XrDXyKUY9zLI1sgJmasmWmZB0GE0xMZGdANtl0al9Zdu3kdNzQAl8QZYGLOgWTwgOz91kdh7nKdDWMWbQJUEA9rmumwmkeaXo+K0EXg0r7U8d/Si5eJIr9fSHo/HJ5oZIr/dDggYlT0=;

List-id: Xen user discussion <xen-users.lists.xensource.com>

name="FC11-G1S2"
memory=500
vif = [ '' ]
dhcp = "dhcp"
disk = ['phy:/dev/sda3,sda3,wâ]
kernel = "/etc/xen/vm/vmlinuz"
ramdisk = "/etc/xen/vm/initrd.img"
vcpus=1

I tried this but the problem is with line 5 the highlighted one. how to check that which disk should be specified in my case?

Fasiha Ashraf

--- On Thu, 27/8/09, Robbie Garrett <rgarrett@xxxxxxxxxxxxxx> wrote:

From: Robbie Garrett <rgarrett@xxxxxxxxxxxxxx>
Subject: RE: [Xen-users] cannot boot PV guest
To: "'Fasiha Ashraf'" <feehapk@xxxxxxxxxxx>, "'Fajar A. Nugraha'" <fajar@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Thursday, 27 August, 2009, 5:13 PM

Try this.

Make the line that reads

vif = [ 'bridge=eth0' ]

read as follows

vif = [ '' ]

From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Fasiha Ashraf
Sent: Thursday, August 27, 2009 7:11 AM
To: Fajar A. Nugraha
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] cannot boot PV guest

#nano F11.install

name="FC11-G1S2"

memory=500

vif = [ 'bridge=eth0' ]

dhcp = "dhcp"

disk = [âdisk = ['phy:/dev/sda1,xvda,wâ]

kernel = "/etc/xen/vm/vmlinuz"

ramdisk = "/etc/xen/vm/initrd.img"

vcpus=1

[root@HPCNL-SR-2 xen]# xm create F11.install

Using config file "./F11.install".

Error: Errors were found at line 5 while processing ./F11.install:

What should be given as disk value. Pleas explain.

Regards,
Fasiha Ashraf

--- On Thu, 27/8/09, Fajar A. Nugraha <fajar@xxxxxxxxx> wrote:

From: Fajar A. Nugraha <fajar@xxxxxxxxx>
Subject: Re: [Xen-users] cannot boot PV guest
To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Thursday, 27 August, 2009, 2:31 PM

On Thu, Aug 27, 2009 at 1:50 PM, Fasiha Ashraf<feehapk@xxxxxxxxxxx> wrote:
> kernel = "/etc/xen/vm/vmlinuz.1"

> [root@HPCNL-SR-2 xen]# xm create F11.install
> Using config file "./F11.install".
> Error: (2, 'Invalid kernel', 'elf_xen_note_check: ERROR: Will only load
> images built for the generic loader or Linux images')
>
> Where am I wrong? Please guide me!

Is this the correct kernel? the ".1" extension seems to indicate a
second download with wget. Perhaps it's corrupted. Make sure it's the
correct kernel.

Also checkout a recent thread on this list about installing F11 on
Centos with virt-install.

--
Fajar

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

start: 2008-06-21 end: 0000-00-00

See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz.

-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

Yahoo! Local

_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users