[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Serail output of Ubuntu 9.10 PV DomU hangs just before login promt


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
  • Date: Sat, 29 Aug 2009 06:59:37 -0700 (PDT)
  • Delivery-date: Sat, 29 Aug 2009 07:01:01 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=5527qnSxtquHxg8a4BzfC5xaKOIT7EvrE8Vvz9KbCrk2QsDxP8IbrjrSpCO26VrJH9p7HK1Z6taXQbjZ1dDi1jNbFnYu8aRMjUMgjfGo0NCQuHU9qgNZoill66oA2PRtQF6Jb31hx0AVT2F3lLxt/G0giDGJ3GAYtF0HIQtguSs=;
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Karmic Server (Alpha 4) HVM installed at Xen 3.4.1 Dom0 (F11) via virt-install
/etc/default/grub switched not to use UUID.   PV profile :-

[root@ServerXen boris]# cat karmic.cfg
memory = 2048
name = "Ubuntu910PV"
vcpus = 2
kernel="./vmlinuz-2.6.31-5-server"
ramdisk="./initrd.img-2.6.31-5-server"
vif = [ 'bridge=eth0' ]
disk = [ 'phy:/dev/sdc11,xvda,w']
root = "/dev/xvda2 ro"
extra="xencons=tty"


# xm create -c karmic.cfg

. . . . . . . . . . . . . . . . . . .

[    3.367533] udev: starting version 145
[    3.710084] Initialising Xen virtual ethernet driver.
[    4.191428] type=1505 audit(1251553011.638:2): operation="profile_load" pid=1044 name=/sbin/dhclient3
[    4.191891] type=1505 audit(1251553011.638:3): operation="profile_load" pid=1044 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.192131] type=1505 audit(1251553011.638:4): operation="profile_load" pid=1044 name=/usr/lib/connman/scripts/dhclient-script
[    5.432762] lp: driver loaded but no devices found
[root@ServerXen boris]# vi karmic.cfg
[root@ServerXen boris]# xm create -c karmic.cfg
Using config file "./karmic.cfg".
Started domain Ubuntu910PV (id=43)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-5-server (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1) ) #24-Ubuntu SMP Sat Aug 1 13:47:41 UTC 2009 (Ubuntu 2.6.31-5.24-server)
[    0.000000] Command line: root=/dev/xvda2 console=tty0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000080000000 (usable)
[    0.000000] DMI not present or invalid.
[    0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 00000000000a0000 (usable)
[    0.000000]  modified: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000080000000 (usable)
[    0.000000] init_memory_mapping: 0000000000000000-0000000080000000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000] RAMDISK: 019d7000 - 02e02000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000080000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000]   NODE_DATA [0000000000008000 - 000000000000cfff]
[    0.000000]   bootmap [000000000000d000 -  000000000001cfff] pages 10
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0080000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0003205000 - 0003222000]   XEN PAGETABLES ==> [0003205000 - 0003222000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #3 [0001000000 - 00019b6094]    TEXT DATA BSS ==> [0001000000 - 00019b6094]
[    0.000000]   #4 [00019d7000 - 0002e02000]          RAMDISK ==> [00019d7000 - 0002e02000]
[    0.000000]   #5 [0002e02000 - 0003205000]   XEN START INFO ==> [0002e02000 - 0003205000]
[    0.000000]   #6 [0000100000 - 00004e3000]          PGTABLE ==> [0000100000 - 00004e3000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00080000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocated 22 4k pages, static data 89952 bytes
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516021
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/xvda2 console=tty0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 2028856k/2097152k available (5257k kernel code, 404k absent, 67892k reserved, 2980k data, 652k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:4352 nr_irqs:288
[    0.000000] Detected 2833.010 MHz processor.
[    0.010000] Console: colour dummy device 80x25
[    0.010000] console [tty0] enabled
[    0.010000] console [hvc0] enabled
[    0.010000] allocated 20971520 bytes of page_cgroup
[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.010000] installing Xen timer for CPU 0
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.02 BogoMIPS (lpj=28330100)
[    0.010000] Security Framework initialized
[    0.010000] AppArmor: AppArmor initialized
[    0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010000] Mount-cache hash table entries: 256
[    0.010000] Initializing cgroup subsys ns
[    0.010000] Initializing cgroup subsys cpuacct
[    0.010000] Initializing cgroup subsys memory
[    0.010000] Initializing cgroup subsys freezer
[    0.010000] Initializing cgroup subsys net_cls
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 6144K
[    0.010000] CPU 0/0x1 -> Node 0
[    0.010000] CPU: Unsupported number of siblings 4
[    0.010000] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only.
[    0.010000] SMP alternatives: switching to UP code
[    0.010067] cpu 0 spinlock event irq 1
[    0.010276] installing Xen timer for CPU 1
[    0.010292] cpu 1 spinlock event irq 7
[    0.010318] SMP alternatives: switching to SMP code
[    0.000012] Initializing CPU#1
[    0.000054] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000056] CPU: L2 cache: 6144K
[    0.000059] CPU 1/0x1 -> Node 0
[    0.000062] CPU: Unsupported number of siblings 4
[    0.020097] Brought up 2 CPUs
[    0.020441] Booting paravirtualized kernel on Xen
[    0.020447] Xen version: 3.4.1 (preserve-AD)
[    0.020594] Grant table initialized
[    0.020599] regulator: core version 0.5
[    0.040645] Time: 165:165:165  Date: 165/165/65
[    0.040693] NET: Registered protocol family 16
[    0.040742] PCI: Fatal: No config space access function found
[    0.040742] bio: create slab <bio-0> at 0
[    0.040742] ACPI: Interpreter disabled.
[    0.040742] xen_balloon: Initialising balloon driver.
[    0.040742] SCSI subsystem initialized
[    0.040742] usbcore: registered new interface driver usbfs
[    0.040742] usbcore: registered new interface driver hub
[    0.040742] usbcore: registered new device driver usb
[    0.040742] PCI: System does not support PCI
[    0.040742] PCI: System does not support PCI
[    0.080017] Bluetooth: Core ver 2.15
[    0.080074] NET: Registered protocol family 31
[    0.080074] Bluetooth: HCI device and connection manager initialized
[    0.080074] Bluetooth: HCI socket layer initialized
[    0.080074] NET: Registered protocol family 8
[    0.080074] NET: Registered protocol family 20
[    0.080074] NetLabel: Initializing
[    0.080075] NetLabel:  domain hash size = 128
[    0.080078] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.080095] NetLabel:  unlabeled traffic allowed by default
[    0.081989] pnp: PnP ACPI: disabled
[    0.082482] AppArmor: AppArmor Filesystem Enabled
[    0.082508] NET: Registered protocol family 2
[    0.082681] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.083639] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.085120] TCP bind hash table entries: 65536 (order: 8, 1048576 by[    0.142241] registered taskstats version 1
[    0.142262] XENBUS: Device with no driver: device/vbd/51712
[    0.142267] XENBUS: Device with no driver: device/vif/0
[    0.142271] XENBUS: Device with no driver: device/console/0
[    0.142284]   Magic number: 1:252:3141
[    0.142300] /build/buildd/linux-2.6.31/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.142307] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.142312] EDD information not available.
[    0.142380] Freeing unused kernel memory: 652k freed
[    0.142588] Write protecting the kernel read-only data: 7504k
[    0.419665] blkfront: xvda: barriers enabled
[    0.420074]  xvda: xvda1 xvda2 xvda3
[    0.824930] PM: Starting manual resume from disk
[    0.830420] EXT4-fs (xvda2): INFO: recovery required on readonly filesystem
[    0.830434] EXT4-fs (xvda2): write access will be enabled during recovery
[    0.841030] EXT4-fs (xvda2): barriers enabled
[    0.912740] kjournald2 starting: pid 846, dev xvda2:8, commit interval 5 seconds
[    0.912750] EXT4-fs (xvda2): delayed allocation enabled
[    0.912755] EXT4-fs: file extents enabled
[    0.913794] EXT4-fs: mballoc enabled
[    0.913815] EXT4-fs (xvda2): recovery complete
[    0.915402] EXT4-fs (xvda2): mounted filesystem with ordered data mode
[    3.396616] udev: starting version 145
[    3.889454] Initialising Xen virtual ethernet driver.
[    4.308282] type=1505 audit(1251553055.888:2): operation="profile_load" pid=1091 name=/sbin/dhclient3
[    4.308737] type=1505 audit(1251553055.888:3): operation="profile_load" pid=1091 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.308981] type=1505 audit(1251553055.888:4): operation="profile_load" pid=1091 name=/usr/lib/connman/scripts/dhclient-script
[    5.277404] lp: driver loaded but no devices found
[root@ServerXen boris]# vi karmic.cfg
[root@ServerXen boris]# xm create -c karmic.cfg
Using config file "./karmic.cfg".
Started domain Ubuntu910PV (id=44)
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-5-server (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1) ) #24-Ubuntu SMP Sat Aug 1 13:47:41 UTC 2009 (Ubuntu 2.6.31-5.24-server)
[    0.000000] Command line: root=/dev/xvda2 ro xencons=tty
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000080000000 (usable)
[    0.000000] DMI not present or invalid.
[    0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 00000000000a0000 (usable)
[    0.000000]  modified: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000080000000 (usable)
[    0.000000] init_memory_mapping: 0000000000000000-0000000080000000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000] RAMDISK: 019d7000 - 02e02000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000080000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000]   NODE_DATA [0000000000008000 - 000000000000cfff]
[    0.000000]   bootmap [000000000000d000 -  000000000001cfff] pages 10
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0080000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0003205000 - 0003222000]   XEN PAGETABLES ==> [0003205000 - 0003222000]
[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #3 [0001000000 - 00019b6094]    TEXT DATA BSS ==> [0001000000 - 00019b6094]
[    0.000000]   #4 [00019d7000 - 0002e02000]          RAMDISK ==> [00019d7000 - 0002e02000]
[    0.000000]   #5 [0002e02000 - 0003205000]   XEN START INFO ==> [0002e02000 - 0003205000]
[    0.000000]   #6 [0000100000 - 00004e3000]          PGTABLE ==> [0000100000 - 00004e3000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00080000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocated 22 4k pages, static data 89952 bytes
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516021
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/xvda2 ro xencons=tty
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 2028856k/2097152k available (5257k kernel code, 404k absent, 67892k reserved, 2980k data, 652k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:4352 nr_irqs:288
[    0.000000] Detected 2833.010 MHz processor.
[    0.010000] Console: colour dummy device 80x25
[    0.010000] console [tty0] enabled
[    0.010000] console [hvc0] enabled
[    0.010000] allocated 20971520 bytes of page_cgroup
[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.010000] installing Xen timer for CPU 0
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.02 BogoMIPS (lpj=28330100)
[    0.010000] Security Framework initialized
[    0.010000] AppArmor: AppArmor initialized
[    0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010000] Mount-cache hash table entries: 256
[    0.010000] Initializing cgroup subsys ns
[    0.010000] Initializing cgroup subsys cpuacct
[    0.010000] Initializing cgroup subsys memory
[    0.010000] Initializing cgroup subsys freezer
[    0.010000] Initializing cgroup subsys net_cls
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 6144K
[    0.010000] CPU 0/0x2 -> Node 0
[    0.010000] CPU: Unsupported number of siblings 4
[    0.010000] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only.
[    0.010000] SMP alternatives: switching to UP code
[    0.010061] cpu 0 spinlock event irq 1
[    0.010292] installing Xen timer for CPU 1
[    0.010307] cpu 1 spinlock event irq 7
[    0.010334] SMP alternatives: switching to SMP code
[    0.000012] Initializing CPU#1
[    0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000058] CPU: L2 cache: 6144K
[    0.000061] CPU 1/0x2 -> Node 0
[    0.000063] CPU: Unsupported number of siblings 4
[    0.020100] Brought up 2 CPUs
[    0.020445] Booting paravirtualized kernel on Xen
[    0.020450] Xen version: 3.4.1 (preserve-AD)
[    0.020598] Grant table initialized
[    0.020602] regulator: core version 0.5
[    0.040649] Time: 165:165:165  Date: 165/165/65
[    0.040697] NET: Registered protocol family 16
[    0.040744] PCI: Fatal: No config space access function found
[    0.050842] bio: create slab <bio-0> at 0
[    0.050996] ACPI: Interpreter disabled.
[    0.051049] xen_balloon: Initialising balloon driver.
[    0.051049] SCSI subsystem initialized
[    0.051049] usbcore: registered new interface driver usbfs
[    0.051049] usbcore: registered new interface driver hub
[    0.051049] usbcore: registered new device driver usb
[    0.051141] PCI: System does not support PCI
[    0.051146] PCI: System does not support PCI
[    0.100217] Bluetooth: Core ver 2.15
[    0.100236] NET: Registered protocol family 31
[    0.100236] Bluetooth: HCI device and connection manager initialized
[    0.100236] Bluetooth: HCI socket layer initialized
[    0.100236] NET: Registered protocol family 8
[    0.100236] NET: Registered protocol family 20
[    0.100236] NetLabel: Initializing
[    0.100236] NetLabel:  domain hash size = 128
[    0.100236] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.100236] NetLabel:  unlabeled traffic allowed by default
[    0.101831] pnp: PnP ACPI: disabled
[    0.101865] AppArmor: AppArmor Filesystem Enabled
[    0.101865] NET: Registered protocol family 2
[    0.101865] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.101865] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.102563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.102887] TCP: Hash tables configured (establ[    0.144578] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.149162] VFS: Disk quotas dquot_6.5.2
[    0.149294] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150916] fuse init (API version 7.12)
[    0.151105] msgmni has been set to 4136
[    0.151474] alg: No test for stdrng (krng)
[    0.151513] io scheduler noop registered
[    0.151520] io scheduler anticipatory registered
[    0.151524] io scheduler deadline registered (default)
[    0.151629] io scheduler cfq registered
[    0.151852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.151993] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.158271] Linux agpgart interface v0.103
[    0.158282] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.158690] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[    0.160781] brd: module loaded
[    0.161725] loop: module loaded
[    0.161923] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.164098] Fixed MDIO Bus: probed
[    0.164110] PPP generic driver version 2.4.2
[    0.164317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.164370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.164415] uhci_hcd: USB Universal Host Controller Interface driver
[    0.164688] PNP: No PS/2 controller found. Probing ports directly.
[    0.165516] i8042.c: No controller found.
[    0.165655] mice: PS/2 mouse device common for all mice
[    0.165804] rtc_cmos: probe of rtc_cmos failed with error -16
[    0.166064] device-mapper: uevent: version 1.0.3
[    0.166196] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[    0.166275] device-mapper: multipath: version 1.1.0 loaded
[    0.166287] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.166479] cpuidle: using governor ladder
[    0.166484] cpuidle: using governor menu
[    0.166800] TCP cubic registered
[    0.167040] NET: Registered protocol family 10
[    0.167408] lo: Disabled Privacy Extensions
[    0.167618] NET: Registered protocol family 17
[    0.167671] Bluetooth: L2CAP ver 2.13
[    0.167675] Bluetooth: L2CAP socket layer initialized
[    0.167680] Bluetooth: SCO (Voice Link) ver 0.6
[    0.167684] Bluetooth: SCO socket layer initialized
[    0.167705] Bluetooth: RFCOMM socket layer initialized
[    0.167713] Bluetooth: RFCOMM TTY layer initialized
[    0.167717] Bluetooth: RFCOMM ver 1.11
[    0.167733] lib80211: common routines for IEEE802.11 drivers
[    0.167923] registered taskstats version 1
[    0.167939] XENBUS: Device with no driver: device/vbd/51712
[    0.167944] XENBUS: Device with no driver: device/vif/0
[    0.167948] XENBUS: Device with no driver: device/console/0
[    0.167961]   Magic number: 1:252:3141
[    0.167980] /build/buildd/linux-2.6.31/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    0.167987] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.167991] EDD information not available.
[    0.168060] Freeing unused kernel memory: 652k freed
[    0.168234] Write protecting the kernel read-only data: 7504k
Loading, please wait...
FATAL: Error inserting i915 (/lib/modules/2.6.31-5-server/kernel/drivers/gpu/drm/i915/i915.ko): No such device
Couldn't get a file descriptor referring to the console
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
[    0.401851] blkfront: xvda: barriers enabled
[    0.402216]  xvda: xvda1 xvda2 xvda3
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
Done.
Begin: Running /scripts/local-premount ...
19+0 records in
19+0 records out
kinit: name_to_dev_t(/dev/disk/by-uuid/920842e4-dfb2-4e0c-acd5-ff8b65b99cab) = dev(202,3)
kinit: trying to resume from /dev/disk/by-uuid/920842e4-dfb2-4e0c-acd5-ff8b65b99cab
[    0.810309] PM: Starting manual resume from disk
kinit: No resume image, doing normal boot...
Done.
[    0.816448] EXT4-fs (xvda2): INFO: recovery required on readonly filesystem
[    0.816466] EXT4-fs (xvda2): write access will be enabled during recovery
[    0.823537] EXT4-fs (xvda2): barriers enabled
[    0.880692] kjournald2 starting: pid 811, dev xvda2:8, commit interval 5 seconds
[    0.880704] EXT4-fs (xvda2): delayed allocation enabled
[    0.880716] EXT4-fs: file extents enabled
[    0.881756] EXT4-fs: mballoc enabled
[    0.881773] EXT4-fs (xvda2): recovery complete
[    0.883112] EXT4-fs (xvda2): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
 * Setting preliminary keymap...                                         [ OK ]
 * Starting kernel event manager...                                             [    3.762017] udev: starting version 145
                                                                         [ OK ]
 * Loading hardware drivers...                                                  [    3.938445] Initialising Xen virtual ethernet driver.
[    4.465420] type=1505 audit(1251553504.939:2): operation="profile_load" pid=1054 name=/sbin/dhclient3
[    4.465878] type=1505 audit(1251553504.939:3): operation="profile_load" pid=1054 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    4.466122] type=1505 audit(1251553504.939:4): operation="profile_load" pid=1054 name=/usr/lib/connman/scripts/dhclient-script
                                                                         [ OK ]
 * Loading kernel modules...                                                     * Loading manual drivers...                                                    [    6.498613] lp: driver loaded but no devices found
                                                                         [ OK ]
 * Setting kernel variables (/etc/sysctl.conf)...                        [ OK ]
 * Setting kernel variables (/etc/sysctl.d/10-console-messages.conf)...  [ OK ]
 * Setting kernel variables (/etc/sysctl.d/10-network-security.conf)...  [ OK ]
 * Activating swap...                                                    [ OK ]
 * Checking root file system...                                                 fsck from util-linux-ng 2.16
/dev/xvda2: clean, 222657/1826816 files, 2495155/7299534 blocks (check in 5 mounts)
                                                                         [ OK ]
 * Checking file systems...                                                     fsck from util-linux-ng 2.16
/dev/xvda1: recovering journal
/dev/xvda1: clean, 173/61312 files, 27654/244983 blocks
                                                                         [ OK ]
 * Mounting local filesystems...                                         [ OK ]
 * Activating swapfile swap...                                           [ OK ]
 * Cleaning up temporary files...                                        [ OK ]
 * Starting AppArmor profiles                                            [ OK ]
 * Skip starting firewall: ufw (not enabled)...                          [ OK ]
 * Configuring network interfaces...                                     [ OK ]
 * Cleaning up temporary files...                                        [ OK ]
 * Setting up console font and keymap...                                 [ OK ]
 * Starting enhanced syslogd rsyslogd                                    [ OK ]
 * Starting system message bus dbus                                      [ OK ]
 * Starting OpenBSD Secure Shell server sshd                             [ OK ]
 * Starting database server couchdb                                      [ OK ]
 * Starting Kernel Oops catching service kerneloops                              [Inactive by user preference]                                           [ OK ]
Not starting speech-dispatcher, as /etc/default/speech-dispatcher does not
have RUN_SPEECHD=yes.
 * Starting Hardware abstraction layer hald                              [ OK ]
 * Starting GNOME Display Manager...                                     [ OK ]
 * Starting network connection manager NetworkManager                    [ OK ]
 * Starting Avahi mDNS/DNS-SD Daemon avahi-daemon                        [ OK ]
 * Starting Common Unix Printing System: cupsd                                  cupsd: Child exited on signal 15!
cupsctl: Unable to connect to server: Connection refused
                                                                         [ OK ]
 * PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned
 * Restarting OpenBSD Secure Shell server sshd
 * Starting anac(h)ronistic cron anacron                                 [ OK ]
 * Starting deferred execution scheduler atd                             [ OK ]
 * Starting periodic command scheduler cron                              [ OK ]
 * Enabling additional executable binary formats binfmt-support          [ OK ]
 * Checking battery state...                                             [ OK ]

Stop - no login prompt


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.