[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Dom0 crashes on ubuntu 9.04 Server



Hi Boris,
       Thanks for your reply. I tried it again but still got a slow download speed though I have a 100MBit/sec connection. I think the root cause is the limitation of the inbound bandwidth in China. So would you please send me a copy of xen.git archive via email (superymkxen@xxxxxxxxxxx)? I can update it in the future for the traffic is much smaller than checking out the whole bulk.

Thanks,
Miao


Date: Sat, 10 Oct 2009 04:23:51 -0700
From: bderzhavets@xxxxxxxxx
Subject: RE: [Xen-users] Dom0 crashes on ubuntu 9.04 Server
To: xen-users@xxxxxxxxxxxxxxxxxxx; superymkxen@xxxxxxxxxxx
CC:

# git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-xen

is running on my box via 2MBit/sec ADSL connection with average speed 1.0-1.2 MBit/sec.

Boris.

--- On Sat, 10/10/09, SuperymkSuperymk <superymkxen@xxxxxxxxxxx> wrote:

From: SuperymkSuperymk <superymkxen@xxxxxxxxxxx>
Subject: RE: [Xen-users] Dom0 crashes on ubuntu 9.04 Server
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Saturday, October 10, 2009, 6:57 AM


Thank you for your suggestion. I am trying again now. But I find that it is very slow to check out a private shadow from both http://www.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git   and    git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git. The speed is even less than 0.5K/s. Is there any workaround way for this?

Thanks,
Miao

Date: Sat, 10 Oct 2009 01:08:09 -0700
From: bderzhavets@xxxxxxxxx
Subject: Re: [Xen-users] Dom0 crashes on ubuntu 9.04 Server
To: xen-users@xxxxxxxxxxxxxxxxxxx; superymkxen@xxxxxxxxxxx

> [& nbsp;   2.930145] scsi0 : ata_piix
> [    2.930263] scsi1 : ata_piix
> [    2.934808] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
> [    2.934872] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18>


1. Try to  turn your South Bridge (ICH10R most probably) into AHCI mode.
   Lines above would better to report :-
   [    2.930145] scsi0 :  ahci
    [    2.930263] scsi1 :  ahci

but, not necessary.

2. Install  2.6.31.1 pvops  kernel via JF's Git Repo as Dom0 kernel.
   The most recent build guide lines:-
      http://www.linuxtoday.com/high_performance/2009100500135OSSV
   Just DRM activation is up to you.
 
   I would not hesitate (in case of failure configuration above) to  escalate issue to xen-devel mailing list.
   2.6.31.1  install is a must if you want professional support@xen-devel.
    Xenified aka Suse 2.6.30.2 won't be a fair , sorry.
Next official Xen release is supposed to have JF's pvops kernel 2.6.3(x).y  to support Xen at  Dom0


Boris.

--- On Sat, 10/10/09, superymkxen@xxxxxxxxxxx <superymkxen@xxxxxxxxxxx> wrote:

From: superymkxen@xxxxxxxxxxx <superymkxen@xxxxxxxxxxx>
Subject: [Xen-users] Dom0 crashes on ubuntu 9.04 Server
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Saturday, October 10, 2009, 2:42 AM

Hi,

I tried to build xen 3.4.1 and the xenified kernel (use the full 2.6.30.2 kernel and patched it manually) on my optiplex 960 box according to the Bderzhavets’s Building Xen 3.4.1 Dom0 via xenified 2.6.30.2 kernel on top Ubuntu 9.04 Server. However, the screen turns black without any response after displaying some [OK] from Dom0. Anyone knows how to resolve this problem? Or tell me any other way to build xen 3.3.1 above including Dom0 kernel for I need to modify the source files for my private experiment. Any suggestion is warmly welcomed.

Thanks!

Complete boot log below:

 __  __            _____ _  _    _
 \ \/ /___ _ __   |___ /| || |  / |
  \  // _ \ '_ \    |_ \| || |_ | |
  /  \  __/ | | |  ___) |__   _|| |
 /_/\_\___|_| |_| |____(_) |_|(_)_|
                                  
(XEN) Xen version 3.4.1 (root@) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) Fri Oct  9 20:35:16 CST 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: loglvl=all guest_loglvl=all debug_stack_lines=80 com1=115200,8n1 console=vga,com1
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000007d9ffc00 (usable)
(XEN)  000000007d9ffc00 - 000000007da53c00 (ACPI NVS)
(XEN)  000000007da53c00 - 000000007da55c00 (ACPI data)
(XEN)  000000007da55c00 - 0000000080000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fed00400 (reserved)
(XEN)  00000000fed20000 - 00000000feda0000 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2009MB (2057848kB)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL  )
(XEN) ACPI: XSDT 000FC7CD, 006C (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: FACP 000FC8FD, 00F4 (r3 DELL    B10K          15 ASL        61)
(XEN) ACPI: DSDT FFE9CFCA, 545E (r1   DELL    dt_ex     1000 INTL 20050624)
(XEN) ACPI: FACS 7D9FFC00, 0040
(XEN) ACPI: SSDT FFEA2700, 009A (r1   DELL    st_ex     1000 INTL 20050624)
(XEN) ACPI: APIC 000FC9F1, 0092 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: BOOT 000FCA83, 0028 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: ASF! 000FCAAB, 0096 (r32 DELL    B10K          15 ASL        61)
(XEN) ACPI: MCFG 000FCB41, 003E (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: HPET 000FCB7F, 0038 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: TCPA 000FCDDB, 0032 (r1 DELL    B10K          15 ASL        61)
(XEN) ACPI: DMAR 000FCE0D, 00F8 (r1 DELL    B10K          15 ASL        61)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000007d9ff000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI:                  wakeup_vec[7d9ffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 3325.078 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Core(TM)2 Duo CPU     E8600  @ 3.33GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Duo CPU     E8600  @ 3.33GHz stepping 0a
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) I/O virtualisation disabled
(XEN) HPET: 8 timers in total, 2 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 64-bit, lsb, compat32
(XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff80bb6000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000060000000->0000000070000000 (410960 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80200000->ffffffff80bb6000
(XEN)  Init. ramdisk: ffffffff80bb6000->ffffffff89e83c00
(XEN)  Phys-Mach map: ffffe20000000000->ffffe200003a2a80
(XEN)  Start info:    ffffffff89e84000->ffffffff89e844b4
(XEN)  Page tables:   ffffffff89e85000->ffffffff89ed8000
(XEN)  Boot stack:    ffffffff89ed8000->ffffffff89ed9000
(XEN)  TOTAL:         ffffffff80000000->ffffffff8a000000
(XEN)  ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 132kB init memory.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30.2 (root@SuperYMK) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Fri Oct 9 19:06:09 CST 2009
[    0.000000] Command line: root=UUID=325643d7-b21f-4c04-a21d-4000b1455c15 ro console=tty0,ttyS0 dom0_mem=1024M  xencons=ttyS0,115200
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Xen-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 0000000074d50000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0x74d50 max_arch_pfn = 0x80000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000074d50000
[    0.000000] RAMDISK: 00bb6000 - 09e83c00
[    0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000000fc7cd 0006C (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: FACP 00000000000fc8fd 000F4 (v03 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: DSDT 00000000ffe9cfca 0545E (v01   DELL    dt_ex 00001000 INTL 20050624)
[    0.000000] ACPI: FACS 000000007d9ffc00 00040
[    0.000000] ACPI: SSDT 00000000ffea2700 0009A (v01   DELL    st_ex 00001000 INTL 20050624)
[    0.000000] ACPI: APIC 00000000000fc9f1 00092 (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: BOOT 00000000000fca83 00028 (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: ASF! 00000000000fcaab 00096 (v32 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: MCFG 00000000000fcb41 0003E (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: HPET 00000000000fcb7f 00038 (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: TCPA 00000000000fcddb 00032 (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] ACPI: DMAR 00000000000fce0d 000F8 (v01 DELL    B10K    00000015 ASL  00000061)
[    0.000000] (5 early reservations) ==> bootmem [0000000000 - 0074550000]
[    0.000000]   #0 [0000bb6000 - 0009ed8000]     Xen provided ==> [0000bb6000 - 0009ed8000]
[    0.000000]   #1 [0000200000 - 0000b95af8]    TEXT DATA BSS ==> [0000200000 - 0000b95af8]
[    0.000000]   #2 [0010000000 - 00103a6000]          INITP2M ==> [0010000000 - 00103a6000]
[    0.000000]   #3 [0000b96000 - 0000b961f0]              BRK ==> [0000b96000 - 0000b961f0]
[    0.000000]   #4 [0009ed8000 - 000a282000]          PGTABLE ==> [0009ed8000 - 000a282000]
[    0.000000] found SMP MP-table at [ffffffffff5fa710] 000fe710
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00074550
[    0.000000]     0: 0x00074d50 -> 0x00074d50
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocated 11 4k pages, static data 43040 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 469953
[    0.000000] Kernel command line: root=UUID=325643d7-b21f-4c04-a21d-4000b1455c15 ro console=tty0,ttyS0 dom0_mem=1024M  xencons=ttyS0,115200
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:2624
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Xen reported: 3325.078 MHz processor.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console [tty0] enabled
[    0.010000] console [ttyS-1] enabled
[    0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.010000] allocated 19141760 bytes of page_cgroup
[    0.010000] please try cgroup_disable=memory option if you don't want
[    0.010000] Software IO TLB enabled:
[    0.010000]  Aperture:     2 megabytes
[    0.010000]  Address size: 22 bits
[    0.010000]  Kernel range: ffff88000d53f000 - ffff88000d73f000
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000] Memory: 1687420k/1914176k available (4945k kernel code, 8192k absent, 218284k reserved, 2352k data, 356k init)
[    0.010000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.450001] Calibrating delay using timer specific routine.. 6652.32 BogoMIPS (lpj=33261612)
[    0.450149] Security Framework initialized
[    0.450211] SELinux:  Disabled at boot.
[    0.450271] Mount-cache hash table entries: 256
[    0.450441] Initializing cgroup subsys ns
[    0.450501] Initializing cgroup subsys cpuacct
[    0.450561] Initializing cgroup subsys memory
[    0.450622] Initializing cgroup subsys freezer
[    0.450695] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.450788] CPU: L2 cache: 6144K
[    0.450849] SMP alternatives: switching to UP code
[    0.471287] ACPI: Core revision 20090320
[    0.712908] SMP alternatives: switching to SMP code
[    0.733298] Brought up 2 CPUs
[    0.733296] Initializing CPU#1
[    0.733296] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.733296] CPU: L2 cache: 6144K
[    0.740005] net_namespace: 1888 bytes
[    0.740005] regulator: core version 0.5
[    0.740005] Time: 13:42:36  Date: 10/10/09
[    0.740005] NET: Registered protocol family 16
[    0.740005] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.740005] ACPI: bus type pci registered
[    0.740005] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.740005] PCI: MCFG area at e0000000 reserved in E820
[    0.770565] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.770624] PCI: Using configuration type 1 for base access
[    0.771136] bio: create slab <bio-0> at 0
[    0.831163] ACPI: BIOS _OSI(Linux) query ignored
[    0.856036] ACPI: Interpreter enabled
[    0.856091] ACPI: (supports S0 S3 S5)
[    0.856250] ACPI: Using IOAPIC for interrupt routing
[    0.950945] ACPI Warning (tbutils-0246): Incorrect checksum in table [TCPA] - 00, should be 7F [20090320]
[    0.955198] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.955262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.955452] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.955512] pci 0000:00:01.0: PME# disabled
[    0.955868] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.955928] pci 0000:00:19.0: PME# disabled
[    0.956397] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.956457] pci 0000:00:1a.7: PME# disabled
[    0.956637] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.956697] pci 0000:00:1b.0: PME# disabled
[    0.956826] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.956886] pci 0000:00:1c.0: PME# disabled
[    0.957018] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.957078] pci 0000:00:1c.1: PME# disabled
[    0.957559] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.957620] pci 0000:00:1d.7: PME# disabled
[    0.958399] pci 0000:00:1e.0: transparent bridge
[    2.201266] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    2.202476] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    2.203676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    2.204873] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    2.206157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    2.207435] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    2.208641] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    2.209862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    2.210516] xen_mem: Initialising balloon driver.
[    2.210676] SCSI subsystem initialized
[    2.210821] usbcore: registered new interface driver usbfs
[    2.210885] usbcore: registered new interface driver hub
[    2.210954] usbcore: registered new device driver usb
[    2.211086] ACPI: WMI: Mapper loaded
[    2.211137] PCI: Using ACPI for IRQ routing
[    2.240008] Bluetooth: Core ver 2.15
[    2.240099] NET: Registered protocol family 31
[    2.240167] Bluetooth: HCI device and connection manager initialized
[    2.240233] Bluetooth: HCI socket layer initialized
[    2.240290] NET: Registered protocol family 8
[    2.240344] NET: Registered protocol family 20
[    2.240431] NetLabel: Initializing
[    2.240482] NetLabel:  domain hash size = 128
[    2.240533] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.240595] NetLabel:  unlabeled traffic allowed by default
[    2.270006] pnp: PnP ACPI init
[    2.270079] ACPI: bus type pnp registered
[    2.318568] pnp: PnP ACPI: found 9 devices
[    2.318624] ACPI: ACPI bus type pnp unregistered
[    2.318684] system 00:01: ioport range 0x800-0x85f has been reserved
[    2.318742] system 00:01: ioport range 0xc00-0xc7f has been reserved
[    2.318801] system 00:01: ioport range 0x860-0x8ff has been reserved
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
[    2.319021] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    2.319080] pci 0000:00:01.0:   IO window: disabled
[    2.319137] pci 0000:00:01.0:   MEM window: 0xfe500000-0xfe5fffff
[    2.319197] pci 0000:00:01.0:   PREFETCH window: disabled
[    2.319257] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    2.319314] pci 0000:00:1c.0:   IO window: disabled
[    2.319370] pci 0000:00:1c.0:   MEM window: 0xfe400000-0xfe4fffff
[    2.319429] pci 0000:00:1c.0:   PREFETCH window: disabled
[    2.319491] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    2.319548] pci 0000:00:1c.1:   IO window: disabled
[    2.319605] pci 0000:00:1c.1:   MEM window: 0xfe300000-0xfe3fffff
[    2.319662] pci 0000:00:1c.1:   PREFETCH window: disabled
[    2.319724] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    2.319807] pci 0000:00:1e.0:   IO window: disabled
[    2.319864] pci 0000:00:1e.0:   MEM window: disabled
[    2.319920] pci 0000:00:1e.0:   PREFETCH window: disabled
[    2.319991] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.320064] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.320133] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.320228] NET: Registered protocol family 2
[    2.410058] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    2.410516] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    2.412439] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    2.412979] TCP: Hash tables configured (established 262144 bind 65536)
[    2.413039] TCP reno registered
[    2.440103] NET: Registered protocol family 1
[    2.440252] Trying to unpack rootfs image as initramfs...
[    2.563832] Freeing initrd memory: 150327k freed
[    2.628448] Simple Boot Flag at 0x7a set to 0x1
[    2.628719] audit: initializing netlink socket (disabled)
[    2.628789] type=2000 audit(1255182158.942:1): initialized
[    2.634728] VFS: Disk quotas dquot_6.5.2
[    2.634818] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.635187] fuse init (API version 7.11)
[    2.635288] msgmni has been set to 4016
[    2.635508] alg: No test for stdrng (krng)
[    2.635565] io scheduler noop registered
[    2.635617] io scheduler anticipatory registered
[    2.635672] io scheduler deadline registered (default)
[    2.635733] io scheduler cfq registered
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
[    2.636637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.671200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.671335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.671408] ACPI: Power Button [PWRF]
[    2.671490] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    2.671565] ACPI: Power Button [VBTN]
[    2.673713] No available Cx info for cpu 1
[    2.673797] processor ACPI_CPU:00: registered as cooling_device0
[    2.675360] No available Cx info for cpu 2
[    2.675424] processor ACPI_CPU:01: registered as cooling_device1
[    2.676984] No available Cx info for cpu 3
[    2.677050] processor ACPI_CPU:02: registered as cooling_device2
[    2.678608] No available Cx info for cpu 4
[    2.678670] processor ACPI_CPU:03: registered as cooling_device3
[    2.763259] Linux agpgart interface v0.103
[    2.763711] brd: module loaded
[    2.763943] loop: module loaded
[    2.764037] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    2.764140] Xen virtual console successfully installed as ttyS0
[    2.764214] Event-channel device installed.
[    2.767764] blktap_device_init: blktap device major 252
[    2.767819] blktap_ring_init: blktap ring major: 252
[    2.769472] Driver 'sd' needs updating - please use bus_type methods
[    2.769536] Driver 'sr' needs updating - please use bus_type methods
(XEN) PCI add device 00:1f.2
[    2.769651] ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.769715] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    2.930145] scsi0 : ata_piix
[    2.930263] scsi1 : ata_piix
[    2.934808] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
[    2.934872] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
(XEN) PCI add device 00:1f.5
[    2.934945] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.935008] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    3.090091] scsi2 : ata_piix
[    3.090218] scsi3 : ata_piix
[    3.090317] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
[    3.090379] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
[    3.090768] Fixed MDIO Bus: probed
[    3.090823] PPP generic driver version 2.4.2
[    3.090921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
(XEN) PCI add device 00:1a.7
[    3.090996] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.091070] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.091154] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.095130] ehci_hcd 0000:00:1a.7: debug port 1
[    3.095205] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000
[    3.110009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.110148] usb usb1: configuration #1 chosen from 1 choice
[    3.110237] hub 1-0:1.0: USB hub found
[    3.110295] hub 1-0:1.0: 6 ports detected
(XEN) PCI add device 00:1d.7
[    3.110415] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.110486] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.110567] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.114541] ehci_hcd 0000:00:1d.7: debug port 1
[    3.114612] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
[    3.130008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.130126] usb usb2: configuration #1 chosen from 1 choice
[    3.130217] hub 2-0:1.0: USB hub found
[    3.130277] hub 2-0:1.0: 6 ports detected
[    3.130385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.130451] uhci_hcd: USB Universal Host Controller Interface driver
(XEN) PCI add device 00:1a.0
[    3.130535] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.131112] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.131190] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.131291] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    3.131402] usb usb3: configuration #1 chosen from 1 choice
[    3.131477] hub 3-0:1.0: USB hub found
[    3.131536] hub 3-0:1.0: 2 ports detected
(XEN) PCI add device 00:1a.1
[    3.131643] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.131710] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.131812] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.131912] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    3.132021] usb usb4: configuration #1 chosen from 1 choice
[    3.132091] hub 4-0:1.0: USB hub found
[    3.132150] hub 4-0:1.0: 2 ports detected
(XEN) PCI add device 00:1a.2
[    3.132254] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.132321] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.132402] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.132496] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[    3.132610] usb usb5: configuration #1 chosen from 1 choice
[    3.132681] hub 5-0:1.0: USB hub found
[    3.132740] hub 5-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.0
[    3.132845] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.132911] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.132988] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.133083] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    3.133218] usb usb6: configuration #1 chosen from 1 choice
[    3.133292] hub 6-0:1.0: USB hub found
[    3.133350] hub 6-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.1
[    3.133455] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.133521] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.133599] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.133693] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    3.133801] usb usb7: configuration #1 chosen from 1 choice
[    3.133873] hub 7-0:1.0: USB hub found
[    3.133933] hub 7-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.2
[    3.134041] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.134108] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.134186] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.134279] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    3.134392] usb usb8: configuration #1 chosen from 1 choice
[    3.134463] hub 8-0:1.0: USB hub found
[    3.134552] hub 8-0:1.0: 2 ports detected
[    3.134677] usbcore: registered new interface driver libusual
[    3.134751] usbcore: registered new interface driver usbserial
[    3.134813] USB Serial support registered for generic
[    3.134876] usbcore: registered new interface driver usbserial_generic
[    3.134933] usbserial: USB Serial Driver core
[    3.135008] PNP: No PS/2 controller found. Probing ports directly.
[    3.137663] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.137721] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.137805] mice: PS/2 mouse device common for all mice
[    3.137912] rtc_cmos 00:05: RTC can wake from S4
[    3.137985] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.138062] rtc0: alarms up to one day, 242 bytes nvram
[    3.138166] device-mapper: uevent: version 1.0.3
[    3.138257] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    3.138395] device-mapper: multipath: version 1.0.5 loaded
[    3.138454] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.138776] TCP cubic registered
[    3.138896] NET: Registered protocol family 10
[    3.139201] lo: Disabled Privacy Extensions
[    3.139418] NET: Registered protocol family 17
[    3.139494] Bridge firewalling registered
[    3.139558] Bluetooth: L2CAP ver 2.13
[    3.139611] Bluetooth: L2CAP socket layer initialized
[    3.139667] Bluetooth: SCO (Voice Link) ver 0.6
[    3.139721] Bluetooth: SCO socket layer initialized
[    3.139789] Bluetooth: RFCOMM socket layer initialized
[    3.139847] Bluetooth: RFCOMM TTY layer initialized
[    3.139903] Bluetooth: RFCOMM ver 1.11
[    3.140006] registered taskstats version 1
[    3.140148] PCI IO multiplexer device installed.
[    3.140211]   Magic number: 13:836:735
[    3.140313] rtc_cmos 00:05: setting system clock to 2009-10-10 13:42:39 UTC (1255182159)
[    3.140389] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    3.451160] ata3: SATA link down (SStatus 4 SControl 300)
[    3.710007] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    3.790157] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.790244] ata1.01: SATA link down (SStatus 4 SControl 300)
[    3.811151] ata1.00: ATA-8: WDC WD2500AAJS-75M0A0, 01.03E01, max UDMA/133
[    3.811229] ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    3.831182] ata1.00: configured for UDMA/133
[    3.831375] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-7 01.0 PQ: 0 ANSI: 5
[    3.831499] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.831585] sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors: (250 GB/232 GiB)
[    3.831664] sd 0:0:0:0: [sda] Write Protect is off
[    3.831733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.831863]  sda: sda1 sda2 < sda5 sda6<6>usb 3-2: configuration #1 chosen from 1 choice
[    3.883831]  sda7 sda8 >
[    3.900246] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.160010] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    4.340045] usb 4-1: configuration #1 chosen from 1 choice
[    4.690089] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.690182] ata2.01: SATA link down (SStatus 4 SControl 300)
[    4.710219] ata2.00: ATAPI: PLDS DVD+/-RW DH-16A6S, YD12, max UDMA/100
[    4.750232] ata2.00: configured for UDMA/100
[    4.753351] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DH-16A6S YD12 PQ: 0 ANSI: 5
[    4.759615] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.759705] Uniform CD-ROM driver Revision: 3.20
[    4.759848] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.100054] ata4: SATA link down (SStatus 4 SControl 300)
[    5.100246] Freeing unused kernel memory: 356k freed
[    5.100413] Write protecting the kernel read-only data: 6844k
[    5.264178] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[    5.264249] e1000e: Copyright (c) 1999-2008 Intel Corporation.
(XEN) PCI add device 00:19.0
[    5.264382] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    5.300624] usbcore: registered new interface driver hiddev
[    5.314644] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[    5.314797] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-2/input0
[    5.329490] input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[    5.329635] generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1a.1-1/input0
[    5.329743] usbcore: registered new interface driver usbhid
[    5.329800] usbhid: v2.6:USB HID core driver
[    5.382609] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:19:34:48:18
[    5.382704] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    5.382828] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff
[    6.108564] kjournald starting.  Commit interval 5 seconds
[    6.108571] EXT3-fs: mounted filesystem with writeback data mode.
[    9.776151] udev: starting version 141
[   11.242941] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   11.870370] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.918561] parport_pc 00:06: reported by Plug and Play ACPI
[   11.918684] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[   12.058030] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   12.194739] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   12.223050] iTCO_vendor_support: vendor-support=0
[   12.234209] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   12.234328] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[   12.234429] iTCO_wdt: No card detected
(XEN) PCI add device 00:00.0
[   12.251581] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[   12.253079] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[   12.255661] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   12.265331] ppdev: user-space parallel port driver
(XEN) PCI add device 00:1b.0
[   12.623704] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.099018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[   13.221329] lp0: using parport0 (interrupt-driven).

The machine hangs here.

 

My Optiplex 960 box:

Ubuntu 9.04 Server

E8600

2G DDR 800 RAM

 

-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



使用新一代 Windows Live Messenger 轻松交流和共享! 立刻下载!

-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



使用新一代 Windows Live Messenger 轻松交流和共享! 立刻下载!
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.