Hi,
I tried to build xen
3.4.1 and the xenified kernel (use the full 2.6.30.2 kernel and patched it
manually) on my optiplex 960 box according to the Bderzhavets’s Building Xen 3.4.1 Dom0 via xenified 2.6.30.2 kernel
on top Ubuntu 9.04 Server. However, the screen turns black without
any response after displaying some [OK] from Dom0. Anyone knows how to resolve
this problem? Or tell me any other way to build xen 3.3.1 above including Dom0
kernel for I need to modify the source files for my private experiment. Any
suggestion is warmly welcomed.
Complete boot log below:
__
__ _____
_ _ _
\ \/ /___ _ __ |___ /| || | /
|
\ // _ \ '_ \ |_ \| ||
|_ | |
/ \ __/ | | | ___)
|__ _|| |
/_/\_\___|_| |_| |____(_) |_|(_)_|
(XEN) Xen version 3.4.1 (root@) (gcc version 4.3.3
(Ubuntu 4.3.3-5ubuntu4) ) Fri Oct 9 20:35:16 CST 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: loglvl=all guest_loglvl=all
debug_stack_lines=80 com1=115200,8n1 console=vga,com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1
seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00
(usable)
(XEN) 00000000000f0000 - 0000000000100000
(reserved)
(XEN) 0000000000100000 - 000000007d9ffc00
(usable)
(XEN) 000000007d9ffc00 - 000000007da53c00 (ACPI
NVS)
(XEN) 000000007da53c00 - 000000007da55c00 (ACPI
data)
(XEN) 000000007da55c00 - 0000000080000000
(reserved)
(XEN) 00000000e0000000 - 00000000f0000000
(reserved)
(XEN) 00000000fec00000 - 00000000fed00400
(reserved)
(XEN) 00000000fed20000 - 00000000feda0000
(reserved)
(XEN) 00000000fee00000 - 00000000fef00000
(reserved)
(XEN) 00000000ffb00000 - 0000000100000000
(reserved)
(XEN) System RAM: 2009MB (2057848kB)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FC7CD, 006C (r1
DELL
B10K 15
ASL 61)
(XEN) ACPI: FACP 000FC8FD, 00F4 (r3
DELL
B10K 15
ASL 61)
(XEN) ACPI: DSDT FFE9CFCA, 545E (r1
DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS 7D9FFC00, 0040
(XEN) ACPI: SSDT FFEA2700, 009A (r1
DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FC9F1, 0092 (r1
DELL
B10K 15
ASL 61)
(XEN) ACPI: BOOT 000FCA83, 0028 (r1
DELL
B10K 15
ASL 61)
(XEN) ACPI: ASF! 000FCAAB, 0096 (r32
DELL
B10K 15
ASL 61)
(XEN) ACPI: MCFG 000FCB41, 003E (r1
DELL B10K 15
ASL 61)
(XEN) ACPI: HPET 000FCB7F, 0038 (r1
DELL
B10K 15
ASL 61)
(XEN) ACPI: TCPA 000FCDDB, 0032 (r1
DELL
B10K 15
ASL 61)
(XEN) ACPI: DMAR 000FCE0D, 00F8 (r1
DELL
B10K 15
ASL 61)
(XEN) NUMA turned off
(XEN) Faking a node at
0000000000000000-000000007d9ff000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0],
pm1x_evt[800,0]
(XEN)
ACPI:
wakeup_vec[7d9ffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01]
enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03]
disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level
lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000]
gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address
0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1
I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration
information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 3325.078 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Core(TM)2 Duo
CPU E8600 @ 3.33GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Duo
CPU E8600 @ 3.33GHz stepping 0a
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1
pin2=-1
(XEN) checking TSC synchronization across 2 CPUs:
passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) I/O virtualisation disabled
(XEN) HPET: 8 timers in total, 2 timers will be used
for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer
started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr
0xffffffff80200000 -> 0xffffffff80bb6000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.:
0000000060000000->0000000070000000 (410960 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel:
ffffffff80200000->ffffffff80bb6000
(XEN) Init. ramdisk:
ffffffff80bb6000->ffffffff89e83c00
(XEN) Phys-Mach map:
ffffe20000000000->ffffe200003a2a80
(XEN) Start info:
ffffffff89e84000->ffffffff89e844b4
(XEN) Page tables:
ffffffff89e85000->ffffffff89ed8000
(XEN) Boot stack:
ffffffff89ed8000->ffffffff89ed9000
(XEN)
TOTAL: ffffffff80000000->ffffffff8a000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
times to switch input to Xen)
(XEN) Freed 132kB init memory.
[ 0.000000] Initializing cgroup
subsys cpuset
[ 0.000000] Initializing cgroup
subsys cpu
[ 0.000000] Linux version 2.6.30.2
(root@SuperYMK) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Fri Oct 9
19:06:09 CST 2009
[ 0.000000] Command line:
root=UUID=325643d7-b21f-4c04-a21d-4000b1455c15 ro console=tty0,ttyS0
dom0_mem=1024M xencons=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel
GenuineIntel
[ 0.000000] AMD
AuthenticAMD
[ 0.000000] Centaur
CentaurHauls
[ 0.000000] Xen-provided physical
RAM map:
[ 0.000000] Xen:
0000000000000000 - 0000000074d50000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x74d50
max_arch_pfn = 0x80000000
[ 0.000000] init_memory_mapping:
0000000000000000-0000000074d50000
[ 0.000000] RAMDISK: 00bb6000 -
09e83c00
[ 0.000000] ACPI: RSDP
00000000000fec00 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT
00000000000fc7cd 0006C (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: FACP
00000000000fc8fd 000F4 (v03 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT
00000000ffe9cfca 0545E (v01 DELL dt_ex 00001000
INTL 20050624)
[ 0.000000] ACPI: FACS
000000007d9ffc00 00040
[ 0.000000] ACPI: SSDT
00000000ffea2700 0009A (v01 DELL st_ex 00001000
INTL 20050624)
[ 0.000000] ACPI: APIC
00000000000fc9f1 00092 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT
00000000000fca83 00028 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: ASF!
00000000000fcaab 00096 (v32 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG
00000000000fcb41 0003E (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: HPET
00000000000fcb7f 00038 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA
00000000000fcddb 00032 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] ACPI: DMAR
00000000000fce0d 000F8 (v01 DELL B10K
00000015 ASL 00000061)
[ 0.000000] (5 early reservations)
==> bootmem [0000000000 - 0074550000]
[ 0.000000] #0
[0000bb6000 - 0009ed8000] Xen provided ==>
[0000bb6000 - 0009ed8000]
[ 0.000000] #1
[0000200000 - 0000b95af8] TEXT DATA BSS ==> [0000200000 -
0000b95af8]
[ 0.000000] #2
[0010000000 - 00103a6000]
INITP2M ==> [0010000000 - 00103a6000]
[ 0.000000] #3
[0000b96000 -
0000b961f0]
BRK ==> [0000b96000 - 0000b961f0]
[ 0.000000] #4
[0009ed8000 - 000a282000]
PGTABLE ==> [0009ed8000 - 000a282000]
[ 0.000000] found SMP MP-table at
[ffffffffff5fa710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000]
DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32
0x00001000 -> 0x00100000
[ 0.000000]
Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN
for each node
[ 0.000000] early_node_map[2] active
PFN ranges
[ 0.000000]
0: 0x00000000 -> 0x00074550
[ 0.000000] 0:
0x00074d50 -> 0x00074d50
[ 0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC
(acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08]
address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8,
version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for
SMP configuration information
[ 0.000000] Allocating PCI resources
starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:64
nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 11 4k
pages, static data 43040 bytes
[ 0.000000] Built 1 zonelists in
Zone order, mobility grouping on. Total pages: 469953
[ 0.000000] Kernel command line:
root=UUID=325643d7-b21f-4c04-a21d-4000b1455c15 ro console=tty0,ttyS0
dom0_mem=1024M xencons=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:2624
[ 0.000000] PID hash table entries:
4096 (order: 12, 32768 bytes)
[ 0.000000] Xen reported: 3325.078
MHz processor.
[ 0.010000] Console: colour VGA+
80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] console [ttyS-1] enabled
[ 0.010000] Dentry cache hash table
entries: 262144 (order: 9, 2097152 bytes)
[ 0.010000] Inode-cache hash table
entries: 131072 (order: 8, 1048576 bytes)
[ 0.010000] allocated 19141760 bytes
of page_cgroup
[ 0.010000] please try
cgroup_disable=memory option if you don't want
[ 0.010000] Software IO TLB enabled:
[ 0.010000]
Aperture: 2 megabytes
[ 0.010000] Address size: 22
bits
[ 0.010000] Kernel range:
ffff88000d53f000 - ffff88000d73f000
[ 0.010000] PCI-DMA: Using software
bounce buffering for IO (SWIOTLB)
[ 0.010000] Memory:
1687420k/1914176k available (4945k kernel code, 8192k absent, 218284k reserved,
2352k data, 356k init)
[ 0.010000] SLUB: Genslabs=13,
HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.450001] Calibrating delay using
timer specific routine.. 6652.32 BogoMIPS (lpj=33261612)
[ 0.450149] Security Framework
initialized
[ 0.450211] SELinux: Disabled
at boot.
[ 0.450271] Mount-cache hash table
entries: 256
[ 0.450441] Initializing cgroup
subsys ns
[ 0.450501] Initializing cgroup
subsys cpuacct
[ 0.450561] Initializing cgroup
subsys memory
[ 0.450622] Initializing cgroup
subsys freezer
[ 0.450695] CPU: L1 I cache: 32K, L1
D cache: 32K
[ 0.450788] CPU: L2 cache: 6144K
[ 0.450849] SMP alternatives:
switching to UP code
[ 0.471287] ACPI: Core revision
20090320
[ 0.712908] SMP alternatives:
switching to SMP code
[ 0.733298] Brought up 2 CPUs
[ 0.733296] Initializing CPU#1
[ 0.733296] CPU: L1 I cache: 32K, L1
D cache: 32K
[ 0.733296] CPU: L2 cache: 6144K
[ 0.740005] net_namespace: 1888
bytes
[ 0.740005] regulator: core version
0.5
[ 0.740005] Time: 13:42:36
Date: 10/10/09
[ 0.740005] NET: Registered protocol
family 16
[ 0.740005] ACPI FADT declares the
system doesn't support PCIe ASPM, so disable it
[ 0.740005] ACPI: bus type pci
registered
[ 0.740005] PCI: MCFG configuration
0: base e0000000 segment 0 buses 0 - 255
[ 0.740005] PCI: MCFG area at
e0000000 reserved in E820
[ 0.770565] PCI: Using MMCONFIG at
e0000000 - efffffff
[ 0.770624] PCI: Using configuration
type 1 for base access
[ 0.771136] bio: create slab
<bio-0> at 0
[ 0.831163] ACPI: BIOS _OSI(Linux)
query ignored
[ 0.856036] ACPI: Interpreter
enabled
[ 0.856091] ACPI: (supports S0 S3
S5)
[ 0.856250] ACPI: Using IOAPIC for
interrupt routing
[ 0.950945] ACPI Warning
(tbutils-0246): Incorrect checksum in table [TCPA] - 00, should be 7F
[20090320]
[ 0.955198] ACPI: ACPI Dock Station
Driver: 1 docks/bays found
[ 0.955262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.955452] pci 0000:00:01.0: PME#
supported from D0 D3hot D3cold
[ 0.955512] pci 0000:00:01.0: PME#
disabled
[ 0.955868] pci 0000:00:19.0: PME#
supported from D0 D3hot D3cold
[ 0.955928] pci 0000:00:19.0: PME#
disabled
[ 0.956397] pci 0000:00:1a.7: PME#
supported from D0 D3hot D3cold
[ 0.956457] pci 0000:00:1a.7: PME#
disabled
[ 0.956637] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
[ 0.956697] pci 0000:00:1b.0: PME#
disabled
[ 0.956826] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
[ 0.956886] pci 0000:00:1c.0: PME#
disabled
[ 0.957018] pci 0000:00:1c.1: PME#
supported from D0 D3hot D3cold
[ 0.957078] pci 0000:00:1c.1: PME#
disabled
[ 0.957559] pci 0000:00:1d.7: PME#
supported from D0 D3hot D3cold
[ 0.957620] pci 0000:00:1d.7: PME#
disabled
[ 0.958399] pci 0000:00:1e.0:
transparent bridge
[ 2.201266] ACPI: PCI Interrupt Link
[LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.202476] ACPI: PCI Interrupt Link
[LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.203676] ACPI: PCI Interrupt Link
[LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.204873] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.206157] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 2.207435] ACPI: PCI Interrupt Link
[LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.208641] ACPI: PCI Interrupt Link
[LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.209862] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.210516] xen_mem: Initialising
balloon driver.
[ 2.210676] SCSI subsystem
initialized
[ 2.210821] usbcore: registered new
interface driver usbfs
[ 2.210885] usbcore: registered new
interface driver hub
[ 2.210954] usbcore: registered new
device driver usb
[ 2.211086] ACPI: WMI: Mapper loaded
[ 2.211137] PCI: Using ACPI for IRQ
routing
[ 2.240008] Bluetooth: Core ver 2.15
[ 2.240099] NET: Registered protocol
family 31
[ 2.240167] Bluetooth: HCI device
and connection manager initialized
[ 2.240233] Bluetooth: HCI socket
layer initialized
[ 2.240290] NET: Registered protocol
family 8
[ 2.240344] NET: Registered protocol
family 20
[ 2.240431] NetLabel: Initializing
[ 2.240482] NetLabel: domain
hash size = 128
[ 2.240533] NetLabel:
protocols = UNLABELED CIPSOv4
[ 2.240595] NetLabel:
unlabeled traffic allowed by default
[ 2.270006] pnp: PnP ACPI init
[ 2.270079] ACPI: bus type pnp
registered
[ 2.318568] pnp: PnP ACPI: found 9
devices
[ 2.318624] ACPI: ACPI bus type pnp
unregistered
[ 2.318684] system 00:01: ioport
range 0x800-0x85f has been reserved
[ 2.318742] system 00:01: ioport
range 0xc00-0xc7f has been reserved
[ 2.318801] system 00:01: ioport
range 0x860-0x8ff has been reserved
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:02.1
(XEN) PCI add device 00:19.0
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 00:1f.5
[ 2.319021] pci 0000:00:01.0: PCI
bridge, secondary bus 0000:01
[ 2.319080] pci
0000:00:01.0: IO window: disabled
[ 2.319137] pci
0000:00:01.0: MEM window: 0xfe500000-0xfe5fffff
[ 2.319197] pci
0000:00:01.0: PREFETCH window: disabled
[ 2.319257] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:02
[ 2.319314] pci
0000:00:1c.0: IO window: disabled
[ 2.319370] pci
0000:00:1c.0: MEM window: 0xfe400000-0xfe4fffff
[ 2.319429] pci
0000:00:1c.0: PREFETCH window: disabled
[ 2.319491] pci 0000:00:1c.1: PCI
bridge, secondary bus 0000:03
[ 2.319548] pci
0000:00:1c.1: IO window: disabled
[ 2.319605] pci
0000:00:1c.1: MEM window: 0xfe300000-0xfe3fffff
[ 2.319662] pci
0000:00:1c.1: PREFETCH window: disabled
[ 2.319724] pci 0000:00:1e.0: PCI
bridge, secondary bus 0000:04
[ 2.319807] pci
0000:00:1e.0: IO window: disabled
[ 2.319864] pci
0000:00:1e.0: MEM window: disabled
[ 2.319920] pci
0000:00:1e.0: PREFETCH window: disabled
[ 2.319991] pci 0000:00:01.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.320064] pci 0000:00:1c.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.320133] pci 0000:00:1c.1: PCI
INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.320228] NET: Registered protocol
family 2
[ 2.410058] IP route cache hash
table entries: 65536 (order: 7, 524288 bytes)
[ 2.410516] TCP established hash
table entries: 262144 (order: 10, 4194304 bytes)
[ 2.412439] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
[ 2.412979] TCP: Hash tables
configured (established 262144 bind 65536)
[ 2.413039] TCP reno registered
[ 2.440103] NET: Registered protocol
family 1
[ 2.440252] Trying to unpack rootfs
image as initramfs...
[ 2.563832] Freeing initrd memory:
150327k freed
[ 2.628448] Simple Boot Flag at 0x7a
set to 0x1
[ 2.628719] audit: initializing
netlink socket (disabled)
[ 2.628789] type=2000
audit(1255182158.942:1): initialized
[ 2.634728] VFS: Disk quotas
dquot_6.5.2
[ 2.634818] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
[ 2.635187] fuse init (API version
7.11)
[ 2.635288] msgmni has been set to
4016
[ 2.635508] alg: No test for stdrng
(krng)
[ 2.635565] io scheduler noop registered
[ 2.635617] io scheduler
anticipatory registered
[ 2.635672] io scheduler deadline
registered (default)
[ 2.635733] io scheduler cfq
registered
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.1
[ 2.636637] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
[ 2.671200] pciehp: PCI Express Hot
Plug Controller Driver version: 0.4
[ 2.671335] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.671408] ACPI: Power Button
[PWRF]
[ 2.671490] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.671565] ACPI: Power Button
[VBTN]
[ 2.673713] No available Cx info for
cpu 1
[ 2.673797] processor ACPI_CPU:00:
registered as cooling_device0
[ 2.675360] No available Cx info for
cpu 2
[ 2.675424] processor ACPI_CPU:01:
registered as cooling_device1
[ 2.676984] No available Cx info for
cpu 3
[ 2.677050] processor ACPI_CPU:02:
registered as cooling_device2
[ 2.678608] No available Cx info for
cpu 4
[ 2.678670] processor ACPI_CPU:03:
registered as cooling_device3
[ 2.763259] Linux agpgart interface
v0.103
[ 2.763711] brd: module loaded
[ 2.763943] loop: module loaded
[ 2.764037] input: Macintosh mouse
button emulation as /devices/virtual/input/input2
[ 2.764140] Xen virtual console
successfully installed as ttyS0
[ 2.764214] Event-channel device
installed.
[ 2.767764] blktap_device_init:
blktap device major 252
[ 2.767819] blktap_ring_init: blktap
ring major: 252
[ 2.769472] Driver 'sd' needs
updating - please use bus_type methods
[ 2.769536] Driver 'sr' needs
updating - please use bus_type methods
(XEN) PCI add device 00:1f.2
[ 2.769651] ata_piix 0000:00:1f.2:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.769715] ata_piix 0000:00:1f.2:
MAP [ P0 P2 P1 P3 ]
[ 2.930145] scsi0 : ata_piix
[ 2.930263] scsi1 : ata_piix
[ 2.934808] ata1: SATA max UDMA/133
cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
[ 2.934872] ata2: SATA max UDMA/133
cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
(XEN) PCI add device 00:1f.5
[ 2.934945] ata_piix 0000:00:1f.5:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.935008] ata_piix 0000:00:1f.5:
MAP [ P0 -- P1 -- ]
[ 3.090091] scsi2 : ata_piix
[ 3.090218] scsi3 : ata_piix
[ 3.090317] ata3: SATA max UDMA/133
cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
[ 3.090379] ata4: SATA max UDMA/133
cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
[ 3.090768] Fixed MDIO Bus: probed
[ 3.090823] PPP generic driver
version 2.4.2
[ 3.090921] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
(XEN) PCI add device 00:1a.7
[ 3.090996] ehci_hcd 0000:00:1a.7:
PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.091070] ehci_hcd 0000:00:1a.7:
EHCI Host Controller
[ 3.091154] ehci_hcd 0000:00:1a.7:
new USB bus registered, assigned bus number 1
[ 3.095130] ehci_hcd 0000:00:1a.7:
debug port 1
[ 3.095205] ehci_hcd 0000:00:1a.7:
irq 22, io mem 0xfe6da000
[ 3.110009] ehci_hcd 0000:00:1a.7:
USB 2.0 started, EHCI 1.00
[ 3.110148] usb usb1: configuration
#1 chosen from 1 choice
[ 3.110237] hub 1-0:1.0: USB hub
found
[ 3.110295] hub 1-0:1.0: 6 ports
detected
(XEN) PCI add device 00:1d.7
[ 3.110415] ehci_hcd 0000:00:1d.7:
PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.110486] ehci_hcd 0000:00:1d.7:
EHCI Host Controller
[ 3.110567] ehci_hcd 0000:00:1d.7:
new USB bus registered, assigned bus number 2
[ 3.114541] ehci_hcd 0000:00:1d.7:
debug port 1
[ 3.114612] ehci_hcd 0000:00:1d.7:
irq 23, io mem 0xff980000
[ 3.130008] ehci_hcd 0000:00:1d.7:
USB 2.0 started, EHCI 1.00
[ 3.130126] usb usb2: configuration
#1 chosen from 1 choice
[ 3.130217] hub 2-0:1.0: USB hub
found
[ 3.130277] hub 2-0:1.0: 6 ports detected
[ 3.130385] ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
[ 3.130451] uhci_hcd: USB Universal
Host Controller Interface driver
(XEN) PCI add device 00:1a.0
[ 3.130535] uhci_hcd 0000:00:1a.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.131112] uhci_hcd 0000:00:1a.0:
UHCI Host Controller
[ 3.131190] uhci_hcd 0000:00:1a.0:
new USB bus registered, assigned bus number 3
[ 3.131291] uhci_hcd 0000:00:1a.0:
irq 16, io base 0x0000ff20
[ 3.131402] usb usb3: configuration
#1 chosen from 1 choice
[ 3.131477] hub 3-0:1.0: USB hub
found
[ 3.131536] hub 3-0:1.0: 2 ports
detected
(XEN) PCI add device 00:1a.1
[ 3.131643] uhci_hcd 0000:00:1a.1:
PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.131710] uhci_hcd 0000:00:1a.1:
UHCI Host Controller
[ 3.131812] uhci_hcd 0000:00:1a.1:
new USB bus registered, assigned bus number 4
[ 3.131912] uhci_hcd 0000:00:1a.1:
irq 17, io base 0x0000ff00
[ 3.132021] usb usb4: configuration
#1 chosen from 1 choice
[ 3.132091] hub 4-0:1.0: USB hub
found
[ 3.132150] hub 4-0:1.0: 2 ports
detected
(XEN) PCI add device 00:1a.2
[ 3.132254] uhci_hcd 0000:00:1a.2:
PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.132321] uhci_hcd 0000:00:1a.2:
UHCI Host Controller
[ 3.132402] uhci_hcd 0000:00:1a.2:
new USB bus registered, assigned bus number 5
[ 3.132496] uhci_hcd 0000:00:1a.2:
irq 22, io base 0x0000fc00
[ 3.132610] usb usb5: configuration
#1 chosen from 1 choice
[ 3.132681] hub 5-0:1.0: USB hub
found
[ 3.132740] hub 5-0:1.0: 2 ports
detected
(XEN) PCI add device 00:1d.0
[ 3.132845] uhci_hcd 0000:00:1d.0:
PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.132911] uhci_hcd 0000:00:1d.0:
UHCI Host Controller
[ 3.132988] uhci_hcd 0000:00:1d.0:
new USB bus registered, assigned bus number 6
[ 3.133083] uhci_hcd 0000:00:1d.0:
irq 23, io base 0x0000ff80
[ 3.133218] usb usb6: configuration
#1 chosen from 1 choice
[ 3.133292] hub 6-0:1.0: USB hub
found
[ 3.133350] hub 6-0:1.0: 2 ports
detected
(XEN) PCI add device 00:1d.1
[ 3.133455] uhci_hcd 0000:00:1d.1:
PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.133521] uhci_hcd 0000:00:1d.1:
UHCI Host Controller
[ 3.133599] uhci_hcd 0000:00:1d.1:
new USB bus registered, assigned bus number 7
[ 3.133693] uhci_hcd 0000:00:1d.1:
irq 17, io base 0x0000ff60
[ 3.133801] usb usb7: configuration
#1 chosen from 1 choice
[ 3.133873] hub 7-0:1.0: USB hub
found
[ 3.133933] hub 7-0:1.0: 2 ports
detected
(XEN) PCI add device 00:1d.2
[ 3.134041] uhci_hcd 0000:00:1d.2:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.134108] uhci_hcd 0000:00:1d.2:
UHCI Host Controller
[ 3.134186] uhci_hcd 0000:00:1d.2:
new USB bus registered, assigned bus number 8
[ 3.134279] uhci_hcd 0000:00:1d.2:
irq 18, io base 0x0000ff40
[ 3.134392] usb usb8: configuration
#1 chosen from 1 choice
[ 3.134463] hub 8-0:1.0: USB hub
found
[ 3.134552] hub 8-0:1.0: 2 ports
detected
[ 3.134677] usbcore: registered new
interface driver libusual
[ 3.134751] usbcore: registered new
interface driver usbserial
[ 3.134813] USB Serial support
registered for generic
[ 3.134876] usbcore: registered new
interface driver usbserial_generic
[ 3.134933] usbserial: USB Serial
Driver core
[ 3.135008] PNP: No PS/2 controller
found. Probing ports directly.
[ 3.137663] serio: i8042 KBD port at
0x60,0x64 irq 1
[ 3.137721] serio: i8042 AUX port at
0x60,0x64 irq 12
[ 3.137805] mice: PS/2 mouse device
common for all mice
[ 3.137912] rtc_cmos 00:05: RTC can
wake from S4
[ 3.137985] rtc_cmos 00:05: rtc
core: registered rtc_cmos as rtc0
[ 3.138062] rtc0: alarms up to one
day, 242 bytes nvram
[ 3.138166] device-mapper: uevent:
version 1.0.3
[ 3.138257] device-mapper: ioctl:
4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 3.138395] device-mapper:
multipath: version 1.0.5 loaded
[ 3.138454] device-mapper: multipath
round-robin: version 1.0.0 loaded
[ 3.138776] TCP cubic registered
[ 3.138896] NET: Registered protocol
family 10
[ 3.139201] lo: Disabled Privacy
Extensions
[ 3.139418] NET: Registered protocol
family 17
[ 3.139494] Bridge firewalling
registered
[ 3.139558] Bluetooth: L2CAP ver
2.13
[ 3.139611] Bluetooth: L2CAP socket
layer initialized
[ 3.139667] Bluetooth: SCO (Voice
Link) ver 0.6
[ 3.139721] Bluetooth: SCO socket
layer initialized
[ 3.139789] Bluetooth: RFCOMM socket
layer initialized
[ 3.139847] Bluetooth: RFCOMM TTY
layer initialized
[ 3.139903] Bluetooth: RFCOMM ver
1.11
[ 3.140006] registered taskstats
version 1
[ 3.140148] PCI IO multiplexer
device installed.
[ 3.140211] Magic
number: 13:836:735
[ 3.140313] rtc_cmos 00:05: setting
system clock to 2009-10-10 13:42:39 UTC (1255182159)
[ 3.140389] BIOS EDD facility v0.16
2004-Jun-25, 1 devices found
[ 3.451160] ata3: SATA link down
(SStatus 4 SControl 300)
[ 3.710007] usb 3-2: new low speed
USB device using uhci_hcd and address 2
[ 3.790157] ata1.00: SATA link up
3.0 Gbps (SStatus 123 SControl 300)
[ 3.790244] ata1.01: SATA link down
(SStatus 4 SControl 300)
[ 3.811151] ata1.00: ATA-8: WDC
WD2500AAJS-75M0A0, 01.03E01, max UDMA/133
[ 3.811229] ata1.00: 488281250
sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.831182] ata1.00: configured for
UDMA/133
[ 3.831375] scsi 0:0:0:0:
Direct-Access ATA WDC
WD2500AAJS-7 01.0 PQ: 0 ANSI: 5
[ 3.831499] sd 0:0:0:0: Attached
scsi generic sg0 type 0
[ 3.831585] sd 0:0:0:0: [sda]
488281250 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.831664] sd 0:0:0:0: [sda] Write
Protect is off
[ 3.831733] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.831863] sda: sda1 sda2
< sda5 sda6<6>usb 3-2: configuration #1 chosen from 1 choice
[ 3.883831] sda7 sda8 >
[ 3.900246] sd 0:0:0:0: [sda]
Attached SCSI disk
[ 4.160010] usb 4-1: new low speed
USB device using uhci_hcd and address 2
[ 4.340045] usb 4-1: configuration
#1 chosen from 1 choice
[ 4.690089] ata2.00: SATA link up
1.5 Gbps (SStatus 113 SControl 300)
[ 4.690182] ata2.01: SATA link down
(SStatus 4 SControl 300)
[ 4.710219] ata2.00: ATAPI: PLDS
DVD+/-RW DH-16A6S, YD12, max UDMA/100
[ 4.750232] ata2.00: configured for
UDMA/100
[ 4.753351] scsi 1:0:0:0:
CD-ROM
PLDS DVD+-RW DH-16A6S YD12 PQ: 0 ANSI: 5
[ 4.759615] sr0: scsi3-mmc drive:
48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.759705] Uniform CD-ROM driver
Revision: 3.20
[ 4.759848] sr 1:0:0:0: Attached
scsi generic sg1 type 5
[ 5.100054] ata4: SATA link down
(SStatus 4 SControl 300)
[ 5.100246] Freeing unused kernel
memory: 356k freed
[ 5.100413] Write protecting the
kernel read-only data: 6844k
[ 5.264178] e1000e: Intel(R)
PRO/1000 Network Driver - 0.3.3.4-k4
[ 5.264249] e1000e: Copyright (c)
1999-2008 Intel Corporation.
(XEN) PCI add device 00:19.0
[ 5.264382] e1000e 0000:00:19.0: PCI
INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.300624] usbcore: registered new
interface driver hiddev
[ 5.314644] input: USB Optical Mouse
as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
[ 5.314797] generic-usb
0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on
usb-0000:00:1a.0-2/input0
[ 5.329490] input: Dell Dell
QuietKey Keyboard as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[ 5.329635] generic-usb
0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey
Keyboard] on usb-0000:00:1a.1-1/input0
[ 5.329743] usbcore: registered new
interface driver usbhid
[ 5.329800] usbhid: v2.6:USB HID
core driver
[ 5.382609] 0000:00:19.0: eth0: (PCI
Express:2.5GB/s:Width x1) 00:22:19:34:48:18
[ 5.382704] 0000:00:19.0: eth0:
Intel(R) PRO/1000 Network Connection
[ 5.382828] 0000:00:19.0: eth0: MAC:
8, PHY: 8, PBA No: 2021ff-0ff
[ 6.108564] kjournald
starting. Commit interval 5 seconds
[ 6.108571] EXT3-fs: mounted
filesystem with writeback data mode.
[ 9.776151] udev: starting version
141
[ 11.242941] Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled
[ 11.870370] ADDRCONF(NETDEV_UP): eth0:
link is not ready
[ 11.918561] parport_pc 00:06: reported by
Plug and Play ACPI
[ 11.918684] parport0: PC-style at 0x378
(0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 12.058030] dcdbas dcdbas: Dell Systems
Management Base Driver (version 5.6.0-3.2)
[ 12.194739] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 12.223050] iTCO_vendor_support:
vendor-support=0
[ 12.234209] iTCO_wdt: Intel TCO WatchDog
Timer Driver v1.05
[ 12.234328] iTCO_wdt: failed to reset
NO_REBOOT flag, reboot disabled by hardware
[ 12.234429] iTCO_wdt: No card detected
(XEN) PCI add device 00:00.0
[ 12.251581] agpgart-intel 0000:00:00.0:
Intel Q45/Q43 Chipset
[ 12.253079] agpgart-intel 0000:00:00.0:
detected 32764K stolen memory
[ 12.255661] agpgart-intel 0000:00:00.0:
AGP aperture is 256M @ 0xd0000000
[ 12.265331] ppdev: user-space parallel
port driver
(XEN) PCI add device 00:1b.0
[ 12.623704] HDA Intel 0000:00:1b.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.099018] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 13.221329] lp0: using parport0
(interrupt-driven).
The machine hangs here.
My Optiplex 960 box:
Ubuntu 9.04 Server
E8600
2G DDR 800 RAM
