|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] when i install the xen domain-U use full virtual mode, i get an error,but when i add option -p it's ok,why?
hi,all i also checked ,my cpu is support the full virtual mode ,when i add -p option ,it's ok.i do not know why? virt-install -n SN244_Test_Test44 -r 8192 --vcpus=16 -f /dev/vg01/44root -f /dev/vg01/44swap -f /dev/vg01/44var -f /dev/vg01/44data -m 00:16:3e:61:63:63 -b xenbr0 --nographics --accelerate --os-type=linux -l http://172.16.2.45/64/5.3 -x "ks=http://172.16.1.111/myinstall/new/newd1.ks.cfg" Would you like a fully virtualized guest (yes or no)? This will allow you to run unmodified operating systems. yes Starting install... Retrieving file .treeinfo... | 417 B 00:00 Retrieving file .treeinfo... | 417 B 00:00 Retrieving file .treeinfo... | 417 B 00:00 Retrieving file .treeinfo... | 417 B 00:00 Retrieving file .treeinfo... | 417 B 00:00 Retrieving file .treeinfo... | 417 B 00:00 Retrieving file boot.iso... | 8.7 MB 00:00 virDomainCreateLinux() failed POST operation failed: (xend.err 'Error creating domain: Unable to find number for device (None)') Domain installation may not have been successful. If it was, you can restart your domain by running 'virsh start SN244_Test_Test44'; otherwise, please restart your installation. Wed, 14 Oct 2009 07:54:25 ERROR virDomainCreateLinux() failed POST operation failed: (xend.err 'Error creating domain: Unable to find number for device (None)') Traceback (most recent call last): File "/usr/sbin/virt-install", line 560, in ? main() File "/usr/sbin/virt-install", line 492, in main dom = guest.start_install(conscb, progresscb, wait=(not wait)) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 822, in start_install return self._do_install(consolecb, meter, wait) File "/usr/lib/python2.4/site-packages/virtinst/Guest.py", line 843, in _do_install self.domain = self.conn.createLinux(install_xml, 0) File "/usr/lib64/python2.4/site-packages/libvirt.py", line 573, in createLinux if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self) libvirtError: virDomainCreateLinux() failed POST operation failed: (xend.err 'Error creating domain: Unable to find number for device (None)') the following info produced by para-vitual install Bootdata ok (command line is ks=http://172.16.1.111/myinstall/new/newd1.ks.cfg method=http://172.16.2.45/64/5.3) Linux version 2.6.18-128.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 11:12:42 EST 2009 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000200800000 (usable) No mptable found. Built 1 zonelists. Total pages: 2099200 Kernel command line: ks=http://172.16.1.111/myinstall/new/newd1.ks.cfg method=http://172.16.2.45/64/5.3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2261.000 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Software IO TLB disabled Memory: 8201332k/8396800k available (2447k kernel code, 186632k reserved, 1366k data, 180k init) Calibrating delay using timer specific routine.. 5654.29 BogoMIPS (lpj=11308594) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10A17A0 could not acquire Mutex [2] [20060707] No dock devices found. ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10A17A0 could not acquire Mutex [2] [20060707] Initializing CPU#1 migration_cost=52 migration_cost=Initializing CPU#2 52 Initializing CPU#3 migration_cost=52 migration_cost=Initializing CPU#4 52 Initializing CPU#5 migration_cost=52 Initializing CPU#6 migration_cost=52 Initializing CPU#7 migration_cost=52 Initializing CPU#8 migration_cost=52 Initializing CPU#9 migration_cost=52 Initializing CPU#10 migration_cost=52 Initializing CPU#11 migration_cost=52 Initializing CPU#12 migration_cost=52 Initializing CPU#13 migration_cost=52 Initializing CPU#14 migration_cost=52 Initializing CPU#15 migration_cost=52 Brought up 16 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1255478305.226:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 75ED35FE9471DC0E - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Bootdata ok (command line is ks=http://172.16.1.111/myinstall/new/newd1.ks.cfg method=http://172.16.2.45/64/5.3) Linux version 2.6.18-128.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 11:12:42 EST 2009 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000200800000 (usable) No mptable found. Built 1 zonelists. Total pages: 2099200 Kernel command line: ks=http://172.16.1.111/myinstall/new/newd1.ks.cfg method=http://172.16.2.45/64/5.3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2261.000 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Software IO TLB disabled Memory: 8201332k/8396800k available (2447k kernel code, 186632k reserved, 1366k data, 180k init) Calibrating delay using timer specific routine.. 5654.29 BogoMIPS (lpj=11308594) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10A17A0 could not acquire Mutex [2] [20060707] No dock devices found. ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10A17A0 could not acquire Mutex [2] [20060707] Initializing CPU#1 migration_cost=52 migration_cost=Initializing CPU#2 52 Initializing CPU#3 migration_cost=52 migration_cost=Initializing CPU#4 52 Initializing CPU#5 migration_cost=52 Initializing CPU#6 migration_cost=52 Initializing CPU#7 migration_cost=52 Initializing CPU#8 migration_cost=52 Initializing CPU#9 migration_cost=52 Initializing CPU#10 migration_cost=52 Initializing CPU#11 migration_cost=52 Initializing CPU#12 migration_cost=52 Initializing CPU#13 migration_cost=52 Initializing CPU#14 migration_cost=52 Initializing CPU#15 migration_cost=52 Brought up 16 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1255478305.226:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 75ED35FE9471DC0E - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Welcome to CentOS and ,here is the log output,i think the reason is xen can not find the /dev/None,but i do not understand when i use -p option,it's ok? ('vbd', ['vbd', ['dev', 'None:disk'], ['uname', 'phy:/dev/vg01/44data'] [2009-10-14 07:54:23 xend 3468] DEBUG (blkif:27) exception looking up device number for None: [Errno 2] No such file or directory: '/dev/None' Traceback (most recent call last): File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 205, in create vm.initDomain() File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1541, in initDomain self.createDevices() File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1750, in createDevices self.createDevice(n, c) File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1202, in createDevice return self.getDeviceController(deviceClass).createDevice(devconfig) File "/usr/lib64/python2.4/site-packages/xen/xend/server/DevController.py", line 80, in createDevice (devid, back, front) = self.getDeviceDetails(config) File "/usr/lib64/python2.4/site-packages/xen/xend/server/blkif.py", line 90, in getDeviceDetails raise VmError('Unable to find number for device (%s)' % (dev)) VmError: Unable to find number for device (None) _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |