[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] SuperMicro IPMI + Nehalem CPU


  • To: "Peter Braun" <xenware@xxxxxxxxx>, "Xen List" <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Robert Dunkley" <Robert@xxxxxxxxx>
  • Date: Wed, 21 Oct 2009 08:34:28 +0100
  • Cc:
  • Delivery-date: Wed, 21 Oct 2009 00:35:30 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AcpSIHLZBCHUKzOwQgWbk+FxIpQWzgAADWNw
  • Thread-topic: [Xen-users] SuperMicro IPMI + Nehalem CPU

Hi Peter,


I would check that the Baud rate in your Bios, IPMI Firmware (May be
applicable if you are using Ipmiutil or IPMITool) and grub.conf all
match. I have seen this sort of issue in cases where they don't.

I'm afraid I have no idea about the Unixbench prob.


Rob

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Peter Braun
Sent: 21 October 2009 08:29
To: Xen List
Subject: [Xen-users] SuperMicro IPMI + Nehalem CPU

Hi,

I just installed Debian 5.0 64bit + Xen 3.4.1 from sources + 2.6.31
aka Susexenified kernel on
new SuperMicro server with single Nehalem Xeon E5520.


2.6.31 kernel is working w/o problem, even onboard Intel gigabit NICs
are ok with igb driver compiled in.


Problems:

1) when booted to xen kernel I can't access console over IPMI "remote
control".
    I can see console but cannot type anything
    I tried console=vga, console=tty0, console=hvc, console=xvc in
dom0 grub config but nothing works


2) unixbench
    When I run unixbench tool on pure debian kernel 2.6.26 the final
score on single CPU E5520 is around 830 points
    When I run same tool on xen dom0 with 2.6.31 kernel than the score
is aroun 370 points only
    I was suspecting hypethreading but disabling it in bios doesnt
make big difference.

Any help greatly appreciated.


Br

Peter Braun

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

The SAQ Group

Registered Office: 18 Chapel Street, Petersfield, Hampshire GU32 3DZ
SAQ is the trading name of SEMTEC Limited. Registered in England & Wales
Company Number: 06481952

http://www.saqnet.co.uk AS29219

SAQ Group Delivers high quality, honestly priced communication and I.T. 
services to UK Business.

Broadband : Domains : Email : Hosting : CoLo : Servers : Racks : Transit : 
Backups : Managed Networks : Remote Support.

ISPA Member


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.