|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-devel] Re: Fire-wire passthrough with Linux pv-ops (2.6.31.1)
Hi En Ming,
I found the line "register_real_device: Error: Binding of interrupt failed!
rc=-1". So I guess the Fire-wire device doesn't
support MSI, and shares IRQ with other devices. This is the issue I and Jeremy
are discussing. You can search mail subject "pv-ops: fix shared irq device
passthrough" in mailing list for more details. Pls apply the attached patch
to pv-ops dom0 see if it fixes your problem.
Regards,
Weidong From: Mr. Teo En Ming (Zhang Enming) [mailto:space.time.universe@xxxxxxxxx] Sent: 2009年11月1日 22:08 To: Konrad Rzeszutek Wilk Cc: Jeremy Fitzhardinge; xen-devel@xxxxxxxxxxxxxxxxxxx; Han, Weidong; space.time.universe@xxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx Subject: Re: [Xen-devel] Re: Fire-wire passthrough with Linux pv-ops (2.6.31.1) I have just installed Slackware64 13.0 64-bit Linux as HVM domU. Please refer to http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ for more details and screenshots. I have tried to passthrough the firewire controller on Intel DQ45CB motherboard to Slackware64 13.0 HVM domU but I can't load the kernel modules for it. Please have a look at the following output within Slackware64 13.0 HVM domU. 00:05.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70) (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device 1003 Flags: bus master, medium devsel, latency 128, IRQ 36 Memory at e3001000 (32-bit, non-prefetchable) [size=4K] Memory at e3002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci1394 Kernel modules: ohci1394 root@slackware64-13:~# lsmod | egrep "(ohci|1394)" root@slackware64-13:~# cd /lib/modules/2.6.29.6/kernel/drivers/ieee1394/ root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# ls dv1394.ko eth1394.ko ieee1394.ko ohci1394.ko pcilynx.ko raw1394.ko sbp2.ko video1394.ko root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# modinfo ohci1394.ko filename: ohci1394.ko license: GPL description: Driver for PCI OHCI IEEE-1394 controllers author: Sebastien Rougeaux <sebastien.rougeaux@xxxxxxxxxx> alias: pci:v*d*sv*sd*bc0Csc00i10* depends: ieee1394 vermagic: 2.6.29.6 SMP mod_unload parm: phys_dma:Enable physical DMA (default = 1). (int) root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# modinfo ieee1394.ko filename: ieee1394.ko license: GPL depends: vermagic: 2.6.29.6 SMP mod_unload parm: ignore_drivers:Disable automatic probing for drivers. (int) parm: fcp:Map FCP registers (default = 1, disable = 0). (int) parm: disable_nodemgr:Disable nodemgr functionality. (int) parm: disable_irm:Disable Isochronous Resource Manager functionality. (bool) root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# modprobe ieee1394 FATAL: Error inserting ieee1394 (/lib/modules/2.6.29.6/kernel/drivers/ieee1394/ieee1394.ko): Invalid argument root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# modprobe ohci1394 FATAL: Error inserting ohci1394 (/lib/modules/2.6.29.6/kernel/drivers/ieee1394/ohci1394.ko): Invalid argument root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# dmesg | grep -i firewire root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# dmesg | grep -i ieee ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# lsmod | grep ieee1394 root@slackware64-13:/lib/modules/2.6.29.6/kernel/drivers/ieee1394# dmesg | grep 1394 ohci1394 0000:00:05.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[36] MMIO=[e3001000-e30017ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: module is already loaded ohci1394: module is already loaded ieee1394: module is already loaded ohci1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ieee1394: module is already loaded ohci1394: module is already loaded Debug messages in Dom0: domid: 3 qemu: the number of cpus is 2 config qemu network with xen bridge for tap3.0 eth0 Watching /local/domain/0/device-model/3/logdirty/next-active Watching /local/domain/0/device-model/3/command qemu_map_cache_init nr_buckets = 10000 size 4194304 shared page at pfn feffd buffered io page at pfn feffb Guest uuid = 9a35fdea-fa74-6fec-e0f2-a852836d9a22 Time offset set 0 cirrus_vga_enabled populating video RAM at ff000000 mapping video RAM from ff000000 Register xen platform. Done register platform. xs_read(/vm/9a35fdea-fa74-6fec-e0f2-a852836d9a22/log-throttling): read error platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error xs_read(): vncpasswd get error. /vm/9a35fdea-fa74-6fec-e0f2-a852836d9a22/vncpasswd. medium change watch on `hdc' (index: 1): /media/hitachi/slackware64-13.0-install-dvd.iso I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0 dm-command: hot insert pass-through pci dev register_real_device: Assigning real physical device 02:01.0 ... pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x2:0x1.0x0 pt_register_regions: IO region registered (size=0x00001000 base_addr=0xd3801000) pt_register_regions: IO region registered (size=0x00000100 base_addr=0xd3800000) register_real_device: Error: Binding of interrupt failed! rc=-1 register_real_device: Real physical device 02:01.0 registered successfuly! IRQ type = INTx cirrus vga map change while on lfb mode pt_iomem_map: e_phys=e3001000 maddr=d3801000 type=0 len=4096 index=0 first_map=1 pt_iomem_map: e_phys=e3002000 maddr=d3800000 type=0 len=4096 index=1 first_map=1 mapping vram to e0000000 - e0400000 platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state. platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state. pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:05.0][Offset:30h][Length:4] The line immediately above looks very suspicious. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore My Primary Blog: http://teo-en-ming-aka-zhang-enming.blogspot.com My Secondary Blog: http://enmingteo.wordpress.com My Youtube videos: http://www.youtube.com/user/enmingteo Email: space.time.universe@xxxxxxxxx MSN: teoenming@xxxxxxxxxxx Mobile Phone (SingTel): +65-9648-9798 Mobile Phone (Starhub Prepaid): +65-8369-2618 Age: 31 (as at 30 Oct 2009) Height: 1.78 meters Race: Chinese Dialect: Hokkien Street: Bedok Reservoir Road Country: Singapore On Sat, Oct 24, 2009 at 2:19 AM, Mr. Teo En Ming (Zhang
Enming) <space.time.universe@xxxxxxxxx>
wrote: From the screenshots of the device manager in the Win XP Home domU, Attachment:
0001-pv-ops-fix-shared-irq-device-passthrough-v2.patch _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |