[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] windows vps can not start after a reboot


  • To: <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Dustin Henning" <Dustin.Henning@xxxxxxxxxxx>
  • Date: Mon, 23 Nov 2009 08:18:49 -0500
  • Delivery-date: Mon, 23 Nov 2009 05:19:38 -0800
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: Acprkm2ATYmAUHmeTLmS+mi2z8H8iQArFIuw

        I haven't seen any other messages in this thread, so forgive me if
this has been said already, but I believe NTLDR is the first file loaded
from the Windows partition.  If you have an HD with a boot sector and wipe
the Windows partition (or lose the Windows HDD that is separate), you will
get something to the effect of "NTLDR is missing."  That said, I suspect
that your error implies that something has messed up or corrupteh your
Windows partition.  If you were using GPLPV drivers and something went
wrong, they could be the culprit.  That isn't to say you shouldn't use the
drivers, just that you should always have a good backup, as is often stated
regarding said drivers (and best practices in general).
        Dustin

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of jim burns
Sent: Sunday, November 22, 2009 11:39
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] windows vps can not start after a reboot

> Windows could not start because the following file is missing or corrupt:
> <Windows root>\system32\hal.dll
> Please re-install a copy of the above file.

That's probably the first dll that windows tries to find on bootup, and 
basically means it couldn't even find the correct windows partition.
Assuming 
this is not a new install of the gplpv drivers, and that you have previously
booted correctly with them on, there is another possibility.

When it happened to me, it was because my boot.ini file got altered. Instead

of something like 'multi(0)disk(0)rdisk(0)partition(1)' in the various
lines, 
it had the wrong partition number. Double check it. With the vps shutdown,
try 
mounting the partition (losetup + kpartx + mount for a file: backed vbd, or 
simply kpartx + mount for a phy: device, like an lvm partition), and correct

it if necessary.

Good luck.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.