[Xen-users] Problem creating vm with two nics

[Martin Aceto <martin.aceto@xxxxxxxxx>]

Hello list, 

I 'm new on the mailing list. I've been using Xen for several years,
but always with basic configurations and it worked for me, also i have
several Debian/Xen servers working on production stages and they work
really fine.
But now i have  some big trouble that i cannot solve, i'll give you some info to see if someone can give me a hand:

Server: Sun x86
OS: Debian Lenny
Xen Hypervisor: 3.4.22

I need to configure two Nics eth0 and eth1

eth0 is a public network(Internet) 
eth1 is a private network (local)

Right now i have the following configuration:

/etc/network/interfases

### Static Mode ###############
# The primary network interface

#allow-hotplug eth0
auto eth0
iface eth0 inet static
        address 10.10.10.145
        netmask 255.255.255.240
        network 10.10.10.144
        broadcast 10.10.10.159
        gateway 10.10.10.158

#allow-hotplug eth1
auto eth1
iface eth1 inet static
        address 192.168.10.10
        netmask 255.255.255.0
        network 192.168.10.0
        broadcast 192.168.10.255
        #gateway 192.168.10.1

/etc/xen/xend-config.sxp

(network-script network-bridge-wrapper)
(vif-script vif-bridge)

/etc/xen/scripts/network-

bridge-wrapper

#!/bin/sh
dir=$(dirname "$0")
"$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0
"$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1


ifconfig

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

peth0     Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b8 
          inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6292 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6414 errors:8 dropped:0 overruns:0 carrier:8
          collisions:19 txqueuelen:100
          RX bytes:580331 (566.7 KiB)  TX bytes:3437154 (3.2 MiB)
          Memory:fbee0000-fbf00000

peth1     Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b9 
          inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:202 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:12120 (11.8 KiB)  TX bytes:846 (846.0 B)
          Memory:fbe60000-fbe80000

xenbr0    Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b8 
          inet addr:10.10.10.145  Bcast:0.0.0.0  Mask:255.255.255.240
          inet6 addr: fe80::214:4fff:feca:47b8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6084 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6401 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:482561 (471.2 KiB)  TX bytes:3436112 (3.2 MiB)

xenbr1    Link encap:Ethernet  HWaddr 00:14:4f:ca:47:b9 
          inet addr:192.168.10.10  Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe80::214:4fff:feca:47b9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:468 (468.0 B)


And when i want to run a virtual machine, it halts when it's booting

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver

and it doesn't continue! Has anyone have any idea of what am I doing wrong?

Thank you!

--
Martin Aceto

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users