Re: [Xen-users] How to gain host access in XCP

[ZHU Yuncheng <xmhaoyu@xxxxxxxxx>]

Thank you very much for your help! All I want to do is to access
virtual machine's console without manually building SSH tunnel.

On Wed, Apr 14, 2010 at 1:37 PM, Vern Burke <vburke@xxxxxxxx> wrote:
> XVP doesn't run on the XCP host, run it either on a dedicated host or in a 
> virtual machine web server. So far I havn't had a lot of luck getting XVP to 
> work but I've been so tied up getting my front end package out and released 
> (www.xencloudcontrol.com) I havn't had time to get back to it.
>
> Why do you want to change the vncterm address? As far as I know, this is the 
> correct setup to work with the DomU consoles.
>
> Vern
>
> Sent from my BlackBerry® wireless device from U.S. Cellular
>
> -----Original Message-----
> From: ZHU Yuncheng <xmhaoyu@xxxxxxxxx>
> Date: Wed, 14 Apr 2010 13:12:48
> To: <vburke@xxxxxxxx>
> Subject: Re: [Xen-users] How to gain host access in XCP
>
> Thank you very much, Vern!
>
> When I begin to try other methods, I have bigger problems:
>
> XCP says it comes with VNC Console Proxy (which is a link pointing to
> xvpsource.org).
> I looked at XVP and found it has either source or x86_64 binary.
> However, XCP dom0 is i686 (although my server is 64bit capable),
>  and it's yum repo is broken so I cannot even get a make or gcc.
>
> XCP then said it comes with Standalone Front-End (and this time is a
> link to openxencenter.com).
> When I tried to expand a OpenXenCenter and run I found that it is not
> compatible to my local CentOS 5 workstation.
> (Due to the libgio-2.0 problem you can see when you simply google libgio)
>
> So what can I do for this? Is there any xe command let me change the
> annoying 127.0.0.1 to 0.0.0.0 or other addresses?
>
> Best regards,
> Imsei Shu
>
> On Wed, Apr 14, 2010 at 12:16 PM, Vern Burke <vburke@xxxxxxxx> wrote:
>> When you log in to the XCP console command line, you are in the Dom0. Keep 
>> in mind that XCP is not the same thing as standalone Xen and if you expect 
>> to make the same manual changes as standalone Xen, you're going to have 
>> problems.
>>
>> Learn to use the xapi via xe and forget making manual config modifications 
>> to XCP.
>>
>> Vern
>>
>> Sent from my BlackBerry® wireless device from U.S. Cellular
>>
>> -----Original Message-----
>> From: ZHU Yuncheng <xmhaoyu@xxxxxxxxx>
>> Date: Wed, 14 Apr 2010 11:56:57
>> To: <xen-users@xxxxxxxxxxxxxxxxxxx>
>> Subject: [Xen-users] How to gain host access in XCP
>>
>> Hello, all!
>>
>> I installed XCP and found that upon login to Dom0 I'm not actually
>> accessing the host (i.e. there is no /etc/xen/ and other things).
>>
>> I want to modify something (for example, vncterm at 127.0.0.1 not
>> 0.0.0.0 is really annoying). How could I gain access to host and
>> modify the configurations?
>>
>> Best regards,
>> Imsei Shu
>>
>>_______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>>
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users