[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Multiple NIC interfaces on different subnets



So, since I am using libvirt with Xen 3.4.2, when I do a "virsh edit domu" I 
will replace the line

<source bridge='eth0'/>

with

<source bridge='bridgename'/>

Correct? I am about ready to pull the trigger on this and get going. Thanks for 
all the help thus far.
 
 
-- 
 
Donny B. 
 
On Monday, April 12, 2010 04:58 PM CDT, Simon Hobson <linux@xxxxxxxxxxxxxxxx> 
wrote: 
 
> Donny Brooks wrote:
> >We have multiple /24 networks here and I need to be able to have 
> >machines on at least 2 or 3 of the ranges. The server has 4 NIC 
> >ports I can use if needed. What would be the best way to get these 
> >/24's accessible on this machine?
> 
> On mine I have network-script set to my-network-script, and 
> my-network-script contains :
> 
> #!/bin/sh
> dir=$(dirname "$0")
> "$dir/network-bridge" "$@" vifnum=0 netdev=ethbak bridge=ethbak
> "$dir/network-bridge" "$@" vifnum=1 netdev=ethext bridge=ethext
> "$dir/network-bridge" "$@" vifnum=1 netdev=ethint bridge=ethint
> 
> I can then attach any guest to any combination of bridges are required.
>   Dom0 currently has an interface defined on each network, but I 
> believe you can get round that with "if up" to make an interface 
> active but without an IP.
> 
> This is on a Debian system.
> 
> -- 
> Simon Hobson
> 
> Visit http://www.magpiesnestpublishing.co.uk/ for books by acclaimed
> author Gladys Hobson. Novels - poetry - short stories - ideal as
> Christmas stocking fillers. Some available as e-books.
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
 
 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.