Re: [Xen-users] Gentoo on HP DL380 G6

[Niels Dettenbach <nd@xxxxxxxxxxxx>]

On Thursday 22 April 2010 19:51:07 Olaf Krause wrote:
> i'am trying to build a Gentoo Dom0-kernel booting a HP DL380 G6.
> 
> Has anyone twiddled a working kernel configuration for this hardware?

Im still working on my configuration on a G5 (DL 360 - 2x Intel XEON 5440 QC - 
64bit / amd64 Gentoo - which should be very similiar in the driver 
requirements) but it still worked for me over several days under load:
http://ftp.syndicat.com/pub/xen/tmp/config-2.6.31-xen-r11newsys

This is a 2.6.31-xen-r11 one - in the current im migrating to 2.6.32 for 
further productional use.

I'm able to boot XEN, use the KVM (USB HID) and to start several DomUs with 
that (without HVM - don't need it).

There might be still suboptimal settings for some reasons (i.e. udev 
compatibility etc.). If you are interested i will held you updated with 
further changes within this config.

If you find some improvements on your side it would be nice to hear from you.


...good luck.
best regards,


Niels.
-- 

---

  Niels Dettenbach
  ---
  Syndicat IT&Internet
  http://www.syndicat.com
  T.-Muentzer.-Str. 2, 37308 Heilbad Heiligenstadt - DE
  ---
  Kryptoinfo: 
  PGP public key ID 651CA20D
  Fingerprint: 55E0 4DCD B04C 4A49 1586  88AE 54DC 4465 651C A20D
  https://syndicat.com/pub_key.asc
  ---

Attachment: signature.asc
Description: This is a digitally signed message part.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users