[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: [Xen-users] RE: Xen4 / Intel DX58SO Mobo / VT-d not working
It is a multifunction device, a pci-e usb controller, so I assumed all them had to be passed through. I just changed it to only 02:00.0 and same thing test-box2:~# cat /etc/xen/vm-five.cfg | grep pci pci = ['02:00.0'] test-box2:~# xm create /etc/xen/vm-five.cfg Using config file "/etc/xen/vm-five.cfg". Error: Failed to assign device to IOMMU (0000:02:00.0@100,msitranslate=1,power_mgmt=0) On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote: > On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote: >> Pasi, >> >> Tried latest stable/2.6.32.x per your advice, no change. Anyone on >> xen-devel that can help me troubleshoot further? Everything looks >> right, can't figure out why vt-d is not working but it must be some >> kind of bug :( >> > > Did you try the suggestion said earlier.. try to just passthru the first pci > device? > > -- Pasi > >> test-box2:~# uname -a >> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010 x86_64 >> GNU/Linux >> >> test-box2:~# xm info | grep virt_caps >> virt_caps : hvm hvm_directio >> >> test-box2:~# xm pci-list-assignable-devices >> 0000:02:00.0 >> 0000:02:00.1 >> 0000:02:00.2 >> >> test-box2:~# xm create /etc/xen/vm-five.cfg >> Using config file "/etc/xen/vm-five.cfg". >> Error: Failed to assign device to IOMMU >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0) >> >> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#' >> kernel = '/usr/lib/xen/boot/hvmloader' >> builder = 'hvm' >> memory = '1792' >> device_model='/usr/lib/xen/bin/qemu-dm' >> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w', >> 'phy:/dev/sr0,ioemu:hdc:cdrom,r' >> ] >> name = 'vm-five' >> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42'] >> boot='dc' >> cpus='0-1' >> vcpus=2 >> acpi=1 >> ahci=1 >> vnc=1 >> sdl=0 >> timer_mode=1 >> usb=1 >> usbdevice='tablet' >> localtime=1 >> pci = ['02:00.0','02:00.1','02:00.2'] >> >> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote: >> > Forwarding to xen-devel. Can't seem to get VT-d working with xen4 from >> > tarball on xen.org 2.6.31.13 pv_ops dom0. On pasi's advice I tried >> > switching to stable/2.6.32.x branch for dom0 and that doesnt even >> > build. Did something change recently thats breaking compilation? >> > >> > Attached is xen dmesg with iommu=verbose loglvl=all guest_loglvl=all, >> > and dom0 dmesg from 2.6.31.x >> > >> > Any ideas on why VT-d is not working on this board? Initialization >> > looks good, xen reports hvm_directio capability, everything says VT-d >> > should work until domain is created. >> > >> > Any ideas why stable/2.6.32.x wont build? >> > >> > - chris >> > >> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote: >> >> I redid it with oldconfig which I didn't think would help and same >> >> thing. I guess this tree is broken? Can someone else try and see if >> >> they can build it? Ugh, whata day :) >> >> >> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote: >> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote: >> >>>> I used the default config on the wiki which you created. Steps I took >> >>>> were: >> >>>> >> >>>> # make clean distclean >> >>>> # wget -O .config >> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64" >> >>> >> >>> You should do "make oldconfig" at this point. >> >>> >> >>>> # make -j8 bzImage >> >>>> (blah blah) >> >>>> LD vmlinux.o >> >>>> MODPOST vmlinux.o >> >>>> WARNING: modpost: Found 7 section mismatch(es). >> >>>> To see full details build your kernel with: >> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y' >> >>>> GEN .version >> >>>> CHK include/linux/compile.h >> >>>> UPD include/linux/compile.h >> >>>> CC init/version.o >> >>>> LD init/built-in.o >> >>>> LD .tmp_vmlinux1 >> >>>> drivers/built-in.o: In function `do_hvm_suspend': >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined reference >> >>>> to `xenbus_suspend' >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined reference >> >>>> to `xenbus_resume' >> >>>> make: *** [.tmp_vmlinux1] Error 1 >> >>>> >> >>> >> >>> Hmm.. weird. I wonder if something has changed recently or what's going >> >>> on in here.. >> >>> >> >>> -- Pasi >> >>> >> >>>> >> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen <pasik@xxxxxx> wrote: >> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote: >> >>>> >> Successfully grabbed the sources and failed to build: >> >>>> >> >> >>>> >> LD .tmp_vmlinux1 >> >>>> >> drivers/built-in.o: In function `do_hvm_suspend': >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined reference >> >>>> >> to `xenbus_suspend' >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined reference >> >>>> >> to `xenbus_resume' >> >>>> >> make: *** [.tmp_vmlinux1] Error 1 >> >>>> >> >> >>>> >> :( >> >>>> >> >> >>>> > >> >>>> > Try the example .config files provided on the wiki page. >> >>>> > >> >>>> > -- Pasi >> >>>> > >> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen <pasik@xxxxxx> >> >>>> >> wrote: >> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote: >> >>>> >> >> Pasi, >> >>>> >> >> >> >>>> >> >> How do I pull those kernel sources you referenced? I see it >> >>>> >> >> mentioned >> >>>> >> >> on http://wiki.xensource.com/xenwiki/XenParavirtOps but no >> >>>> >> >> details on >> >>>> >> >> how to retrieve it. >> >>>> >> >> >> >>>> >> > >> >>>> >> > The instructions are there if you read it carefully.. >> >>>> >> > There's the topic of how to switch branches. >> >>>> >> > >> >>>> >> > -- Pasi >> >>>> >> > >> >>>> >> >> - chris >> >>>> >> >> >> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen <pasik@xxxxxx> >> >>>> >> >> wrote: >> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote: >> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set >> >>>> >> >> >> iommu=verbose. >> >>>> >> >> >> Here is that output, I don't know if it helps at all to figure >> >>>> >> >> >> out >> >>>> >> >> >> what is wrong. >> >>>> >> >> >> >> >>>> >> >> > >> >>>> >> >> > That seems to be OK: >> >>>> >> >> > >> >>>> >> >> > (XEN) I/O virtualisation enabled >> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled >> >>>> >> >> > >> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff? >> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch instead and >> >>>> >> >> > see if that makes a difference.. >> >>>> >> >> > >> >>>> >> >> > -- Pasi >> >>>> >> >> > >> >>>> >> >> >> >> >>>> >> >> >> ---------- Forwarded message ---------- >> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx> >> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM >> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not working >> >>>> >> >> >> To: Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx> >> >>>> >> >> >> >> >>>> >> >> >> >> >>>> >> >> >> Hello, >> >>>> >> >> >> >> >>>> >> >> >> I've previously been successful with Xen4 and VT-d on other >> >>>> >> >> >> systems. I >> >>>> >> >> >> am having trouble getting VT-d passthrough working to a WinXP >> >>>> >> >> >> domain >> >>>> >> >> >> with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is enabled >> >>>> >> >> >> in bios, >> >>>> >> >> >> xm info shows hvm_directio capability, I have iommu=1 set, I >> >>>> >> >> >> have the >> >>>> >> >> >> devices bound to pciback on dom0 cmdline, xm >> >>>> >> >> >> pci-list-assignable-devices shows the devices as assignable. >> >>>> >> >> >> When I >> >>>> >> >> >> attempt to start the VM I get the error: >> >>>> >> >> >> >> >>>> >> >> >> Error: Failed to assign device to IOMMU >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0) >> >>>> >> >> >> >> >>>> >> >> >> Below is all the information I can think of that would be >> >>>> >> >> >> useful to >> >>>> >> >> >> help debug it: >> >>>> >> >> >> >> >>>> >> >> >> BIOS VT-d Enabled: >> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg >> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg >> >>>> >> >> >> >> >>>> >> >> >> grub entry: >> >>>> >> >> >> >> >>>> >> >> >> title Xen 4.0.0 / Debian GNU/Linux, kernel 2.6.31.13 >> >>>> >> >> >> root (hd0,0) >> >>>> >> >> >> kernel /boot/xen-4.0.0.gz iommu=1 dom0_mem=256M >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true >> >>>> >> >> >> module /boot/vmlinuz-2.6.31.13 root=/dev/md0 ro >> >>>> >> >> >> console=tty0 >> >>>> >> >> >> xen-pciback.permissive >> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.2)(09:00.0)(09:00.1)(09:00.2) >> >>>> >> >> >> module /boot/initrd.img-2.6.31.13 >> >>>> >> >> >> >> >>>> >> >> >> # xm pci-list-assignable-devices >> >>>> >> >> >> 0000:09:00.0 >> >>>> >> >> >> 0000:09:00.1 >> >>>> >> >> >> 0000:09:00.2 >> >>>> >> >> >> 0000:07:00.0 >> >>>> >> >> >> 0000:07:00.1 >> >>>> >> >> >> 0000:07:00.2 >> >>>> >> >> >> 0000:04:00.0 >> >>>> >> >> >> 0000:04:00.1 >> >>>> >> >> >> 0000:04:00.2 >> >>>> >> >> >> 0000:02:00.0 >> >>>> >> >> >> 0000:02:00.1 >> >>>> >> >> >> 0000:02:00.2 >> >>>> >> >> >> >> >>>> >> >> >> # xm info >> >>>> >> >> >> host : test-box2 >> >>>> >> >> >> release : 2.6.31.13 >> >>>> >> >> >> version : #2 SMP Wed May 12 14:11:37 EDT 2010 >> >>>> >> >> >> machine : x86_64 >> >>>> >> >> >> nr_cpus : 8 >> >>>> >> >> >> nr_nodes : 1 >> >>>> >> >> >> cores_per_socket : 4 >> >>>> >> >> >> threads_per_core : 2 >> >>>> >> >> >> cpu_mhz : 2800 >> >>>> >> >> >> hw_caps : >> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000 >> >>>> >> >> >> virt_caps : hvm hvm_directio >> >>>> >> >> >> total_memory : 7950 >> >>>> >> >> >> free_memory : 7812 >> >>>> >> >> >> node_to_cpu : node0:0-7 >> >>>> >> >> >> node_to_memory : node0:7812 >> >>>> >> >> >> node_to_dma32_mem : node0:3249 >> >>>> >> >> >> max_node_id : 0 >> >>>> >> >> >> xen_major : 4 >> >>>> >> >> >> xen_minor : 0 >> >>>> >> >> >> xen_extra : .0 >> >>>> >> >> >> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p >> >>>> >> >> >> hvm-3.0-x86_32 >> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64 >> >>>> >> >> >> xen_scheduler : credit >> >>>> >> >> >> xen_pagesize : 4096 >> >>>> >> >> >> platform_params : virt_start=0xffff800000000000 >> >>>> >> >> >> xen_changeset : unavailable >> >>>> >> >> >> xen_commandline : iommu=1 dom0_mem=256M dom0_max_vcpus=1 >> >>>> >> >> >> dom0_vcpus_pin=true >> >>>> >> >> >> cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1) >> >>>> >> >> >> cc_compile_by : root >> >>>> >> >> >> cc_compile_domain : >> >>>> >> >> >> cc_compile_date : Thu May 6 13:41:25 EDT 2010 >> >>>> >> >> >> xend_config_format : 4 >> >>>> >> >> >> >> >>>> >> >> >> # xm create vm-five.cfg >> >>>> >> >> >> Using config file "./vm-five.cfg". >> >>>> >> >> >> Error: Failed to assign device to IOMMU >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0) >> >>>> >> >> >> >> >>>> >> >> >> I feel like I'm missing something really obvious but I've been >> >>>> >> >> >> at it >> >>>> >> >> >> for a while now and have run out of brain power. Anyone have >> >>>> >> >> >> any idea >> >>>> >> >> >> what might be wrong? >> >>>> >> >> >> >> >>>> >> >> >> - chris >> >>>> >> >> > >> >>>> >> >> >> __ __ _ _ ___ ___ >> >>>> >> >> >> \ \/ /___ _ __ | || | / _ \ / _ \ >> >>>> >> >> >> \ // _ \ \047_ \ | || |_| | | | | | | >> >>>> >> >> >> / \ __/ | | | |__ _| |_| | |_| | >> >>>> >> >> >> /_/\_\___|_| |_| |_|(_)___(_)___/ >> >>>> >> >> >> >> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version 4.3.2 (Debian >> >>>> >> >> >> 4.3.2-1.1) ) Thu May 6 13:41:25 EDT 2010 >> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable >> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true >> >>>> >> >> >> (XEN) Video information: >> >>>> >> >> >> (XEN) VGA is text mode 80x25, font 8x16 >> >>>> >> >> >> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds >> >>>> >> >> >> (XEN) EDID info not retrieved because no DDC retrieval method >> >>>> >> >> >> detected >> >>>> >> >> >> (XEN) Disc information: >> >>>> >> >> >> (XEN) Found 2 MBR signatures >> >>>> >> >> >> (XEN) Found 2 EDD information structures >> >>>> >> >> >> (XEN) Xen-e820 RAM map: >> >>>> >> >> >> (XEN) 0000000000000000 - 000000000008f000 (usable) >> >>>> >> >> >> (XEN) 000000000008f000 - 0000000000090000 (reserved) >> >>>> >> >> >> (XEN) 0000000000090000 - 000000000009ec00 (usable) >> >>>> >> >> >> (XEN) 000000000009ec00 - 00000000000a0000 (reserved) >> >>>> >> >> >> (XEN) 00000000000e0000 - 0000000000100000 (reserved) >> >>>> >> >> >> (XEN) 0000000000100000 - 00000000cf4bd000 (usable) >> >>>> >> >> >> (XEN) 00000000cf4bd000 - 00000000cf4bf000 (reserved) >> >>>> >> >> >> (XEN) 00000000cf4bf000 - 00000000cf4c2000 (usable) >> >>>> >> >> >> (XEN) 00000000cf4c2000 - 00000000cf7bf000 (ACPI NVS) >> >>>> >> >> >> (XEN) 00000000cf7bf000 - 00000000cf7df000 (usable) >> >>>> >> >> >> (XEN) 00000000cf7df000 - 00000000cf7ff000 (ACPI data) >> >>>> >> >> >> (XEN) 00000000cf7ff000 - 00000000cf800000 (usable) >> >>>> >> >> >> (XEN) 00000000cf800000 - 00000000d0000000 (reserved) >> >>>> >> >> >> (XEN) 00000000f8000000 - 00000000fd000000 (reserved) >> >>>> >> >> >> (XEN) 00000000ffe00000 - 0000000100000000 (reserved) >> >>>> >> >> >> (XEN) 0000000100000000 - 0000000230000000 (usable) >> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL ) >> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL DX58SO 11F6 >> >>>> >> >> >> 1000013) >> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field >> >>>> >> >> >> "Pm2ControlBlock" has zero address or length: >> >>>> >> >> >> 0000000000000450/0 [20070126] >> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040 >> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL SSDT PM 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL DX58SO 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL PerfTune 11F6 >> >>>> >> >> >> MSFT 100000D) >> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB) >> >>>> >> >> >> (XEN) Domain heap initialised >> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21 >> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21 >> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, >> >>>> >> >> >> GSI 0-23 >> >>>> >> >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe711000 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1b.0 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe710000 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e9000 >> >>>> >> >> >> end_address e9fff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ea000 >> >>>> >> >> >> end_address eafff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr eb000 >> >>>> >> >> >> end_address ebfff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e6000 >> >>>> >> >> >> end_address e6fff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e7000 >> >>>> >> >> >> end_address e7fff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e8000 >> >>>> >> >> >> end_address e8fff >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR: >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0 >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000 >> >>>> >> >> >> end_address eefff >> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit) >> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor. >> >>>> >> >> >> (XEN) Initing memory sharing. >> >>>> >> >> >> (XEN) VMX: Supported advanced features: >> >>>> >> >> >> (XEN) - APIC MMIO access virtualisation >> >>>> >> >> >> (XEN) - APIC TPR shadow >> >>>> >> >> >> (XEN) - Extended Page Tables (EPT) >> >>>> >> >> >> (XEN) - Virtual-Processor Identifiers (VPID) >> >>>> >> >> >> (XEN) - Virtual NMI >> >>>> >> >> >> (XEN) - MSR direct-access bitmap >> >>>> >> >> >> (XEN) HVM: ASIDs enabled. >> >>>> >> >> >> (XEN) HVM: VMX enabled >> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected. >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe711000 iommu->reg >> >>>> >> >> >> = ffff82c3fff57000 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262 ecap = f0207a >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe710000 iommu->reg >> >>>> >> >> >> = ffff82c3fff56000 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = f020fa >> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported. >> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported. >> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported. >> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported. >> >>>> >> >> >> (XEN) I/O virtualisation enabled >> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled >> >>>> >> >> >> (XEN) Total of 8 processors activated. >> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs >> >>>> >> >> >> (XEN) -> Using new ACK method >> >>>> >> >> >> (XEN) TSC is reliable, synchronization unnecessary >> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET >> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB. >> >>>> >> >> >> (XEN) Brought up 8 CPUs >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:19.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.5 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = a:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.4 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.5 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.6 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.7 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.4 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.0 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.1 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.2 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.3 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg >> >>>> >> >> >> = ffff82c3fff57000 >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: iommu->reg >> >>>> >> >> >> = ffff82c3fff56000 >> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 *** >> >>>> >> >> >> (XEN) Xen kernel: 64-bit, lsb, compat32 >> >>>> >> >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> >> >>>> >> >> >> 0x26ae000 >> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> >>>> >> >> >> (XEN) Dom0 alloc.: 0000000210000000->0000000220000000 >> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> >>>> >> >> >> (XEN) Loaded kernel: ffffffff81000000->ffffffff826ae000 >> >>>> >> >> >> (XEN) Init. ramdisk: ffffffff826ae000->ffffffff8f4de600 >> >>>> >> >> >> (XEN) Phys-Mach map: ffffffff8f4df000->ffffffff8f55f000 >> >>>> >> >> >> (XEN) Start info: ffffffff8f55f000->ffffffff8f55f4b4 >> >>>> >> >> >> (XEN) Page tables: ffffffff8f560000->ffffffff8f5df000 >> >>>> >> >> >> (XEN) Boot stack: ffffffff8f5df000->ffffffff8f5e0000 >> >>>> >> >> >> (XEN) TOTAL: ffffffff80000000->ffffffff8f800000 >> >>>> >> >> >> (XEN) ENTRY ADDRESS: ffffffff81a10860 >> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs >> >>>> >> >> >> (XEN) Scrubbing Free RAM: >> >>>> >> >> >> ..............................................................................done. >> >>>> >> >> >> (XEN) Xen trace buffers: disabled >> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings >> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and >> >>>> >> >> >> warnings) >> >>>> >> >> >> (XEN) Xen is relinquishing VGA console. >> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three >> >>>> >> >> >> times to switch input to Xen) >> >>>> >> >> >> (XEN) Freed 164kB init memory. >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929 pirq=23 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0 >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18 >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for >> >>>> >> >> >> in-use IRQ! >> >>>> >> >> > >> >>>> >> >> >> _______________________________________________ >> >>>> >> >> >> Xen-users mailing list >> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx >> >>>> >> >> >> http://lists.xensource.com/xen-users >> >>>> >> >> > >> >>>> >> > >> >>>> > >> >>> >> >> >> > > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |