[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] MSI-X errors with 8G QLogic Fibre Channel HBA in Windows 2008 domU using Xen 4.0.0


  • To: Xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: Dante Cinco <dantecinco@xxxxxxxxx>
  • Date: Thu, 27 May 2010 11:37:14 -0700
  • Delivery-date: Thu, 27 May 2010 11:39:01 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=ViAsqknMQ6K1P60rjX2sxBWdQSEz4tuFVlls8+zn9LF2lSLuLUhcu8hQfg4Q8CnM+E ouXkPXa+8b16LwltBFAjWt1wYCv+8s9Z3cZvvWpj6Uf/4lUuaFvQcq3fPrbKAGq7NCoW E6fCF5sWUrFavIbPr9sk8kTIcFk68rRvflm2A=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I'm seeing MSI-X related errors (pt_msix_update_one: Error: Mapping msix entry 0) when I start a Windows 2008 domU. I'm using xen-pciback to hide a pair of 8G QLogic HBA devices from dom0 which I'm assigning to the Windows domU. Maybe the MSI-X table size of 32 is causing some problem. I've tried to include as much log information below.

Dante

Here's the result of lspci -vvv:
0d:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
        Subsystem: QLogic Corp. Device 015d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 5000 [size=256]
        Region 1: Memory at fbef0000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at fbd00000 (64-bit, non-prefetchable) [size=1M]
        Expansion ROM at e4100000 [disabled] [size=256K]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-
)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [4c] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <2us, L1 <2us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [88] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
                Address: 00000000fee00000  Data: 402e
        Capabilities: [98] Vital Product Data <?>
        Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=32
                Vector table: BAR=1 offset=00002000
                PBA: BAR=1 offset=00003000
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [138] Power Budgeting <?>
        Kernel driver in use: pciback
0d:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
        Subsystem: QLogic Corp. Device 015d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 37
        Region 0: I/O ports at 5400 [size=256]
        Region 1: Memory at fbcf0000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at fbb00000 (64-bit, non-prefetchable) [size=1M]
        Expansion ROM at e4140000 [disabled] [size=256K]
        Capabilities: [44] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [4c] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <2us, L1 <2us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [88] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
                Address: 00000000fee00000  Data: 4036
        Capabilities: [98] Vital Product Data <?>
        Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=32
                Vector table: BAR=1 offset=00002000
                PBA: BAR=1 offset=00003000
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [138] Power Budgeting <?>
        Kernel driver in use: pciback


xend.log:
[2010-05-25 03:00:54 3110] DEBUG (XendDomainInfo:822) XendDomainInfo.hvm_pci_device_insert_dev: 0000:0d:00.0@100,msitranslate=1,power_mgmt=0
[2010-05-25 03:00:54 3110] DEBUG (XendDomainInfo:826) pci: assign device 0000:0d:00.0@100,msitranslate=1,power_mgmt=0
[2010-05-25 03:00:54 3110] DEBUG (image:508) signalDeviceModel: orig_state is None, retrying
[2010-05-25 03:00:54 3110] DEBUG (image:508) signalDeviceModel: orig_state is None, retrying
[2010-05-25 03:00:54 3110] DEBUG (image:508) signalDeviceModel: orig_state is None, retrying
[2010-05-25 03:00:54 3110] DEBUG (image:508) signalDeviceModel: orig_state is None, retrying
[2010-05-25 03:00:55 3110] INFO (image:538) signalDeviceModel:restore dm state to running
[2010-05-25 03:00:55 3110] INFO (pciquirk:92) NO quirks found for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciquirk:135) Permissive mode NOT enabled for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciif:320) pci: enabling ioport 0x5000/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbef0000/0x4000 pfn 0xfbef0/0x4
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbd00000/0x100000 pfn 0xfbd00/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0x20100000/0x40000 pfn 0x20100/0x40
[2010-05-25 03:00:55 3110] DEBUG (pciif:351) pci: enabling irq 30
[2010-05-25 03:00:55 3110] INFO (pciquirk:92) NO quirks found for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciquirk:135) Permissive mode NOT enabled for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciif:320) pci: enabling ioport 0x5400/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbcf0000/0x4000 pfn 0xfbcf0/0x4
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbb00000/0x100000 pfn 0xfbb00/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0x20140000/0x40000 pfn 0x20140/0x40
[2010-05-25 03:00:55 3110] DEBUG (pciif:351) pci: enabling irq 37
[2010-05-25 03:00:55 3110] DEBUG (pciif:456) pci: register aer watch /local/domain/0/backend/pci/1/0/aerState
[2010-05-25 03:00:55 3110] DEBUG (pciif:169) Reconfiguring PCI device 0000:0d:00.0.
[2010-05-25 03:00:55 3110] INFO (pciquirk:92) NO quirks found for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciquirk:135) Permissive mode NOT enabled for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:55 3110] DEBUG (pciif:320) pci: enabling ioport 0x5000/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbef0000/0x4000 pfn 0xfbef0/0x4
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbd00000/0x100000 pfn 0xfbd00/0x100
[2010-05-25 03:00:55 3110] DEBUG (pciif:334) pci: enabling iomem 0x20100000/0x40000 pfn 0x20100/0x40
[2010-05-25 03:00:55 3110] DEBUG (pciif:351) pci: enabling irq 30
[2010-05-25 03:00:56 3110] DEBUG (XendDomainInfo:826) pci: assign device 0000:0d:00.1@100,msitranslate=1,power_mgmt=0
[2010-05-25 03:00:56 3110] INFO (image:538) signalDeviceModel:restore dm state to running
[2010-05-25 03:00:56 3110] DEBUG (pciif:169) Reconfiguring PCI device 0000:0d:00.1.
[2010-05-25 03:00:56 3110] INFO (pciquirk:92) NO quirks found for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:56 3110] DEBUG (pciquirk:135) Permissive mode NOT enabled for PCI device [1077:2532:1077:015d]
[2010-05-25 03:00:56 3110] DEBUG (pciif:320) pci: enabling ioport 0x5400/0x100
[2010-05-25 03:00:56 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbcf0000/0x4000 pfn 0xfbcf0/0x4
[2010-05-25 03:00:56 3110] DEBUG (pciif:334) pci: enabling iomem 0xfbb00000/0x100000 pfn 0xfbb00/0x100
[2010-05-25 03:00:56 3110] DEBUG (pciif:334) pci: enabling iomem 0x20140000/0x40000 pfn 0x20140/0x40
[2010-05-25 03:00:56 3110] DEBUG (pciif:351) pci: enabling irq 37


qemu-dm-win2008.log:
domid: 2
config qemu network with xen bridge for  tap2.0 eth0
Using xvda for guest's hda
Watching /local/domain/0/device-model/2/logdirty/cmd
Watching /local/domain/0/device-model/2/command
char device redirected to /dev/pts/2
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 3ed399c0-03b2-442f-2205-546e2c4b7126
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/2/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/3ed399c0-03b2-442f-2205-546e2c4b7126/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/2/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/2/log-throttling'
medium change watch on `/local/domain/2/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0d:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xd:0x0.0x0
pt_register_regions: IO region registered (size=0x00000100 base_addr=0x00005001)
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbef0004)
pt_register_regions: IO region registered (size=0x00100000 base_addr=0xfbd00004)
pt_register_regions: Expansion ROM registered (size=0x00040000 base_addr=0xe4100000)
pt_msix_init: get MSI-X table bar base fbef0000
pt_msix_init: table_off = 2000, total_entries = 32
pt_msix_init: errno = 2
pt_msix_init: mapping physical MSI-X table to 7fcf6feef000
pt_msi_setup: msi mapped with pirq 4f
pci_intx: intx=1
register_real_device: Real physical device 0d:00.0 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0d:00.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0xd:0x0.0x1
pt_register_regions: IO region registered (size=0x00000100 base_addr=0x00005401)
pt_register_regions: IO region registered (size=0x00004000 base_addr=0xfbcf0004)
pt_register_regions: IO region registered (size=0x00100000 base_addr=0xfbb00004)
pt_register_regions: Expansion ROM registered (size=0x00040000 base_addr=0xe4140000)
pt_msix_init: get MSI-X table bar base fbcf0000
pt_msix_init: table_off = 2000, total_entries = 32
pt_msix_init: errno = 2
pt_msix_init: mapping physical MSI-X table to 7fcf6feee000
pt_msi_setup: msi mapped with pirq 4e
pci_intx: intx=2
register_real_device: Real physical device 0d:00.1 registered successfuly!
IRQ type = MSI-INTx
cirrus vga map change while on lfb mode
pt_iomem_map: e_phys=f3000000 maddr=fbd00000 type=0 len=1048576 index=3 first_map=1
pt_iomem_map: e_phys=f3100000 maddr=fbb00000 type=0 len=1048576 index=3 first_map=1
pt_iomem_map: e_phys=f32a0000 maddr=fbef0000 type=0 len=16384 index=1 first_map=1
pt_iomem_map: e_phys=f32a4000 maddr=fbcf0000 type=0 len=16384 index=1 first_map=1
pt_ioport_map: e_phys=c100 pio_base=5000 len=256 index=0 first_map=1
pt_ioport_map: e_phys=c200 pio_base=5400 len=256 index=0 first_map=1
Overlapped to device[00:06.0][Region:6][Address:f3240000h][Size:00040000h]
pt_bar_mapping_one: Warning: ptdev[00:05.0][Region:6][Address:f3200001h][Size:00040000h] is overlapped.
pt_iomem_map: e_phys=f3200001 maddr=e4100000 type=8 len=262144 index=6 first_map=1
pt_iomem_map: e_phys=ffffffff maddr=e4100000 type=8 len=262144 index=6 first_map=0
Overlapped to device[00:04.0][Region:0][Address:f3280000h][Size:00020000h]
pt_bar_mapping_one: Warning: ptdev[00:06.0][Region:6][Address:f3240001h][Size:00040000h] is overlapped.
pt_iomem_map: e_phys=f3240001 maddr=e4140000 type=8 len=262144 index=6 first_map=1
pt_iomem_map: e_phys=ffffffff maddr=e4140000 type=8 len=262144 index=6 first_map=0
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
pt_ioport_map: e_phys=ffff pio_base=5000 len=256 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbef0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbd00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=5000 len=256 index=0 first_map=0
pt_iomem_map: e_phys=f32a0000 maddr=fbef0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=f3000000 maddr=fbd00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=5400 len=256 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbcf0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbb00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=c200 pio_base=5400 len=256 index=0 first_map=0
pt_iomem_map: e_phys=f32a4000 maddr=fbcf0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=f3100000 maddr=fbb00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=ffff pio_base=5000 len=256 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbef0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbd00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=c100 pio_base=5000 len=256 index=0 first_map=0
pt_iomem_map: e_phys=f32a0000 maddr=fbef0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=f3000000 maddr=fbd00000 type=0 len=1048576 index=3 first_map=0
pt_msixctrl_reg_write: guest enabling MSI-X, disable MSI-INTx translation
pci_intx: intx=1
pt_msix_update_one: Update msix entry 0 with pirq 4d gvec b0
pt_msix_update_one: Update msix entry 1 with pirq 4c gvec a0
pt_msix_update_one: Update msix entry 2 with pirq 4b gvec 90
pt_msix_update_one: Update msix entry 3 with pirq 4a gvec 80
pt_msix_update_one: Update msix entry 4 with pirq 49 gvec 70
pt_msix_update_one: Update msix entry 5 with pirq 48 gvec 60
pt_msix_update_one: Update msix entry 6 with pirq 47 gvec 82
pt_msix_update_one: Update msix entry 7 with pirq 46 gvec 72
pt_msix_update_one: Update msix entry 8 with pirq 45 gvec 62
pt_msix_update_one: Update msix entry 9 with pirq 44 gvec 52
pt_msix_update_one: Update msix entry a with pirq 43 gvec b3
pt_msix_update_one: Update msix entry b with pirq 42 gvec a3
pt_msix_update_one: Update msix entry c with pirq 41 gvec 93
pt_msix_update_one: Update msix entry d with pirq 40 gvec 83
pt_msix_update_one: Update msix entry e with pirq 3f gvec 73
pt_msix_update_one: Update msix entry f with pirq 3e gvec 63
pt_msix_update_one: Update msix entry 10 with pirq 3d gvec 53
pt_msix_update_one: Update msix entry 11 with pirq 3c gvec b4
pt_msix_update_one: Update msix entry 12 with pirq 3b gvec a4
pt_msix_update_one: Update msix entry 13 with pirq 3a gvec 94
pt_msix_update_one: Update msix entry 14 with pirq 39 gvec 84
pt_msix_update_one: Update msix entry 15 with pirq 38 gvec 74
pt_msix_update_one: Update msix entry 16 with pirq 37 gvec 64
pt_msix_update_one: Update msix entry 17 with pirq 36 gvec 54
pt_msix_update_one: Update msix entry 18 with pirq 35 gvec b5
pt_msix_update_one: Update msix entry 19 with pirq 34 gvec a5
pt_msix_update_one: Update msix entry 1a with pirq 33 gvec 95
pt_msix_update_one: Update msix entry 1b with pirq 32 gvec 85
pt_msix_update_one: Update msix entry 1c with pirq 31 gvec 75
pt_msix_update_one: Update msix entry 1d with pirq 30 gvec 65
pt_msix_update_one: Error: Mapping msix entry 1e
pt_msix_update_one: Error: Mapping msix entry 1f
pt_ioport_map: e_phys=ffff pio_base=5400 len=256 index=0 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbcf0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=ffffffff maddr=fbb00000 type=0 len=1048576 index=3 first_map=0
pt_ioport_map: e_phys=c200 pio_base=5400 len=256 index=0 first_map=0
pt_iomem_map: e_phys=f32a4000 maddr=fbcf0000 type=0 len=16384 index=1 first_map=0
pt_iomem_map: e_phys=f3100000 maddr=fbb00000 type=0 len=1048576 index=3 first_map=0
pt_msixctrl_reg_write: guest enabling MSI-X, disable MSI-INTx translation
pci_intx: intx=2
pt_msix_update_one: Error: Mapping msix entry 0
pt_msix_update_one: Error: Mapping msix entry 1
pt_msix_update_one: Error: Mapping msix entry 2
pt_msix_update_one: Error: Mapping msix entry 3
pt_msix_update_one: Error: Mapping msix entry 4
pt_msix_update_one: Error: Mapping msix entry 5
pt_msix_update_one: Error: Mapping msix entry 6
pt_msix_update_one: Error: Mapping msix entry 7
pt_msix_update_one: Error: Mapping msix entry 8
pt_msix_update_one: Error: Mapping msix entry 9
pt_msix_update_one: Error: Mapping msix entry a
pt_msix_update_one: Error: Mapping msix entry b
pt_msix_update_one: Error: Mapping msix entry c
pt_msix_update_one: Error: Mapping msix entry d
pt_msix_update_one: Error: Mapping msix entry e
pt_msix_update_one: Error: Mapping msix entry f
pt_msix_update_one: Error: Mapping msix entry 10
pt_msix_update_one: Error: Mapping msix entry 11
pt_msix_update_one: Error: Mapping msix entry 12
pt_msix_update_one: Error: Mapping msix entry 13
pt_msix_update_one: Error: Mapping msix entry 14
pt_msix_update_one: Error: Mapping msix entry 15
pt_msix_update_one: Error: Mapping msix entry 16
pt_msix_update_one: Error: Mapping msix entry 17
pt_msix_update_one: Error: Mapping msix entry 18
pt_msix_update_one: Error: Mapping msix entry 19
pt_msix_update_one: Error: Mapping msix entry 1a
pt_msix_update_one: Error: Mapping msix entry 1b
pt_msix_update_one: Error: Mapping msix entry 1c
pt_msix_update_one: Error: Mapping msix entry 1d
pt_msix_update_one: Error: Mapping msix entry 1e
pt_msix_update_one: Error: Mapping msix entry 1f


(XEN) Guest interrupt information:
(XEN)    IRQ:  30 affinity:00000000,00000000,00000000,00000001 vec:59 type=IO-APIC-level   status=00000010 in-flight=0 domain-list=2: 30(----),
(XEN)    IRQ:  37 affinity:00000000,00000000,00000000,00000001 vec:51 type=IO-APIC-level   status=00000010 in-flight=0 domain-list=2: 37(----),
(XEN)    IRQ:  76 affinity:00000000,00000000,00000000,00000001 vec:3e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 77(----),
(XEN)    IRQ:  77 affinity:00000000,00000000,00000000,00000001 vec:46 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 76(----),
(XEN)    IRQ:  78 affinity:00000000,00000000,00000000,00000001 vec:4e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 75(----),
(XEN)    IRQ:  79 affinity:00000000,00000000,00000000,00000001 vec:56 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 74(----),
(XEN)    IRQ:  80 affinity:00000000,00000000,00000000,00000001 vec:5e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 73(----),
(XEN)    IRQ:  81 affinity:00000000,00000000,00000000,00000001 vec:66 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 72(----),
(XEN)    IRQ:  82 affinity:00000000,00000000,00000000,00000001 vec:6e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 71(----),
(XEN)    IRQ:  83 affinity:00000000,00000000,00000000,00000001 vec:76 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 70(----),
(XEN)    IRQ:  84 affinity:00000000,00000000,00000000,00000001 vec:7e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 69(----),
(XEN)    IRQ:  85 affinity:00000000,00000000,00000000,00000001 vec:86 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 68(----),
(XEN)    IRQ:  86 affinity:00000000,00000000,00000000,00000001 vec:8e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 67(----),
(XEN)    IRQ:  87 affinity:00000000,00000000,00000000,00000001 vec:96 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 66(----),
(XEN)    IRQ:  88 affinity:00000000,00000000,00000000,00000001 vec:9e type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 65(----),
(XEN)    IRQ:  89 affinity:00000000,00000000,00000000,00000001 vec:a6 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 64(----),
(XEN)    IRQ:  90 affinity:00000000,00000000,00000000,00000001 vec:ae type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 63(----),
(XEN)    IRQ:  91 affinity:00000000,00000000,00000000,00000001 vec:b6 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 62(----),
(XEN)    IRQ:  92 affinity:00000000,00000000,00000000,00000001 vec:be type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 61(----),
(XEN)    IRQ:  93 affinity:00000000,00000000,00000000,00000001 vec:c6 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 60(----),
(XEN)    IRQ:  94 affinity:00000000,00000000,00000000,00000001 vec:ce type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 59(----),
(XEN)    IRQ:  95 affinity:00000000,00000000,00000000,00000001 vec:d6 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 58(----),
(XEN)    IRQ:  96 affinity:00000000,00000000,00000000,00000001 vec:de type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 57(----),
(XEN)    IRQ:  97 affinity:00000000,00000000,00000000,00000001 vec:27 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 56(----),
(XEN)    IRQ:  98 affinity:00000000,00000000,00000000,00000001 vec:2f type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 55(----),
(XEN)    IRQ:  99 affinity:00000000,00000000,00000000,00000001 vec:37 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 54(----),
(XEN)    IRQ: 100 affinity:00000000,00000000,00000000,00000001 vec:3f type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 53(----),
(XEN)    IRQ: 101 affinity:00000000,00000000,00000000,00000001 vec:47 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 52(----),
(XEN)    IRQ: 102 affinity:00000000,00000000,00000000,00000001 vec:4f type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 51(----),
(XEN)    IRQ: 103 affinity:00000000,00000000,00000000,00000001 vec:57 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 50(----),
(XEN)    IRQ: 104 affinity:00000000,00000000,00000000,00000001 vec:5f type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 49(----),
(XEN)    IRQ: 105 affinity:00000000,00000000,00000000,00000001 vec:67 type=PCI-MSI         status=00000050 in-flight=0 domain-list=2: 48(----),
(XEN) PCI-MSI interrupt information:
(XEN)  MSI    49 vec=b0  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    50 vec=b8  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    51 vec=c0  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    52 vec=c8  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    53 vec=d0  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    54 vec=d8  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    55 vec=21  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    56 vec=29  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    57 vec=31  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    58 vec=39  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    59 vec=41  fixed  edge   assert phys    cpu dest=00000000 mask=0/1/-1
(XEN)  MSI    60 vec=49  fixed  edge   assert phys    cpu dest=00000000 mask=0/1/-1
(XEN)  MSIX   61 vec=c9  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSIX   62 vec=d1  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSIX   63 vec=2a  fixed  edge   assert phys    cpu dest=00000017 mask=1/0/0
(XEN)  MSIX   64 vec=22  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSIX   65 vec=d2  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   66 vec=da  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   67 vec=23  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   68 vec=2b  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   69 vec=33  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   70 vec=3b  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   71 vec=43  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   72 vec=4b  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   73 vec=53  fixed  edge   assert phys    cpu dest=00000000 mask=1/1/1
(XEN)  MSI    74 vec=2e  fixed  edge   assert phys    cpu dest=00000000 mask=0/1/-1
(XEN)  MSI    75 vec=36  fixed  edge   assert phys    cpu dest=00000000 mask=0/1/-1
(XEN)  MSIX   76 vec=3e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   77 vec=46  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   78 vec=4e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   79 vec=56  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   80 vec=5e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   81 vec=66  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   82 vec=6e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   83 vec=76  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   84 vec=7e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   85 vec=86  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   86 vec=8e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   87 vec=96  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   88 vec=9e  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   89 vec=a6  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   90 vec=ae  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   91 vec=b6  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   92 vec=be  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   93 vec=c6  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   94 vec=ce  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   95 vec=d6  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   96 vec=de  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   97 vec=27  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   98 vec=2f  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX   99 vec=37  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  100 vec=3f  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  101 vec=47  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  102 vec=4f  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  103 vec=57  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  104 vec=5f  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN)  MSIX  105 vec=67  fixed  edge   assert phys    cpu dest=00000000 mask=1/0/0
(XEN) [Q: dump PCI devices]
(XEN) ==== PCI devices ====
(XEN) 0d:00.1 - dom 2   - MSIs < 75 >
(XEN) 0d:00.0 - dom 2   - MSIs < 74 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.