[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re[8]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0


  • To: xen-users@xxxxxxxxxxxxxxxxxxx, doom <doom28@xxxxxxx>
  • From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
  • Date: Wed, 2 Jun 2010 06:08:16 -0700 (PDT)
  • Cc:
  • Delivery-date: Wed, 02 Jun 2010 06:10:07 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=RGnlVc1GyIk85V10GDJvTk1s+4i9CdthrT6zhlv1Hr6RSnh0dWjp/i1q9tI4lb6r6D8H22SCp3127H5BqNmgzLXlKQPQoLZfG1UQv/rDMN7ZoqUmhM/Bw03zJw7umnHs1TznADOriG0l2QRpcsDgRYlwS+VnwfKDJGxBwBjnLvk=;
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

>Device -> Graphics-> I enable(d ?)  AGPGART and in submenu Intel Griver.
It was enabled by default or you did it ?
It's not quite clear.

--- On Wed, 6/2/10, doom <doom28@xxxxxxx> wrote:

From: doom <doom28@xxxxxxx>
Subject: Re[8]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0
To: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, June 2, 2010, 8:26 AM

Device -> Graphics-> I enable AGPGART and in submenu Intel Griver. 

First. Very bad idea call it AGP... My PC does not have AGP BUS and I disable it, because i have PCIE.


And now Xorg working :) Yeeaaah ! Uraa!


Next. I try to make VM...




You are right.


--- On Wed, 6/2/10, doom <doom28@xxxxxxx> wrote:



From: doom <doom28@xxxxxxx>

Subject: Re[6]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0

To: xen-users@xxxxxxxxxxxxxxxxxxx

Date: Wednesday, June 2, 2010, 5:15 AM



But  2.6.32-22-server (no Xen) kernel loading i915 driver for my VGA


How in standart kernel driver exist? but in Xen kernel not exist ??


 



> 82Q35 


 <M>   Intel 830M, 845G, 852GM, 855GM, 865G                               

                < >     i830 driver                                                           

                < >     i915 driver                        


I am not sure kernel has driver for this chip.

Escalate to xen-devel.


Boris.


--- On Wed, 6/2/10, doom <doom28@xxxxxxx> wrote:



From: doom <doom28@xxxxxxx>

Subject: Re[4]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0

To: xen-users@xxxxxxxxxxxxxxxxxxx

Date: Wednesday, June 2, 2010, 4:52 AM



System Profiler detect adapter as  Intel Corporation 82Q35 Express Integrated Video Graphics Controller





VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller


Thiago



2010/6/1 Boris Derzhavets <bderzhavets@xxxxxxxxx>


What Intel video chip you have integrated on the board ?


Boris.


--- On Tue, 6/1/10, doom <doom28@xxxxxxx> wrote:



From: doom <doom28@xxxxxxx>

Subject: Re[2]: [Xen-users] Running Xen 4.0.0-rc8 with Linux 2.6.32.10 paravirt_ops dom0

To: xen-users@xxxxxxxxxxxxxxxxxxx

Cc: "Martinx - $B!&$B!&ï$B!&$B!&ï$B!&$B!&ï$B!&$B!&ï$B!&$B!&ï" <thiagocmartinsc@xxxxxxxxx>

Date: Tuesday, June 1, 2010, 9:10 AM




Hi!

I have processor C2D E8400 on Q35 intel desktop board with integrated GPU, and 2 ethernet cards.

Now, I disable DRM completely. Rebuild the kernel and install again.ïïNow, GUI appear,ïï

but Xorg print errors and may work in only low resolution. Below I give log Xorg and lspci. And config kernel with xorg ïïlog in attach.




========================


cat /var/log/Xorg.0.log


X.Org X Server 1.7.6

Release Date: 2010-03-17

X Protocol Version 11, Revision 0

Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu

Current Operating System: Linux gnezdo 2.6.32.14 #10 SMP Tue Jun 1 15:54:48 MSD 2010 x86_64

Kernel command line: root=/dev/mapper/raptor--gv-root--lv ro

Build Date: 23 April 2010 ïï05:11:46PM

xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@xxxxxxxxxx>)ïï

Current version of pixman: 0.16.4

Before reporting problems, check http://wiki.x.org

to make sure that you have the latest version.

Markers: (--) probed, (**) from config file, (==) default setting,

(++) from command line, (!!) notice, (II) informational,

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.

(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun ïï1 17:02:18 2010

(==) Using config directory: "/usr/lib/X11/xorg.conf.d"

(==) No Layout section. ïïUsing the first Screen section.

(==) No screen section available. Using defaults.

(**) |-->Screen "Default Screen Section" (0)

(**) | ïï |-->Monitor "<default monitor>"

(==) No monitor specified for screen "Default Screen Section".

Using a default monitor configuration.

(==) Automatically adding devices

(==) Automatically enabling devices

(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

Entry deleted from font path.

(==) FontPath set to:

/usr/share/fonts/X11/misc,

/usr/share/fonts/X11/100dpi/:unscaled,

/usr/share/fonts/X11/75dpi/:unscaled,

/usr/share/fonts/X11/Type1,

/usr/share/fonts/X11/100dpi,

/usr/share/fonts/X11/75dpi,

/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,

built-ins

(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"

(II) The server relies on udev to provide the list of input devices.

If no devices become available, reconfigure udev or disable AutoAddDevices.

(II) Loader magic: 0x7ca300

(II) Module ABI versions:

X.Org ANSI C Emulation: 0.4

X.Org Video Driver: 6.0

X.Org XInput driver : 7.0

X.Org Server Extension : 2.0

(++) using VT number 7


(--) PCI:*(0:0:2:0) 8086:29b2:8086:4f4a Intel Corporation 82Q35 Express Integrated Graphics Controller rev 2, Mem @ 0xe0300000/524288, 0xd0000000/268435456, 0xe0200000/1048576, I/O @ 0x00003458/8

(II) Open ACPI successful (/var/run/acpid.socket)

(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so

(II) Module extmod: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension MIT-SCREEN-SAVER

(II) Loading extension XFree86-VidModeExtension

(II) Loading extension XFree86-DGA

(II) Loading extension DPMS

(II) Loading extension XVideo

(II) Loading extension XVideo-MotionCompensation

(II) Loading extension X-Resource

(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so

(II) Module dbe: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension DOUBLE-BUFFER

(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions/libglx.so

(II) Module glx: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org Server Extension, version 2.0

(==) AIGLX enabled

(II) Loading extension GLX

(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions/librecord.so

(II) Module record: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.13.0

Module class: X.Org Server Extension

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension RECORD

(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions/libdri.so

(II) Module dri: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension XFree86-DRI

(II) LoadModule: "dri2"

(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so

(II) Module dri2: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.1.0

ABI class: X.Org Server Extension, version 2.0

(II) Loading extension DRI2

(==) Matched intel as autoconfigured driver 0

(==) Matched vesa as autoconfigured driver 1

(==) Matched fbdev as autoconfigured driver 2

(==) Assigned the driver to the xf86ConfigLayout

(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

(II) Module intel: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 2.9.1

Module class: X.Org Video Driver

ABI class: X.Org Video Driver, version 6.0

(II) LoadModule: "vesa"

(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

(II) Module vesa: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 2.3.0

Module class: X.Org Video Driver

ABI class: X.Org Video Driver, version 6.0

(II) LoadModule: "fbdev"

(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

(II) Module fbdev: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.4.1

ABI class: X.Org Video Driver, version 6.0

(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,

i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,

E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,

965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,

4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale

(II) VESA: driver for VESA chipsets: vesa

(II) FBDEV: driver for framebuffer: fbdev

(II) Primary Device is: PCI 00@00:02:0

(WW) Falling back to old probe method for vesa

(WW) Falling back to old probe method for fbdev

(II) Loading sub module "fbdevhw"

(II) LoadModule: "fbdevhw"

(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so

(II) Module fbdevhw: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.0.2

ABI class: X.Org Video Driver, version 6.0

(EE) open /dev/fb0: No such file or directory

(II) Loading sub module "vgahw"

(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules/libvgahw.so

(II) Module vgahw: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 0.1.0

ABI class: X.Org Video Driver, version 6.0

(II) Loading sub module "ramdac"

(II) LoadModule: "ramdac"

(II) Module "ramdac" already built-in

drmOpenDevice: node name is /dev/dri/card0

[drm] failed to load kernel module "i915"

(EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: No such file or directory

(EE) intel(0): Failed to become DRM master.

(II) intel(0): Creating default Display subsection in Screen section

"Default Screen Section" for depth/fbbpp 24/32

(==) intel(0): Depth 24, (--) framebuffer bpp 32

(==) intel(0): RGB weight 888

(==) intel(0): Default visual is TrueColor

(II) intel(0): Integrated Graphics Chipset: Intel(R) Q35

(--) intel(0): Chipset: "Q35"

(--) intel(0): Linear framebuffer at 0xD0000000

(--) intel(0): IO registers at addr 0xE0300000 size 524288

(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB

(II) intel(0): No SDVO device is found in VBT

(II) intel(0): 2 display pipes available.

(II) Loading sub module "ddc"

(II) LoadModule: "ddc"

(II) Module "ddc" already built-in

(II) Loading sub module "i2c"

(II) LoadModule: "i2c"

(II) Module "i2c" already built-in

(II) intel(0): Output VGA has no monitor section

(II) intel(0): I2C bus "CRTDDC_A" initialized.

(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.

(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.

(II) intel(0): I2C bus "CRTDDC_A" removed.

(II) intel(0): EDID for output VGA

(II) intel(0): Manufacturer: NEC ïïModel: 6662 ïïSerial#: 16843009

(II) intel(0): Year: 2005 ïïWeek: 20

(II) intel(0): EDID Version: 1.3

(II) intel(0): Analog Display Input, ïïInput Voltage Level: 0.700/0.300 V

(II) intel(0): Sync: ïïSeparate ïïComposite ïïSyncOnGreen

(II) intel(0): Max Image Size [cm]: horiz.: 38 ïïvert.: 30

(II) intel(0): Gamma: 2.20

(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display

(II) intel(0): First detailed timing is preferred mode

(II) intel(0): redX: 0.640 redY: 0.344 ïï greenX: 0.299 greenY: 0.608

(II) intel(0): blueX: 0.145 blueY: 0.074 ïï whiteX: 0.313 whiteY: 0.329

(II) intel(0): Supported established timings:

(II) intel(0): 720x400@70Hz

(II) intel(0): 640x480@60Hz

(II) intel(0): 640x480@67Hz

(II) intel(0): 640x480@72Hz

(II) intel(0): 640x480@75Hz

(II) intel(0): 800x600@56Hz

(II) intel(0): 800x600@60Hz

(II) intel(0): 800x600@72Hz

(II) intel(0): 800x600@75Hz

(II) intel(0): 832x624@75Hz

(II) intel(0): 1024x768@60Hz

(II) intel(0): 1024x768@70Hz

(II) intel(0): 1024x768@75Hz

(II) intel(0): 1280x1024@75Hz

(II) intel(0): 1152x864@75Hz

(II) intel(0): Manufacturer's mask: 0

(II) intel(0): Supported standard timings:

(II) intel(0): #0: hsize: 1152 ïïvsize 864 ïïrefresh: 75 ïïvid: 20337

(II) intel(0): #1: hsize: 1280 ïïvsize 960 ïïrefresh: 60 ïïvid: 16513

(II) intel(0): #2: hsize: 1280 ïïvsize 1024 ïïrefresh: 60 ïïvid: 32897

(II) intel(0): Supported detailed timing:

(II) intel(0): clock: 108.0 MHz ïï Image Size: ïï376 x 301 mm

(II) intel(0): h_active: 1280 ïïh_sync: 1328 ïïh_sync_end 1440 h_blank_end 1688 h_border: 0

(II) intel(0): v_active: 1024 ïïv_sync: 1025 ïïv_sync_end 1028 v_blanking: 1066 v_border: 0

(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz

(II) intel(0): Monitor name: LCD1970NX

(II) intel(0): Serial No: 55125437YB

(II) intel(0): EDID (in hex):

(II) intel(0): 00ffffffffffff0038a3626601010101

(II) intel(0): 140f01030e261e78eacb05a3584c9b25

(II) intel(0): 135054bfef80714f8140818001010101

(II) intel(0): 010101010101302a009851002a403070

(II) intel(0): 1300782d1100001e000000fd00384b1f

(II) intel(0): 510e000a202020202020000000fc004c

(II) intel(0): 4344313937304e580a202020000000ff

(II) intel(0): 00353531323534333759420a2020000c

(II) intel(0): EDID vendor "NEC", prod id 26210

(II) intel(0): Using EDID range info for horizontal sync

(II) intel(0): Using EDID range info for vertical refresh

(II) intel(0): Printing DDC gathered Modelines:

(II) intel(0): Modeline "1280x1024"x0.0 ïï108.00 ïï1280 1328 1440 1688 ïï1024 1025 1028 1066 +hsync +vsync (64.0 kHz)

(II) intel(0): Modeline "800x600"x0.0 ïï 40.00 ïï800 840 968 1056 ïï600 601 605 628 +hsync +vsync (37.9 kHz)

(II) intel(0): Modeline "800x600"x0.0 ïï 36.00 ïï800 824 896 1024 ïï600 601 603 625 +hsync +vsync (35.2 kHz)

(II) intel(0): Modeline "640x480"x0.0 ïï 31.50 ïï640 656 720 840 ïï480 481 484 500 -hsync -vsync (37.5 kHz)

(II) intel(0): Modeline "640x480"x0.0 ïï 31.50 ïï640 664 704 832 ïï480 489 492 520 -hsync -vsync (37.9 kHz)

(II) intel(0): Modeline "640x480"x0.0 ïï 30.24 ïï640 704 768 864 ïï480 483 486 525 -hsync -vsync (35.0 kHz)

(II) intel(0): Modeline "640x480"x0.0 ïï 25.18 ïï640 656 752 800 ïï480 490 492 525 -hsync -vsync (31.5 kHz)

(II) intel(0): Modeline "720x400"x0.0 ïï 28.32 ïï720 738 846 900 ïï400 412 414 449 -hsync +vsync (31.5 kHz)

(II) intel(0): Modeline "1280x1024"x0.0 ïï135.00 ïï1280 1296 1440 1688 ïï1024 1025 1028 1066 +hsync +vsync (80.0 kHz)

(II) intel(0): Modeline "1024x768"x0.0 ïï 78.75 ïï1024 1040 1136 1312 ïï768 769 772 800 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1024x768"x0.0 ïï 75.00 ïï1024 1048 1184 1328 ïï768 771 777 806 -hsync -vsync (56.5 kHz)

(II) intel(0): Modeline "1024x768"x0.0 ïï 65.00 ïï1024 1048 1184 1344 ïï768 771 777 806 -hsync -vsync (48.4 kHz)

(II) intel(0): Modeline "832x624"x0.0 ïï 57.28 ïï832 864 928 1152 ïï624 625 628 667 -hsync -vsync (49.7 kHz)

(II) intel(0): Modeline "800x600"x0.0 ïï 49.50 ïï800 816 896 1056 ïï600 601 604 625 +hsync +vsync (46.9 kHz)

(II) intel(0): Modeline "800x600"x0.0 ïï 50.00 ïï800 856 976 1040 ïï600 637 643 666 +hsync +vsync (48.1 kHz)

(II) intel(0): Modeline "1152x864"x0.0 ïï108.00 ïï1152 1216 1344 1600 ïï864 865 868 900 +hsync +vsync (67.5 kHz)

(II) intel(0): Modeline "1280x960"x0.0 ïï108.00 ïï1280 1376 1488 1800 ïï960 961 964 1000 +hsync +vsync (60.0 kHz)

(II) intel(0): EDID vendor "NEC", prod id 26210

(II) intel(0): Printing probed modes for output VGA

(II) intel(0): Modeline "1280x1024"x60.0 ïï108.00 ïï1280 1328 1440 1688 ïï1024 1025 1028 1066 +hsync +vsync (64.0 kHz)

(II) intel(0): Modeline "1280x1024"x75.0 ïï135.00 ïï1280 1296 1440 1688 ïï1024 1025 1028 1066 +hsync +vsync (80.0 kHz)

(II) intel(0): Modeline "1280x960"x60.0 ïï108.00 ïï1280 1376 1488 1800 ïï960 961 964 1000 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1152x864"x75.0 ïï108.00 ïï1152 1216 1344 1600 ïï864 865 868 900 +hsync +vsync (67.5 kHz)

(II) intel(0): Modeline "1024x768"x75.0 ïï 78.75 ïï1024 1040 1136 1312 ïï768 769 772 800 +hsync +vsync (60.0 kHz)

(II) intel(0): Modeline "1024x768"x70.1 ïï 75.00 ïï1024 1048 1184 1328 ïï768 771 777 806 -hsync -vsync (56.5 kHz)

(II) intel(0): Modeline "1024x768"x60.0 ïï 65.00 ïï1024 1048 1184 1344 ïï768 771 777 806 -hsync -vsync (48.4 kHz)

(II) intel(0): Modeline "832x624"x74.6 ïï 57.28 ïï832 864 928 1152 ïï624 625 628 667 -hsync -vsync (49.7 kHz)

(II) intel(0): Modeline "800x600"x72.2 ïï 50.00 ïï800 856 976 1040 ïï600 637 643 666 +hsync +vsync (48.1 kHz)

(II) intel(0): Modeline "800x600"x75.0 ïï 49.50 ïï800 816 896 1056 ïï600 601 604 625 +hsync +vsync (46.9 kHz)

(II) intel(0): Modeline "800x600"x60.3 ïï 40.00 ïï800 840 968 1056 ïï600 601 605 628 +hsync +vsync (37.9 kHz)

(II) intel(0): Modeline "800x600"x56.2 ïï 36.00 ïï800 824 896 1024 ïï600 601 603 625 +hsync +vsync (35.2 kHz)

(II) intel(0): Modeline "640x480"x75.0 ïï 31.50 ïï640 656 720 840 ïï480 481 484 500 -hsync -vsync (37.5 kHz)

(II) intel(0): Modeline "640x480"x72.8 ïï 31.50 ïï640 664 704 832 ïï480 489 492 520 -hsync -vsync (37.9 kHz)

(II) intel(0): Modeline "640x480"x66.7 ïï 30.24 ïï640 704 768 864 ïï480 483 486 525 -hsync -vsync (35.0 kHz)

(II) intel(0): Modeline "640x480"x59.9 ïï 25.18 ïï640 656 752 800 ïï480 490 492 525 -hsync -vsync (31.5 kHz)

(II) intel(0): Modeline "720x400"x70.1 ïï 28.32 ïï720 738 846 900 ïï400 412 414 449 -hsync +vsync (31.5 kHz)

(II) intel(0): Output VGA connected

(II) intel(0): Using exact sizes for initial modes

(II) intel(0): Output VGA using initial mode 1280x1024

(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

(II) intel(0): detected 2048 kB GTT.

(II) intel(0): detected 6140 kB stolen memory.

(==) intel(0): video overlay key set to 0x101fe

(**) intel(0): Display dimensions: (380, 300) mm

(**) intel(0): DPI set to (85, 86)

(II) Loading sub module "fb"

(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules/libfb.so

(II) Module fb: vendor="X.Org Foundation"

compiled for 1.7.6, module version = 1.0.0

ABI class: X.Org ANSI C Emulation, version 0.4

(II) intel(0): Comparing regs from server start up to After PreInit

(II) UnloadModule: "vesa"

(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so

(II) UnloadModule: "fbdev"

(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so

(II) UnloadModule: "fbdevhw"

(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so

(==) Depth 24 pixmap format is 32 bpp

(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)

(EE) intel(0): /dev/agpgart is either not available, or no memory is available

for allocation. ïïPlease enable agpgart

.(WW) intel(0): VideoRam reduced to 6136 KB (page aligned - was 6139 KB)

(WW) intel(0): DRI2: failed to open drm device

(**) intel(0): Framebuffer compression disabled

(**) intel(0): Tiling enabled

(**) intel(0): SwapBuffers wait enabled

(EE) intel(0): Failed to initialize kernel memory manager

(==) intel(0): VideoRam: 6136 KB

(II) intel(0): Attempting memory allocation with tiled buffers.

(EE) intel(0): AGP GART support is either not available or cannot be used.

Make sure your kernel has agpgart support or has

the agpgart module loaded.

(II) intel(0): Tiled allocation failed.

(II) intel(0): Attempting memory allocation with untiled buffers.

(EE) intel(0): AGP GART support is either not available or cannot be used.

Make sure your kernel has agpgart support or has

the agpgart module loaded.

(II) intel(0): Untiled allocation failed.

(EE) intel(0): Couldn't allocate video memory


Fatal server error:

AddScreen/ScreenInit failed for driver 0



Please consult the The X.Org Foundation supportïï

ïïat http://wiki.x.org

ïïfor help.ïï

Please also check the log file at "/var/log/Xorg.0.log" for additional information.


ïïddxSigGiveUp: Closing log


=========================================================$ lspci

00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)

00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)

00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)

00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02)

00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT Controller (rev 02)

00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)

00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)

00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface Controller (rev 02)

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b2)

06:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet Adapter (rev 10)




Hi!


ïïCan you attach your /var/log/Xorg.0.log file?

ïïWhat is your video board? Can you show the output of the lspci command?


Regards,

Thiago



2010/5/31 doom <doom28@xxxxxxx>


Config from here

http://lists.xensource.com/archives/html/xen-users/2010-03/msg00878.html

work and my PC boot until switch in GUI mode.

When start X display off and no signal, but server working and receive ssh connection.

How can I make GUI work ?




_______________________________________________

Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users





--ïï

ïï ï$B!&ïïïïïïïïïïïïïïïï,

ïïdoom ïï ïï ïï ïï ïï ïï ïï ïï ïï ïï ïï ïï ïïmailto:doom28@xxxxxxx

-----Inline Attachment Follows-----




_______________________________________________

Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users





-- 

$B'3 $B'e$B'S$B'Q$B'X$B'V$B'_$B'Z$B'V$B'^,

 doom                          mailto:doom28@xxxxxxx


-----Inline Attachment Follows-----



_______________________________________________

Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users





-- 

Ð ÑÐÐÐÐÐÐÐÐ,

 doom                          mailto:doom28@xxxxxxx


-----Inline Attachment Follows-----



_______________________________________________

Xen-users mailing list

Xen-users@xxxxxxxxxxxxxxxxxxx

http://lists.xensource.com/xen-users





-- 

Ð ÑÐÐÐÐÐÐÐÐ,

 doom                          mailto:doom28@xxxxxxx


-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.