[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-bugs] pvops kernel hangs during boot.

I am getting this log messages , handwritten  (as all are not getting logged into the /var/log/messages )

ata5.00: configured for UDMA/100
sda1 sda2
sd 2:0:0:0: [sda] attached SCSI disk
ata4: SATA link up 3.0 Gbps [SStatus 123 SControl 300]
ata4.00: ATA-7: WDCWD1600AAJS-75PSA0,05.06H05,max UDMA/133
ata4.00:312500000 sectors , multi1:LBA48 NCQ (depth 0/32)
ata4.00:configured for UDMA/133
scsi 3:0:0:0 Direct access  ATA WDC WD1600AAJS-7 05.0 PQ: 0 ANSI:5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 312500000 512 byte logical blocks: (160 GB/149GiB)
sd 3:0:0:0: [sdb] Write Protect off
sd 3:0:0:0: [sdb] Write cache : enabled,read cache : enabled , doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM  HL-DT-ST DVD+-RW GSA-H73N B103 PQ 0 ANSI:5
sr0: scsi3-mmc drive : 125x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision : 3.20
sr 4:0:0:0: Attached scsi generic sg2 type 5
sd 3:0:0:0: [sdb] Attached SCSI disk
ata6 : SATA link down (SStatus 0 SControl 300)
----------------- STUCK --------------------------------------

Machine :

[onkar@localhost xen-4.0.0]$ uname -a
Linux localhost.localdomain #1 SMP Sat Nov 7 21:11:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux

Config file for pvops attached.


Attachment: config-
Description: Binary data

Xen-bugs mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.