RE: [Xen-users] Troubleshooting Xen 4.0 + 2.6.32.16 pv_ops install

[Matej Zary <matej.zary@xxxxxxxxx>]

And also there's link to this dedicated wiki page - 
http://wiki.xensource.com/xenwiki/XenSerialConsole.


Regards

Matej

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Boris Derzhavets
Sent: Thursday, July 15, 2010 1:30 PM
To: Peter Braun
Cc: Xen List
Subject: Re: [Xen-users] Troubleshooting Xen 4.0 + 2.6.32.16 pv_ops install

> How to get serial output of dom0 kernel?
View http://wiki.xensource.com/xenwiki/XenParavirtOps. Sample is there.

Boris.

--- On Thu, 7/15/10, Peter Braun <xenware@xxxxxxxxx> wrote:



        From: Peter Braun <xenware@xxxxxxxxx>
        Subject: Re: [Xen-users] Troubleshooting Xen 4.0 + 2.6.32.16 pv_ops 
install
        To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
        Cc: "Xen List" <xen-users@xxxxxxxxxxxxxxxxxxx>
        Date: Thursday, July 15, 2010, 7:23 AM
        
        
        Yes, its working.
        I use it for testing for long time.
        How to get serial output of dom0 kernel?
        
        2010/7/15, Boris Derzhavets <bderzhavets@xxxxxxxxx>:
        >> Also me myself  booted this kernel config correctly in vmware machine
        >> with
        >  mirror sw configuration.
        >
        > It's a bit confusing.
        > Are you saying , that you loaded Xen Hypervisor in VMWare VM and then
        > tried to load kernel with Dom0 support in the same VM under Xen ?
        >
        > Boris.
        >
        > --- On Thu, 7/15/10, Peter Braun <xenware@xxxxxxxxx> wrote:
        >
        > From: Peter Braun <xenware@xxxxxxxxx>
        > Subject: [Xen-users] Troubleshooting Xen 4.0 + 2.6.32.16 pv_ops 
install
        > To: "Xen List" <xen-users@xxxxxxxxxxxxxxxxxxx>
        > Date: Thursday, July 15, 2010, 6:37 AM
        >
        > Hi,
        >
        > I have several servers Supermicro - running Xen 3.4.1 @ debian 5.0 x64
        > running without any issues for more than year.
        >
        > Now I bought new server with exactly same config and installed Ubuntu
        > 10.04 x64 - Xen 4.0.1-rc4 - 2.6.32.16 pv_ops
        >
        > - base Ubuntu 10.04 install boot without issues
        > - Xen 4.0.1-rc4 compiled and installed withou any problems
        > - 2.6.32.16 pv_ops dom0 kernel with custom config. That config has
        > Boris verified as working here in mailing list.
        >   Also me mysel booted this kernel config correctly in vmware machine
        > with mirror sw configuration.
        >
        > I tried to boot dom0 kernels:
        > - from older machines 2.6.18.8
        > - Debian 2.6.32 backports
        > with same result - reboot after Xen 4.0.1
        >
        > Boot process:
        > Xen 4.0.1 part boots OK afterward processing dom0 kernel get machine
        > to hard reset. I dont see anything on screen.
        > The machine is remote - i have supermicro KVM console connection.
        > There is option for serial console output.
        >
        >
        > Please can you point me how to troubleshoot this ?
        >
        > Thanks
        >
        > Peter
        >
        > _______________________________________________
        > Xen-users mailing list
        > Xen-users@xxxxxxxxxxxxxxxxxxx
        > http://lists.xensource.com/xen-users
        >
        >
        >
        >
        
        _______________________________________________
        Xen-users mailing list
        Xen-users@xxxxxxxxxxxxxxxxxxx
        http://lists.xensource.com/xen-users
        



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users