[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Accessing console for Xen 4.0 with 2.6.31 pvops kernel on Dell Poweredge R610



On Sun, Jul 18, 2010 at 08:43:40PM -0400, Adit Ranadive wrote:
>    I am currently using a Dell PowerEdge server R610 with Xen 4.0 installed
>    and the 2.6.31.13 pvops kernel.
>    I am accessing the server console using the iDRAC KVM feature of the dell
>    management console.
>    Does anyone know how to configure the console option in the grub menu so
>    that all the boot messages can be seen on the
>    mgmt console?
>    Currently I can view only the Xen bootup messages if I dont specify the
>    console=xxx option on the kernel line. I cant see any of
>    the linux kernel boot up messages. Specifying console=xxx on the kernel
>    module line doesnt work either.
>    Has anyone worked with this sort of config before? Is there anything else
>    I can specify on the kernel/module line so that all
>    the bootup messages are visible?
> 
>    Below is my grub menu:
>    title Red Hat Enterprise Linux Server (2.6.18-164.6.1.el5)
>        root (hd0,0)
>        kernel /vmlinuz-2.6.18-164.6.1.el5 ro root=/dev/vg1/root
>        initrd /initrd-2.6.18-164.6.1.el5.img
> 
>    title Xen 4.0 - Linux 2.6.31.13 pvops
>        root (hd0,0)
>        kernel /xen.gz noreboot loglvl=all guest_loglvl=all iommu=1
>        module /vmlinuz-2.6.31.13 ro root=/dev/vg1/root loglevel=10 
> swiotlb=force earlyprintk=xen console=hvc0
>        module /initrd-2.6.31.13.img
> 

That should work. You could try adding "nomodeset" parameter, to disable the 
kernel modesetting (KMS) stuff.
Maybe that messes up the console.

You could also enable the SOL serial console:
http://wiki.xensource.com/xenwiki/XenSerialConsole

-- Pasi

>    title Xen 4.0 - Linux 2.6.18.8
>        root (hd0,0)
>        kernel /xen.gz loglvl=all guest_loglvl=all
>        module /vmlinuz-2.6.18.8-xen0 ro root=/dev/vg1/root earlyprintk=xen
>        module /initrd-2.6.18.8-xen0.img
> 
>    P.S.: Ive tried using the 2.6.18.8 kernel and that seems to show
>    everything fine on the console.
> 
>    Thanks,
>    Adit

> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.