[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] pvgrub doesn't read grub-config



Am Mittwoch, den 04.08.2010, 21:29 +0700 schrieb Fajar A. Nugraha:
> On Wed, Aug 4, 2010 at 8:07 PM, Tim Bordemann <t.bordemann@xxxxxx>
> wrote:
>         kernel = "/usr/lib/xen/boot/pv-grub-x86_64.gz"
>         extra = "(hd1)/boot/grub/menu.lst"
>         disk        = [   'phy:/dev/vg0/testmigration-disk,xvda2,w',
>                          'phy:/dev/vg0/testmigration-swap,xvda1,w',
>                      ]
>  
>         After creating the VM I always get to the grubdom commandline.
>         When I
>         type in "configfile (hd1)/boot/grub/menu.lst" (exactly the
>         same as the
>         extra line in the VM's configfile), the machine starts to
>         boot.
>         Am I missing anything?
>         
> 
> 
> I have a suspicion that somehow your hd0 and hd1 got mixed up. What
> happens if you change the disk order? something like
> 
> 
> disk        =  [ 
>    'phy:/dev/vg0/testmigration-swap,xvda1,w',
>    'phy:/dev/vg0/testmigration-disk,xvda2,w', 
>    ]

Unfortunalety the problem persists. There is no (visible) change, I see
the grubdom again and the vm boots up after giving grub the location of
the configfile.
Is there a logfile I haven't found yet which could help fixing this?

Tim



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.