Xen project Mailing List

Hello Boris:
I did it, but I've got the same result.
thank you very much.
Marcela

2010/11/2 Boris Derzhavets <bderzhavets@xxxxxxxxx>

menuentry "Xen 4.0.1 / Ubuntu 10.04 kernel 2.6.32.24" {
recordfail
insmod ext2
set root='(hd0,5)'
multiboot (hd0,5)/boot/xen-4.0.1.gz dom0_mem=1024M loglvl=all guest_loglvl=all sync_console
module (hd0,5)/boot/vmlinuz-2.6.32-24 root=/dev/sda5 ro nomodeset
module (hd0,5)/boot/initrd.img-2.6.32-24
}

If this is your config, i would change it :-

menuentry "Xen 4.0.1 / Ubuntu 10.04 kernel 2.6.32.24" {
recordfail
insmod ext2
set root='(hd0,5)'
multiboot (hd0,5)/boot/xen-4.0.1.gz dom0_mem=1024M loglvl=all guest_loglvl=all
module (hd0,5)/boot/vmlinuz-2.6.32-24 root=/dev/sda5 ro console=tty0
module (hd0,5)/boot/initrd.img-2.6.32-24
}

Boris.

--- On Tue, 11/2/10, Marcela Castro León <mcastrol@xxxxxxxxx> wrote:

From: Marcela Castro León <mcastrol@xxxxxxxxx>
Subject: Re: [Xen-users] Installing Xen 4.0.1 on Ubuntu 10.04
To: "Bruce Edge" <bruce.edge@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Tuesday, November 2, 2010, 10:10 AM

Hello
This is the grub.cfg. The system hangs-up when try to boot with dom0 kernel, so, I can't ping any host. The last message that show is
"(XEN) dom0 kernel not specified. Check bootloader configuration. "

I'm trying to configure the serial console and turn up the boot, and i'll send you more infomation if I get it, because is still hanging up.
Thanks in advance.
Marcela

2010/10/29 Bruce Edge <bruce.edge@xxxxxxxxx>
2010/10/29 Marcela Castro León <mcastrol@xxxxxxxxx>:

> Hello
> I'm installing XEN 4.0.1 onubuntu 10.04, My machine has 2 processor intel
> core duo E8400 3GHz.
> I'm following this procedure.
> http://www.gossamer-threads.com/lists/xen/users/185290
> and i've checked some information on this page
> http://bderzhavets.wordpress.com/2010/04/24/set-up-ubuntu-10-04-server-pv-domu-at-xen-4-0-dom0-pvops-2-6-32-10-kernel-dom0-on-top-of-ubuntu-10-04-server/
>
> The system doesn't boot, but afetr choose the option on the boot menu,
> appears these messages from XEN 4.0.1:
> (XEN) command line...
> (XEN) Video Information
> ...
> (XEN) Disk information
> (XEN) ...
> (XEN) ...
> (XEN) dom0 kernel specified check boot loader configuration-
> This is the last sentence, and then the system hangs up.
> Can anyone say me what would happend?

Can you ping / ssh into it from another system?

Can you attach a serial console and turn up the xen boot debug
messages (see links below)?

Post your grub.cfg entry.

Try this link for common problems:

http://wiki.xensource.com/xenwiki/XenDebugging
http://wiki.xensource.com/xenwiki/XenCommonProblems
http://wiki.xensource.com/xenwiki/XenFaq

-Bruce

> Thank you very much.
> Regards.
> Marcela
>
>
>

> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users