[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] domU kernel.org kernel


  • To: Micah Anderson <micah@xxxxxxxxxx>
  • From: Olivier Hanesse <olivier.hanesse@xxxxxxxxx>
  • Date: Thu, 11 Nov 2010 12:39:13 +0100
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Thu, 11 Nov 2010 03:40:54 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=GlXhYlCHOQrbet7KOEVTE4RZ/yVSmpsPuTiZimZnIrB4KpVZV5fM5XImbGOii0gMk4 b+xV/8j61HEM6JFIf7hXQh+ADicoomUki5vZIvRhjjktVoS8WxD6qcj10CamIoKjqw/9 v22Cy+R2P1hM/hYoNPytSUoFG8rUQL2754lhE=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello,

You should try with a 2.6.32 pvops dom0 and with xen 4.
It can't work with xen 3.2 and a 2.6.26 kernel

Regards

Olivier


2010/10/25 Micah Anderson <micah@xxxxxxxxxx>

I've been trying to get a kernel.org 2.6.32.24 kernel to work as the
domU kernel, but have had nothing but failures. The Dom0 is running a
Debian stable (lenny) 2.6.26-2-xen-686 and 3.2-1 xen. I would appreciate
some pointers as to what I am missing to make this work.

I took the kernel.org source, made a .config with these options:

CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=8
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_NETXEN_NIC=m
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_HVC_XEN=y
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set

Then I build the kernel with a regular 'make' and 'make
modules_install'.

strip vmlinux -o vmlinux-stripped
gzip vmlinux-stripped -c > vmlinuz

Then I copy the vmlinuz out to the dom0 and setup the xen configuration
for the domU to boot from it, but it fails:

                                  [    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32.24 (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Oct 25 17:27:32 UTC 2010
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000020000000 (usable)
[    0.000000] DMI not present or invalid.
[    0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000
[    0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[    0.000000] Node: 0, start_pfn: 0, end_pfn: 20000
[    0.000000] Reserving total of 600 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 1f400 max_low_pfn ~ 20000
[    0.000000] max_pfn = 20000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 512MB LOWMEM available.
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004111>] ? xen_mc_flush+0xa2/0x150
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_issue+0x11/0x1f()
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c10373ad>] ? warn_slowpath_common+0x5e/0x8a
[    0.000000]  [<c10373e3>] ? warn_slowpath_null+0xa/0xc
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004111>] ? xen_mc_flush+0xa2/0x150
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_issue+0x11/0x1f()
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c10373ad>] ? warn_slowpath_common+0x5e/0x8a
[    0.000000]  [<c10373e3>] ? warn_slowpath_null+0xa/0xc
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ---[ end trace a7919e7f17c0a726 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004111>] ? xen_mc_flush+0xa2/0x150
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_issue+0x11/0x1f()
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.24 #1
[    0.000000] Call Trace:
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c10373ad>] ? warn_slowpath_common+0x5e/0x8a
[    0.000000]  [<c10373e3>] ? warn_slowpath_null+0xa/0xc
[    0.000000]  [<c1004a6f>] ? xen_mc_issue+0x11/0x1f
[    0.000000]  [<c1005676>] ? xen_set_pmd_hyper+0x59/0x61
[    0.000000]  [<c102502a>] ? set_pmd_pfn+0xc3/0xd5
[    0.000000]  [<c13bb5f5>] ? initmem_init+0x525/0x66b
[    0.000000]  [<c13abf92>] ? setup_arch+0x7e3/0xa17
[    0.000000]  [<c10378e7>] ? release_console_sem+0x174/0x1a2
[    0.000000]  [<c1037da4>] ? vprintk+0x2e7/0x31f
[    0.000000]  [<c13d0020>] ? pci_pcbios_init+0x107/0x20d
[    0.000000]  [<c1005752>] ? __raw_callee_save_xen_irq_disable+0x6/0x8
[    0.000000]  [<c13a85ac>] ? start_kernel+0xb7/0x363
[    0.000000]  [<c13aa1d5>] ? xen_start_kernel+0x515/0x51c
[    0.000000] ---[ end trace a7919e7f17c0a727 ]---
[    0.000000]   mapped low ram: 0 - 20000000
[    0.000000]   low ram: 0 - 20000000
[    0.000000]   node 0 low ram: 00000000 - 20000000
[    0.000000]   node 0 bootmap 00002000 - 00006000
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 0020000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0001666000 - 0001674000]   XEN PAGETABLES ==> [0001666000 - 0001674000]
[    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #4 [0001000000 - 00014bd2e4]    TEXT DATA BSS ==> [0001000000 - 00014bd2e4]
[    0.000000]   #5 [00015e3000 - 0001666000]   XEN START INFO ==> [00015e3000 - 0001666000]
[    0.000000]   #6 [0000100000 - 00001f3000]          PGTABLE ==> [0000100000 - 00001f3000]
[    0.000000]   #7 [001fa00000 - 0020000000]          KVA RAM ==> [001fa00000 - 0020000000]
[    0.000000]   #8 [001f400000 - 001fa00000]           KVA PG ==> [001f400000 - 001fa00000]
[    0.000000]   #9 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00020000
[    0.000000]   HighMem  0x00020000 -> 0x00020000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x0001fa00
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 3.2-1
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:8
[    0.000000] PERCPU: Embedded 15 pages/cpu @c14c3000 s37784 r0 d23656 u65536
[    0.000000] pcpu-alloc: s37784 r0 d23656 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128428
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda2 ro
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 504704k/524288k available (2486k kernel code, 13052k reserved, 1256k data, 372k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xf5556000 - 0xf57ff000   (2724 kB)
[    0.000000]     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf4ffe000   ( 327 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]       .init : 0xc13a8000 - 0xc1405000   ( 372 kB)
[    0.000000]       .data : 0xc126d8a1 - 0xc13a7934   (1256 kB)
[    0.000000]       .text : 0xc1000000 - 0xc126d8a1   (2486 kB)
[    0.000000] SLUB: Genslabs=14, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [hvc0] enabled
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 3189.366 MHz processor.
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6378.73 BogoMIPS (lpj=12757464)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: L3 cache: 1024K
[    0.004000] CPU: Unsupported number of siblings 2
[    0.004000] Performance Events: no PMU driver, software events only.
[    0.004000] SMP alternatives: switching to UP code
[    0.004000] Freeing SMP alternatives: 14k freed
[    0.005073] Brought up 1 CPUs
[    0.005177] BUG: unable to handle kernel NULL pointer dereference at (null)
[    0.005218] IP: [<c1030956>] cpu_attach_domain+0x66/0x15f
[    0.005261] *pdpt = 000000000140b001 *pde = 0000000000000000
[    0.005295] Oops: 0000 [#1] SMP
[    0.005320] last sysfs file:
[    0.005334] Modules linked in:
[    0.005353]
[    0.005369] Pid: 1, comm: swapper Tainted: G        W  (2.6.32.24 #1)
[    0.005390] EIP: 0061:[<c1030956>] EFLAGS: 00010206 CPU: 0
[    0.005414] EIP is at cpu_attach_domain+0x66/0x15f
[    0.005447] EAX: 00000000 EBX: c14c749c ECX: 00000000 EDX: 0000042f
[    0.005483] ESI: c14c7430 EDI: c14c7358 EBP: 0000102f ESP: df035f34
[    0.005503]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: e021
[    0.005523] Process swapper (pid: 1, ti=df034000 task=df030000 task.ti=df034000)
[    0.005542] Stack:
[    0.005554]  00000000 df044000 c14cbea0 0000042f 00000008 00000000 c13ff358 00000008
[    0.005608] <0> 00000020 c103113b c13ff4fc c13ff49c 00000000 df001058 c1005768 df001058
[    0.005672] <0> 00000020 00000001 c1005dbc 00000000 00000004 00000000 00000001 00000001
[    0.005743] Call Trace:
[    0.005768]  [<c103113b>] ? __build_sched_domains+0x6ec/0x74d
[    0.005798]  [<c1005768>] ? xen_force_evtchn_callback+0xc/0x10
[    0.005828]  [<c1005dbc>] ? check_events+0x8/0xc
[    0.005858]  [<c13bc138>] ? sched_init_smp+0xc2/0x161
[    0.005883]  [<c13a82a1>] ? kernel_init+0xd0/0x15d
[    0.005905]  [<c13a81d1>] ? kernel_init+0x0/0x15d
[    0.005932]  [<c1008d47>] ? kernel_thread_helper+0x7/0x10
[    0.005950] Code: eb 73 8b 1e 85 db 74 71 8b 43 38 8b 6e 38 89 44 24 0c 8b 43 5c e8 83 91 11 00 48 74 4b 8b 53 38 f7 c2 8f 02 00 00 74 0b 8b 43 08 <3b> 00 0f 85 c5 00 00 00 80 e2 20 0f 85 bc 00 00 00 eb 2a 8b 43
[    0.006308] EIP: [<c1030956>] cpu_attach_domain+0x66/0x15f SS:ESP e021:df035f34
[    0.006339] CR2: 0000000000000000
[    0.006356] ---[ end trace a7919e7f17c0a728 ]---
[    0.006390] Kernel panic - not syncing: Attempted to kill init!
[    0.006410] Pid: 1, comm: swapper Tainted: G      D W  2.6.32.24 #1
[    0.006427] Call Trace:
[    0.006445]  [<c12682c5>] ? panic+0x38/0xe4
[    0.006468]  [<c1039f82>] ? do_exit+0x5a/0x5e6
[    0.006493]  [<c126837f>] ? printk+0xe/0x17
[    0.006512]  [<c126a848>] ? oops_end+0x98/0x9d
[    0.006532]  [<c1020f60>] ? no_context+0x134/0x13d
[    0.006551]  [<c102107e>] ? __bad_area_nosemaphore+0x115/0x11d
[    0.006574]  [<c1094202>] ? __alloc_pages_nodemask+0xef/0x4d1
[    0.006594]  [<c1005768>] ? xen_force_evtchn_callback+0xc/0x10
[    0.008000]  [<c1005dbc>] ? check_events+0x8/0xc
[    0.008000]  [<c1005768>] ? xen_force_evtchn_callback+0xc/0x10
[    0.008000]  [<c1005dbc>] ? check_events+0x8/0xc
[    0.008000]  [<c1005db3>] ? xen_restore_fl_direct_end+0x0/0x1
[    0.008000]  [<c126b873>] ? do_page_fault+0x115/0x307
[    0.008000]  [<c126b75e>] ? do_page_fault+0x0/0x307
[    0.008000]  [<c1021090>] ? bad_area_nosemaphore+0xa/0xc
[    0.008000]  [<c1269f43>] ? error_code+0x73/0x78
[    0.008000]  [<c102007b>] ? get_call_destination+0x55/0x83
[    0.008000]  [<c1030956>] ? cpu_attach_domain+0x66/0x15f
[    0.008000]  [<c103113b>] ? __build_sched_domains+0x6ec/0x74d
[    0.008000]  [<c1005768>] ? xen_force_evtchn_callback+0xc/0x10
[    0.008000]  [<c1005dbc>] ? check_events+0x8/0xc
[    0.008000]  [<c13bc138>] ? sched_init_smp+0xc2/0x161
[    0.008000]  [<c13a82a1>] ? kernel_init+0xd0/0x15d
[    0.008000]  [<c13a81d1>] ? kernel_init+0x0/0x15d
[    0.008000]  [<c1008d47>] ? kernel_thread_helper+0x7/0x10


--


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.