[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Dom0-Domu Communication

  • To: Digimer <linux@xxxxxxxxxxx>
  • From: David Cemin <davidcemin@xxxxxxxxx>
  • Date: Mon, 22 Nov 2010 15:52:41 -0200
  • Cc: xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Mon, 22 Nov 2010 09:53:42 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=guZxagxulLSajHz5a8+7L3IlYilXWyZNPWQGEg0ZrrVMEngvCdxWCWmqdgN7Keh3ur zZ4OZKjiN5ix+O/i1k3j/X63C4MG7LwqVFFC76mJUJ4daNjRziwI3g9LAVi98AlXoHAM HNCZuXXcHeSY6PqIA0SiqCjG45ngw7POlLz7A=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Yes, I´ve done that:

root@xen-hypervisor:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:3e:63:29:ab  

But it appears that the link to dom1 inside dom0 is wrong:

vif1.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff  
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link

Am I right? If yes, it is configurable through xend-config.sxp ?

Thank you!

best regards, 


2010/11/22 Digimer <linux@xxxxxxxxxxx>
On 11/22/2010 12:41 PM, David Cemin wrote:
And I am having the same mac on peth0 and eth0 .. where do I configure
it .. inside xend-config.sxp ?

Thank you again

peth0 and eth0 do share a MAC address, that is okay (as they are one in the same). The domU machines though all need unique MAC addresses. You should use '00:16:3e:xx:xx:xx'.

E-Mail: digimer@xxxxxxxxxxx
AN!Whitepapers: http://alteeve.com
Node Assassin:  http://nodeassassin.org

David Cemin
mobile: +55 51 93523097
home:   +55 51 32763785
email: davidcemin@xxxxxxxxx
Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.