[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] HVM-guest doesn't boot from virtual disk
Am 07.12.2010 18:19, schrieb Todd Deshane: > On Tue, Dec 7, 2010 at 7:31 AM, Alexander Wendland <nospam@xxxxxxxxx> wrote: >> On Tue, 7 Dec 2010 00:44:38 -0500, Todd Deshane wrote: >>> >>> On Mon, Dec 6, 2010 at 10:32 AM, Alexander Wendland <nospam@xxxxxxxxx> >>> wrote: >>>> >>>> Hello, >>>> >>>> I've installed a HVM-guest on xen 4.0.1 with following disk-config: >>>> >>>> disk = ['phy:/dev/vg_virtual/test,sda,w','file:/root/foo.iso,hda:cdrom,r' >>>> ] >>>> >>>> "/dev/vg_virtual/test" is a logical volum (LVM2), the iso is an >>>> image-file. >>>> >>>> >>>> The installation of the Linux-system (booting from cd, setup,...) was >>>> finished sucessful and the maschine will be restarted. >>>> >>>> The rebooted system doesn't boot from the virtual harddisk and is booting >>>> from "cd" again. >>>> >>>> >>>> >>>> After disabling cd-booting via boot="c" and restart the maschine says: >>>> >>>> Booting from Harddisk... >>>> Boot from Harddisk failed: could not read the boot disk >>>> >>>> No bootable device found. >>>> >>>> >>>> >>>> I've tried different distributions, also installing in an image-file with >>>> the same result. >>>> >>>> There are data on the disk. I cann see the partitions and can mount it >>>> (extract via kapartx). >>>> >>>> Booting the vm from cd is working. The rescue-system can mount the >>>> partitionsand I cann work with it. >>>> Booting from "harddisk" will be failed. >>>> >>>> What is wrong? Who can help? >>>> >>> >>> Could you post your guest config file to the list? >>> >>> Thanks, >>> Todd >> >> Hello, >> >> here is it: >> >> kernel = "hvmloader" >> builder='hvm' >> memory = 256 >> name = "testhvm" >> vcpus=1 >> pae=0 >> acpi=1 >> apic=1 >> vif = ['mac=00:16:33:AA:D2:9B, bridge=extern','mac=00:16:33:AA:D2:7B, >> bridge=dmz','mac=00:16:33:AA:D2:8C, bridge=intern'] >> disk = ['phy:/dev/vg_virtual/test,sda,w','file:/root/foo.iso,hda:cdrom,r' ] > > Try changing this disk line to: > > disk = ['phy:/dev/vg_virtual/test,hda,w','file:/root/foo.iso,hdb:cdrom,r' ] > > The boot="c" refers to MS-DOS style disk naming. So, disk order may in > fact matter. > > Hope that helps, > > Thanks, > Todd > > Hallo Todd, thank you for your input. This was the solution. Regards, Alex _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |