[Xen-users] dom0 does not boot when VT-d is enabled on ASRock X58 Extreme

[Caz Yokoyama <cazyokoyama@xxxxxxxxx>]

Hello,

Has anyone found dom0 does not boot when VT-d is enabled on ASRock X58 Extreme? I am running SLES 11.1 which has X4.0.0_21091_04-0 .2.6.and kernel 2.6.32.12-0.7-xen. Xen does not boot when VT-d is enabled as following table. Other combinations are fine. For example, dom0 kernel, vmlinuz-2.6.32.12-0.7-default boot fine even when VT-d is enabled.

 

VT-d    xen    boot

Enb     yes    no

Dis      yes    yes

Enb     no      yes

 

Has anyone else had this symptom? Here is console log.

 

__  __         

 \ \/ /___ _ __ 

  \  // _ \ '_ \

  /  \  __/ | | |

 /_/\_\___|_| |_|

                

  _  _    ___   ___     ____  _  ___   ___  _     ___  _  _       ___   ____   

 | || |  / _ \ / _ \   |___ \/ |/ _ \ / _ \/ |   / _ \| || |     / _ \ |___ \  

 | || |_| | | | | | |    __) | | | | | (_) | |  | | | | || |_ __| | | |  __) | 

 |__   _| |_| | |_| |   / __/| | |_| |\__, | |  | |_| |__   _|__| |_| | / __/ _

    |_|(_)___(_)___/___|_____|_|\___/   /_/|_|___\___/   |_|     \___(_)_____(_)

                  |_____|                   |_____|                            

   __  

  / /_ 

 | '_ \

 | (_) |

  \___/

       

(XEN) Xen version 4.0.0_21091_04-0.2.6 (abuild@) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) Thu May 20 11:44:41 UTC 2010

(XEN) Latest ChangeSet: 21091

(XEN) Command line: vga=mode-0x375 com1=115200,8n1 console=vga,com1L gdb=com1H

(XEN) Video information:

(XEN)  VGA is graphics mode 1600x1200, 16 bpp

(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds

(XEN)  EDID info not retrieved because of reasons unknown

(XEN) Disc information:

(XEN)  Found 1 MBR signatures

(XEN)  Found 1 EDD information structures

(XEN0000000000a0000 (reserved)

(XEN)  00000000000e4000 - 0000000000100000 (reserved)

(XEN)  0000000000100000 - 00000000bbe80000 (usable)

(XEN)  00000000bbe80000 - 00000000bbe90000 (ACPI data)

(XEN)  00000000bbe90000 - 00000000bbed0000 (ACPI NVS)

(XEN)  00000000bbed0000 - 00000000bbee0000 (reserved)

(XEN)  00000000bbeeb800 - 00000000bc000000 (reserved)

(XEN)  00000000fee00000 - 00000000fee01000 (reserved)

(XEN)  00000000ffb00000 - 0000000100000000 (reserved)

(XEN)  0000000100000000 - 00000001c4000000 (usable)

(XEN) ACPI: RSDP 000FA1F0, 0014 (r0 ACPIAM)

(XEN) ACPI: RSDT BBE80000, 0044 (r1 111510 RSDT1542 20101115 MSFT       97)

(XEN) ACPI: FACP BBE80200, 0084 (r1 A_M_I  OEMFACP  12000601 MSFT       97)

(XEN) ACPI: DSDT BBE80480, 7129 (r1  AS244 AS244263      263 INTL 20051117)

(XEN) ACPI: FACS BBE90000, 0040

(XEN) ACPI: APIC BBE80390, 00AC (r1 111510 APIC1542 20101115 MSFT       97)

(XEN) ACPI: MCFG BBE80440, 003C (r1 111510 OEMMCFG  20101115 MSFT       97)

(XEN) ACPI: OEMB BBE90040, 0073 (r1 111510 OEMB1542 20101115 MSFT       97)

(XEN) ACPI: AAFT BBE8A480, 0027 (r1 111510 OEMAAFT  20101115 MSFT       97)

(XEN) ACPI: HPET BBE8A4B0, 0038 (r1 111510 OEMHPET  20101115 MSFT       97)

(XEN) ACPI: DMAR BBE900C0, 0130 (r1    AMI  OEMDMAR        1 MSFT       97)

(XEN) ACPI: SSDT BBE92430, 0363 (r1 DpgPmm    CpuPm       12 INTL 20051117)

(XEN) System RAM: 6112MB (6259636kB)

(XEN) Domain heap initialised

(XEN) Processor #0 7:10 APIC version 21

(XEN) Processor #2 7:10 APIC version 21

(XEN) Processor #4 7:10 APIC version 21

(XEN) Processor #6 7:10 APIC version 21

(XEN) Processor #1 7:10 APIC version 21

(XEN) Processor #3 7:10 APIC version 21

(XEN) Processor #5 7:10 APIC version 21

(XEN) Processor #7 7:10 APIC version 21

(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs

(XEN) [VT-D]dmar.c:504:   RMRR address range not in reserved memory base = bbeeb800 end = bbefffff; iommu_inclusive_mapping=1 parameter may be needed.

(XEN) Using scheduler: SMP Credit Scheduler (credit)

(XEN) Detected 3135.481 MHz processor.

(XEN) Initing memory sharing.

(XEN) VMX: Supported advanced features:

(XEN)  - APIC MMIO access virtualisation

(XEN)  - APIC TPR shadow

(XEN)  - Extended Page Tables (EPT)

(XEN)  - Virtual-Processor Identifiers (VPID)

(XEN)  - Virtual NMI

(XEN)  - MSR direct-access bitmap

(XEN) HVM: ASIDs enabled.

(XEN) HVM: VMX enabled

(XEN) HVM: Hardware Assisted Paging detected.

(XEN) Intel VT-d Snoop Control supported.

(XEN) Intel VT-d DMA Passthrough not supported.

(XEN) Intel VT-d Queued Invalidation supported.

(XEN) Intel VT-d Interrupt Remapping supported.

(XEN) I/O virtualisation enabled

(XEN) I/O virtualisation for PV guests disabled

(XEN) Total of 8 processors activated.

(XEN) ENABLING IO-APIC IRQs

(XEN)  -> Using old ACK method

(XEN) TSC is reliable, synchronization unnecessary

(XEN) Platform timer is 14.318MHz HPET

ÿ(XEN) Allocated console ring of 16 KiB.

(XEN) Brought up 8 CPUs

(XEN) Created cpupool 0 with scheduler SMP Credit Scheduler (credit)

(XEN) *** LOADING DOMAIN 0 ***

(XEN)  Xen  kernel: 64-bit, lsb, compat32

(XEN)  Dom0 kernel: 64-bit, lsb, paddr 0x2000 -> 0x765000

(XEN) PHYSICAL MEMORY ARRANGEMENT:

(XEN)  Dom0 alloc.:   000000013c000000->000000013e000000 (1507875 pages to be allocated)

(XEN) VIRTUAL MEMORY ARRANGEMENT:

(XEN)  Loaded kernel: ffffffff80002000->ffffffff80765000

(XEN)  Init. ramdisk: ffffffff80765000->ffffffff815b4c00

(XEN)  Phys-Mach map: ffffea0000000000->ffffea0000b91118

(XEN)  Start info:    ffffffff815b5000->ffffffff815b54b4

(XEN)  Page tables:   ffffffff815b6000->ffffffff815c5000

(XEN)  Boot stack:    ffffffff815c5000->ffffffff815c6000

(XEN)  TOTAL:         ffffffff80000000->ffffffff81800000

(XEN)  ENTRY ADDRESS: ffffffff80002000

(XEN) Dom0 has maximum 8 VCPUs

(XEN) Scrubbing Free RAM: .done.

(XEN) Xen trace buffers: disabled

(XEN) Std. Loglevel: Errors and warnings

(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)

(XEN) Xen is relinquishing VGA console.

(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)

(XEN) Freed 184kB init memory.

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.32.12-0.7-xen (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2010-05-20 11:14:20 +0200

[    0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x375

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   Centaur CentaurHauls

[    1.524364] Xen-provided machine memory map:

[    1.524366]  BIOS: 0000000000000000 - 0000000000097800 (usable)

[    1.524368]  BIOS: 0000000000097800 - 00000000000a0000 (reserved)

[    1.524369]  BIOS: 00000000000e4000 - 0000000000100000 (reserved)

[    1.524370]  BIOS: 0000000000100000 - 00000000bbe80000 (usable)

[    1.524371]  BIOS: 00000000bbe80000 - 00000000bbe90000 (ACPI data)

[    1.524373]  BIOS: 00000000bbe90000 - 00000000bbed0000 (ACPI NVS)

[    1.524374]  BIOS: 00000000bbed0000 - 00000000bbee0000 (reserved)

[    1.524375]  BIOS: 00000000bbeeb800 - 00000000bc000000 (reserved)

[    1.524376]  BIOS: 00000000fec00000 - 00000000fec01000 (reserved)

[    1.524378]  BIOS: 00000000fee00000 - 00000000fee01000 (reserved)

[    1.524379]  BIOS: 00000000ffb00000 - 0000000100000000 (reserved)

[    1.524380]  BIOS: 0000000100000000 - 00000001c4000000 (usable)

[    1.524381] Xen-provided physical RAM map:

[    1.524382]  Xen: 0000000000000000 - 0000000172a23000 (usable)

[    1.524472] DMI present.

[    1.524481] last_pfn = 0x172a23 max_arch_pfn = 0x80000000

[    1.524482] last_pfn = 0x100000 max_arch_pfn = 0x80000000

[    1.524484] init_memory_mapping: 0000000000000000-0000000100000000

[    1.648782] init_memory_mapping: 0000000100000000-0000000172a23000

[    1.703563] RAMDISK: 00765000 - 015b4c00

[    1.703601] ACPI: RSDP 00000000000fa1f0 00014 (v00 ACPIAM)

[    1.703608] ACPI: RSDT 00000000bbe80000 00044 (v01 111510 RSDT1542 20101115 MSFT 00000097)

[    1.703613] ACPI: FACP 00000000bbe80200 00084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)

[    1.703619] ACPI: DSDT 00000000bbe80480 07129 (v01  AS244 AS244263 00000263 INTL 20051117)

[    1.703623] ACPI: FACS 00000000bbe90000 00040

[    1.703625] ACPI: APIC 00000000bbe80390 000AC (v01 111510 APIC1542 20101115 MSFT 00000097)

[    1.703629] ACPI: MCFG 00000000bbe80440 0003C (v01 111510 OEMMCFG  20101115 MSFT 00000097)

[    1.703632] ACPI: OEMB 00000000bbe90040 00073 (v01 111510 OEMB1542 20101115 MSFT 00000097)

[    1.703635] ACPI: AAFT 00000000bbe8a480 00027 (v01 111510 OEMAAFT  20101115 MSFT 00000097)

[    1.703639] ACPI: HPET 00000000bbe8a4b0 00038 (v01 111510 OEMHPET  20101115 MSFT 00000097)

[    1.703642] ACPI:      00000000bbe900c0 00130 (v01    AMI  OEMDMAR 00000001 MSFT 00000097)

[    1.703645] ACPI: SSDT 00000000bbe92430 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)

[    1.712410] (7 early reservations) ==> bootmem [0000000000 - 0172223000]

[    1.712411]   #0 [0000765000 - 00015c5000]     Xen provided ==> [0000765000 - 00015c5000]

[    1.712434]   #1 [0000002000 - 00007448a8]    TEXT DATA BSS ==> [0000002000 - 00007448a8]

[    1.712446]   #2 [0002000000 - 0002b95000]          INITP2M ==> [0002000000 - 0002b95000]

[    1.712465]   #3 [0000745000 - 000074512f]              BRK ==> [0000745000 - 000074512f]

[    1.712466]   #4 [00015c5000 - 0001dca000]          PGTABLE ==> [00015c5000 - 0001dca000]

[    1.712480]   #5 [0001dca000 - 0002000000]          PGTABLE ==> [0001dca000 - 0002000000]

[    1.712485]   #6 [0002b95000 - 0002cf7000]          PGTABLE ==> [0002b95000 - 0002cf7000]

[    1.716456] Zone PFN ranges:

[    1.716457]   DMA      0x00000000 -> 0x00001000

[    1.716458]   DMA32    0x00001000 -> 0x00100000

[    1.716459]   Normal   0x00100000 -> 0x00172a23

[    1.716460] Movable zone start PFN for each node

[    1.716461] early_node_map[2] active PFN ranges

[    1.716462]     0: 0x00000000 -> 0x00172223

[    1.716462]     0: 0x00172a23 -> 0x00172a23

[    1.745056] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[    1.745058] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

[    1.745059] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)

[    1.745060] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)

[    1.745061] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)

[    1.745062] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)

[    1.745063] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)

[    1.745064] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)

[    1.745065] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] died)

[    1.745065] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)

[    1.745066] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)

[    1.745067] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)

[    1.745073] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

[    1.745078] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

[    1.745081] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    1.745082] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    1.745090] Using ACPI (MADT) for SMP configuration information

[    1.745123] Allocating PCI resources starting at bc000000 (gap: bc000000:42c00000)

[    1.745125] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1

[    1.745205] PERCPU: Embedded 17 pages/cpu @ffff88000200a000 s40856 r8192 d20584 u69632

[    1.745209] pcpu-alloc: s40856 r8192 d20584 u69632 alloc=17*4096

[    1.745210] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7

[    1.745221] Swapping MFNs for PFN 635 and 2010 (MFN 13c635 and 13e40e)

[    1.745234] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1495311

[    1.745236] Kernel command line: root=/dev/sda2 resume=/dev/sda1 vga=0x375

[    1.745250] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    1.746020] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    1.747448] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    1.759427] allocated 60724600 bytes of page_cgroup

[    1.759429] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    1.778241] Software IO TLB enabled:

[    1.778241]  Aperture:     64 megabytes

[    1.778242]  Address size: 27 bits

[    1.778242]  Kernel range: ffff88000c7e8000 - ffff8800107e8000

[    1.778244] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.791060] Memory: 5796228k/6072460k available (3424k kernel code, 8192k absent, 267288k reserved, 2892k data, 340k init)

[    1.791123] Hierarchical RCU implementation.

[    1.791129] NR_IRQS:6464 nr_irqs:2584

[    1.791202] Xen reported: 3135.480 MHz processor.

[    0.267032] Console: colour dummy device 80x25

[    0.267118] console [tty0] enabled

[    0.267295] console [xvc-1] enabled

[    0.334997] Calibrating delay using timer specific routine.. 6272.63 BogoMIPS (lpj=12545272)

[    0.335002] pid_max: default: 32768 minimum: 301

[    0.335036] Security Framework initialized

[    0.335047] AppArmor: AppArmor initialized

[    0.335062] Mount-cache hash table entries: 256

[    0.335148] Initializing cgroup subsys ns

[    0.335152] Initializing cgroup subsys cpuacct

[    0.335155] Initializing cgroup subsys memory

[    0.335160] Initializing cgroup subsys devices

[    0.335162] Initializing cgroup subsys freezer

[    0.335164] Initializing cgroup subsys net_cls

[    0.335190] mce: CPU supports 9 MCE banks

[    0.335211] SMP alternatives: switching to UP code

[    0.347723] ACPI: Core revision 20090903

[    0.376228] SMP alternatives: switching to SMP code

[    0.389028] Brought up 8 CPUs

[    0.389257] devtmpfs: initialized

[    0.389472] regulator: core version 0.5

[    0.389502] Time:  5:32:58  Date: 12/16/10

[    0.389559] NET: Registered protocol family 16

[    0.389685] ACPI: bus type pci registered

[    0.389731] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[    0.389735] PCI: Not using MMCONFIG.

[    0.389737] PCI: Using configuration type 1 for base access

[    0.390221] bio: create slab <bio-0> at 0

[    0.394411] ACPI: Executed 1 blocks of module-level executable AML code

[    0.399782] ACPI: Interpreter enabled

[    0.399787] ACPI: (supports S0 S1 S5)

[    0.399800] ACPI: Using IOAPIC for interrupt routing

[    0.399841] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[    0.404799] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

[    0.497155] PCI: Using MMCONFIG at e0000000 - efffffff

[    0.505128] ACPI Warning: Incorrect checksum in table [OEMB] - CF, should be CE (20090903/tbutils-314)

[    0.505166] ACPI Warning: Incorrect checksum in table [    ] - 3B, should be 7F (20090903/tbutils-314)

[    0.505267] ACPI: No dock devices found.

[    0.505270] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.505383] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    0.505475] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

[    0.505481] pci 0000:00:00.0: PME# disabled

[    0.505576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[    0.505580] pci 0000:00:01.0: PME# disabled

[    0.505677] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[    0.505682] pci 0000:00:03.0: PME# disabled

[    0.505781] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[    0.505786] pci 0000:00:07.0: PME# disabled

[    0.506527] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[    0.506533] pci 0000:00:1a.7: PME# disabled

[    0.506646] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.506652] pci 0000:00:1b.0: PME# disabled

[    0.506739] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.506744] pci 0000:00:1c.0: PME# disabled

[    0.506834] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    0.506839] pci 0000:00:1c.1: PME# disabled

[    0.506933] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[    0.506938] pci 0000:00:1c.5: PME# disabled

[    0.507373] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[    0.507379] pci 0000:00:1d.7: PME# disabled

[    0.507573] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[    0.507578] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO

[    0.507582] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)

[    0.507589] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)

[    0.507951] pci 0000:00:01.0: PCI bridge to [bus 07-07]

[    0.517523] pci 0000:00:03.0: PCI bridge to [bus 05-05]

[    0.517664] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'

[    0.517730] pci 0000:00:07.0: PCI bridge to [bus 06-06]

[    0.517907] pci 0000:03:00.0: PME# supported from D3hot

[    0.517914] pci 0000:03:00.0: PME# disabled

[    0.517945] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'

[    0.518025] pci 0000:00:1c.0: PCI bridge to [bus 03-03]

[    0.518186] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold

[    0.518193] pci 0000:02:00.0: PME# disabled

[    0.518361] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold

[    0.518367] pci 0000:02:00.1: PME# disabled

[    0.525585] pci 0000:00:1c.1: PCI bridge to [bus 02-02]

[    0.525758] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.525764] pci 0000:01:00.0: PME# disabled

[    0.533546] pci 0000:00:1c.5: PCI bridge to [bus 01-01]

[    0.533622] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)

[    0.540870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)

[    0.540965] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)

[    0.541054] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)

[    0.541146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)

[    0.541238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[    0.541331] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)

[    0.541427] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)

[    0.541520] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)

[    0.541575] xen_mem: Initialising balloon driver.

[    0.541650] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.541657] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=none,locks=none

[    0.541661] vgaarb: loaded

[    0.541704] PCI: Using ACPI for IRQ routing

[    0.541858] NetLabel: Initializing

[    0.541861] NetLabel:  domain hash size = 128

[    0.541862] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.541872] NetLabel:  unlabeled traffic allowed by default

[    0.541883] Switching to clocksource xen

[    0.153167] AppArmor: AppArmor Filesystem Enabled

[    0.153176] pnp: PnP ACPI init

[    0.153183] ACPI: bus type pnp registered

[    0.156886] pnp: PnP ACPI: found 15 devices

[    0.156890] ACPI: ACPI bus type pnp unregistered

[    0.156897] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved

[    0.156900] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved

[    0.156903] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved

[    0.156906] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved

[    0.156908] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved

[    0.156911] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved

[    0.156917] system 00:06: ioport range 0x4d0-0x4d1 has been reserved

[    0.156919] system 00:06: ioport range 0x800-0x87f has been reserved

[    0.156922] system 00:06: ioport range 0x500-0x57f could not be reserved

[    0.156925] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved

[    0.156928] system 00:06: iomem range 0xfed20000-0xfed3ffff has been reserved

[    0.156931] system 00:06: iomem range 0xfed40000-0xfed8ffff has been reserved

[    0.156935] system 00:09: iomem range 0xffc00000-0xffefffff has been reserved

[    0.156939] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved

[    0.156942] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved

[    0.156945] system 00:0a: iomem range 0xfec8a000-0xfec8afff has been reserved

[    0.156949] system 00:0c: ioport range 0xa00-0xa0f has been reserved

[    0.156952] system 00:0c: ioport range 0xa10-0xa1f has been reserved

[    0.156954] system 00:0c: ioport range 0xa20-0xa2f has been reserved

[    0.156957] system 00:0c: ioport range 0xa30-0xa3f has been reserved

[    0.156961] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved

[    0.156965] system 00:0e: iomem range 0x0-0x9ffff could not be reserved

[    0.156968] system 00:0e: iomem range 0xc0000-0xcffff has been reserved

[    0.156971] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved

[    0.156973] system 00:0e: iomem range 0x100000-0xbbffffff could not be reserved

[    0.156977] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved

[    0.157137] pci 0000:00:01.0: PCI bridge, secondary bus 0000:07

[    0.157141] pci 0000:00:01.0:   IO window: disabled

[    0.157146] pci 0000:00:01.0:   MEM window: disabled

[    0.157150] pci 0000:00:01.0:   PREFETCH window: disabled

[    0.157158] pci 0000:00:03.0: PCI bridge, secondary bus 0000:05

[    0.157162] pci 0000:00:03.0:   IO window: 0xe000-0xefff

[    0.157167] pci 0000:00:03.0:   MEM window: 0xf8f00000-0xf8ffffff

[    0.157172] pci 0000:00:03.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff

[    0.157180] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06

[    0.157182] pci 0000:00:07.0:   IO window: disabled

[    0.157188] pci 0000:00:07.0:   MEM window: 0xf9000000-0xfbefffff

[    0.157192] pci 0000:00:07.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff

[    0.157200] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03

[    0.157204] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff

[    0.157210] pci 0000:000:   MEM window: 0xf8e00000-0xf8efffff

[    0.157215] pci 0000:00:1c.0:   PREFETCH window: 0x000000bc000000-0x000000bc1fffff

[    0.157224] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02

[    0.157256] pci 0000:00:1c.1:   IO window: 0xc000-0xcfff

[    0.157262] pci 0000:00:1c.1:   MEM window: 0xf8d00000-0xf8dfffff

[    0.157267] pci 0000:00:1c.1:   PREFETCH window: 0x000000bc200000-0x000000bc3fffff

[    0.157276] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01

[    0.157279] pci 0000:00:1c.5:   IO window: 0xb000-0xbfff

[    0.157286] pci 0000:00:1c.5:   MEM window: 0xf8c00000-0xf8cfffff

[    0.157291] pci 0000:00:1c.5:   PREFETCH window: 0x000000bff00000-0x000000bfffffff

[    0.157299] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04

[    0.157301] pci 0000:00:1e.0:   IO window: disabled

[    0.157307] pci 0000:00:1e.0:   MEM window: disabled

[    0.157312] pci 0000:00:1e.0:   PREFETCH window: disabled

[    0.157385] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[    0.157424] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[    0.157438] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[    0.157541] NET: Registered protocol family 2

[    0.157608] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.157931] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[    0.158367] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.158468] TCP: Hash tables configured (established 262144 bind 65536)

[    0.158471] TCP reno registered

[    0.158554] NET: Registered protocol family 1

[    0.158988] Unpacking initramfs...

[    0.164955] Freeing initrd memory: 14655k freed

[    0.166882] audit: initializing netlink socket (disabled)

[    0.166894] type=2000 audit(1292477579.075:1): initialized

[    0.171900] VFS: Disk quotas dquot_6.5.2

[    0.171928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.171969] msgmni has been set to 2968

[    0.172374] alg: No test for stdrng (krng)

[    0.172201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

[    0.172205] io scheduler noop registered

[    0.172207] io scheduler anticipatory registered

[    0.172209] io scheduler deadline registered

[    0.172231] io scheduler cfq registered (default)

[    0.173336] pci-stub: invalid id string ""

[    0.176012] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 7500k, total 16384k

[    0.176016] vesafb: mode is 1600x1200x16, linelength=3200, pages=0

[    0.176019] vesafb: scrolling: redraw

[    0.176021] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[    0.176089] bootsplash 3.1.6-2004/03/31: looking for picture...

[    0.176090] bootsplash: silentjpeg size 79881 bytes

[    0.192506] bootsplash: ...found (1600x1200, 42941 bytes, v3).

[    0.315561] Console: switching to colour frame buffer device 196x71

[    0.422561] fb0: VESA VGA frame buffer device

[    0.423486] Non-volatile memory driver v1.3

[    0.423874] Xen virtual console successfully installed as xvc0

[    0.424362] Event-channel device installed.

[    0.424722] Fixed MDIO Bus: probed

[    0.425027] PNP: No PS/2 controller found. Probing ports directly.

[    0.814970] serio: i8042 KBD port at 0x60,0x64 irq 1

[    0.815381] serio: i8042 AUX port at 0x60,0x64 irq 12

[    0.815837] mice: PS/2 mouse device common for all mice

[    0.816495] TCP cubic registered

[    0.816808] registered taskstats version 1

[    0.817820] PCI IO multiplexer device installed.

[    0.818224]   Magic number: 6:245:517

[    0.818642] Freeing unused kernel memory: 340k freed

[    0.819104] Write protecting the kernel read-only data: 5716k

[    0.485651] SCSI subsystem initialized

[    0.495508] pata_via 0000:02:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[    0.496251] scsi0 : pata_via

[    0.496564] scsi1 : pata_via

[    0.496963] ata1: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17

[    0.497550] ata2: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17

[    1.049741] ata1.00: ATAPI: PIONEER DVD-RW  DVR-112D, 1.15, max UDMA/66

[    1.050294] ata1.00: limited to UDMA/33 due to 40-wire cable

[    1.065764] ata1.00: configured for UDMA/33

[    1.078374] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-112D 1.15 PQ: 0 ANSI: 5

[    0.854708] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[    0.868497] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode

[    0.869172] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part

[    0.869891] scsi2 : ahci

[    0.870136] ata3: SATA max UDMA/133 abar m8192@0xf8efe000 port 0xf8efe100 irq 16

[    1.188477] ata3: SATA link down (SStatus 0 SControl 300)

[    1.207211] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[    1.207802] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[    1.208418] scsi3 : ata_piix

[    1.208704] scsi4 : ata_piix

[    1.209762] ata4: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19

[    1.210352] ata5: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19

[    1.210961] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[    1.211552] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[    1.212122] scsi5 : ata_piix

[    1.212402] scsi6 : ata_piix

[    1.213349] ata6: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19

[    1.213938] ata7: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19

[    1.547566] ata6: SATA link down (SStatus 0 SControl 300)

[    1.558535] ata7: SATA link down (SStatus 0 SControl 300)

[    2.248254] ata5.00: SATA link down (SStatus 0 SControl 300)

[    2.264873] ata5.01: SATA link down (SStatus 0 SControl 300)

[    2.028522] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.045557] ata4.01: SATA link down (SStatus 0 SControl 300)

[    2.504060] ata4.00: ATA-7: MAXTOR STM3320620AS, 3.AAE, max UDMA/133

[    2.521739] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)

[    2.585894] ata4.00: configured for UDMA/133

[    2.604188] scsi 3:0:0:0: Direct-Access     ATA      MAXTOR STM332062 3.AA PQ: 0 ANSI: 5

[    2.256690] Uniform Multi-Platform E-IDE driver

[    2.283790] ACPI: SSDT 00000000bbe901f0 0223C (v01 DpgPmm  P001Ist 00000011 INTL 20051117)

[    2.304508] No available Cx info for cpu 2

[    2.325068] No available Cx info for cpu 3

[    2.345538] N

[    2.366014] No available Cx info for cpu 5

[    2.386534] No available Cx info for cpu 6

[    2.407086] No available Cx info for cpu 7

[    2.427684] No available Cx info for cpu 8

[    2.448309] No available Cx info for cpu 9

[    2.468733] No available Cx info for cpu 10

[    2.489207] No available Cx info for cpu 11

[    2.509724] No available Cx info for cpu 12

[    2.530282] No available Cx info for cpu 13

[    2.550885] No available Cx info for cpu 14

[    2.571514] No available Cx info for cpu 15

[    2.591779] No available Cx info for cpu 16

[    2.641029] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

[    2.671015] netfront: Initialising virtual ethernet driver.

[    2.722080] udevd version 128 started

[    3.209708] usbcore: registered new interface driver usbfs

[    2.833610] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[    2.833648] sd 3:0:0:0: [sda] Write Protect is off

[    2.833667] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.833765]  sda: sda1

[    3.294089] usbcore: registered new interface driver hub

[    2.905522] usbcore: registered new device driver usb

[    2.906369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.906425] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[    2.906452] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[    2.906467] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1

[    2.906508] ehci_hcd 0000:00:1a.7: debug port 1

[    2.910363] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8bf6000

[    2.924276] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[    2.924289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.924291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.924292] usb usb1: Product: EHCI Host Controller

[    2.924292] usb usb1: Manufacturer: Linux 2.6.32.12-0.7-xen ehci_hcd

[    2.924293] usb usb1: SerialNumber: 0000:00:1a.7

[    2.924335] usb usb1: configuration #1 chosen from 1 choice

[    2.924350] hub 1-0:1.0: USB hub found

[    2.924362] hub 1-0:1.0: 6 ports detected

[    2.924431] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[    2.924453] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[    2.924458] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2

[    2.924494] ehci_hcd 0000:00:1d.7: debug port 1

[    2.928356] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8bfc000

[    2.940274] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[    2.940286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    2.940287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.940288] usb usb2: Product: EHCI Host Controller

[    2.940289] usb usb2: Manufacturer: Linux 2.6.32.12-0.7-xen ehci_hcd

[    2.940290] usb usb2: SerialNumber: 0000:00:1d.7

[    2.940325] usb usb2: configuration #1 chosen from 1 choice

[    2.940338] hub 2-0:1.0: USB hub found

[    2.940350] hub 2-0:1.0: 6 ports detected

[    3.034576] uhci_hcd: USB Universal Host Controller Interface driver

[    3.586987]  sda2

[    3.587598] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[    3.587608] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[    3.587615] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[    3.587641] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008400

[    3.587708] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    3.587709] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.587710] usb usb3: Product: UHCI Host Controller

[    3.587711] usb usb3: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.587712] usb usb3: SerialNumber: 0000:00:1a.0

[    3.587751] usb usb3: configuration #1 chosen from 1 choice

[    3.587766] hub 3-0:1.0: USB hub found

[    3.587774] hub 3-0:1.0: 2 ports detected

[    3.587840] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[    3.587848] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[    3.587853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[    3.587923] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480

[    3.587957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[    3.587958] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.587960] usb usb4: Product: UHCI Host Controller

[    3.587961] usb usb4: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.587961] usb usb4: SerialNumber: 0000:00:1a.1

[    3.587998] usb usb4: configuration #1 chosen from 1 choice

[    3.588015] hub 4-0:1.0: USB hub found

[    3.588024] hub 4-0:1.0: 2 ports detected

[    3.588061] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19

[    3.588068] uhci_hcd 0000:00:1a.2: UHCI Host Controller

[    3.588074] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5

[    3.588099] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008800

[    3.588133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[    3.588134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.588135] usb usb5: Product: UHCI Host Controller

[    3.588136] usb usb5: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.588137] usb usb5: SerialNumber: 0000:00:1a.2

[    3.588172] usb usb5: configuration #1 chosen from 1 choice

[    3.588185] hub 5-0:1.0: USB hub found

[    3.588193] hub 5-0:1.0: 2 ports detected

[    3.588228] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[    3.588235] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[    3.588241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6

[    3.588266] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008880

[    3.588301] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[    3.588302] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.588303] usb usb6: Product: UHCI Host Controller

[    3.588304] usb usb6: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.588310] usb usb6: SerialNumber: 0000:00:1d.0

[    3.588342] usb usb6: configuration #1 chosen from 1 choice

[    3.588355] hub 6-0:1.0: USB hub found

[    3.588364] hub 6-0:1.0: 2 ports detected

[    3.588396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[    3.588404] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[    3.588407] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7

[    3.588433] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00

[    3.588466] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[    3.588468] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.588469] usb usb7: Product: UHCI Host Controller

[    3.588469] usb usb7: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.588470] usb usb7: SerialNumber: 0000:00:1d.1

[    3.588503] usb usb7: configuration #1 chosen from 1 choice

[    3.588518] hub 7-0:1.0: USB hub found

[    3.588529] hub 7-0:1.0: 2 ports detected

[    3.588574] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[    3.588585] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[    3.588591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8

[    3.588621] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009000

[    3.588665] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001

[    3.588667] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.588669] usb usb8: Product: UHCI Host Controller

[    3.588670] usb usb8: Manufacturer: Linux 2.6.32.12-0.7-xen uhci_hcd

[    3.588671] usb usb8: SerialNumber: 0000:00:1d.2

[    3.588720] usb usb8: configuration #1 chosen from 1 choice

[    3.588741] hub 8-0:1.0: USB hub found

[    3.588753] hub 8-0:1.0: 2 ports detected

[    3.608172] sd 3:0:0:0: [sda] Attached SCSI disk

[    5.652177] usb 3-1: new full speed USB device using uhci_hcd and address 2

[    6.193751] usb 3-1: New USB device found, idVendor=0557, idProduct=7000

[    6.220260] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    6.257709] usb 3-1: configuration #1 chosen from 1 choice

[    6.284023] hub 3-1:1.0: USB hub found

[    6.309979] hub 3-1:1.0: 4 ports detected

[    6.013953] kjournald starting.  Commit interval 15 seconds

[    6.014144] EXT3 FS on sda2, internal journal

[    6.014149] EXT3-fs: mounted filesystem with ordered data mode.

[    6.613822] usb 3-1.1: new low speed USB device using uhci_hcd and address 3

[    6.814770] usb 3-1.1: New USB device found, idVendor=0a81, idProduct=0205

[    6.841727] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    6.866430] usb 3-1.1: Product: PS2 to USB Converter

[    6.891045] usb 3-1.1: Manufacturer: CHESEN

[    6.891101] usb 3-1.1: configuration #1 chosen from 1 choice

[    8.056424] udevd version 128 started

[    8.272808] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    8.276484] ACPI: WMI: Mapper loaded

[    8.327885] ACPI: Power Button [PWRB]

[    8.352725] input: PC Speaker as /devices/platform/pcspkr/input/input1

[    8.379206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[    8.405331] ACPI: Power Button [PWRF]

[    9.094274] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

[    9.125265] scsi 0:0:0:0: Attached scsi generic sg0 type 5

[    8.739063] iTCO_vendor_support: vendor-support=0

[    9.178285] sd 3:0:0:0: Attached scsi generic sg1 type 0

[    8.833402] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[    9.222522] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[    9.222524] Uniform CD-ROM driver Revision: 3.20

[    8.933922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05

[    8.960942] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)

[    8.988080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    9.038509] ohci1394 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[    9.090367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    9.092298] rtc_cmos 00:03: RTC can wake from S4

[    9.092350] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[    9.092431] rtc0: alarms up to one month, y3k, 114 bytes nvram

[    9.201456] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[    9.229410] eth0: RTL8168d/8111d at 0xffffc900111dc000, 00:25:22:4c:18:b7, XID 081000c0 IRQ 465

[    9.302291] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8def800-f8deffff]  Max Packet=[2048]  IR/IT contexts=[4/8]

[    9.726427] usbcore: registered new interface driver hiddev

[    9.779273] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3

[    9.812868] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input0

[    9.888261] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input4

[    9.922109] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.1/input1

[    9.953720] usbcore: registered new interface driver usbhid

[    9.985310] usbhid: v2.6:USB HID core driver

[    9.812844] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[   11.044624] ohci1394: fw-host0: Unrecoverable error!

[   11.076663] ohci1394: fw-host0: Async Req Tx Context died: ctrl[00008806] cmdptr[0b17a002]

[   10.880242] ALSA hda_intel.c:687: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000

[   12.328050] ALSA hda_intel.c:1390: Codec #0 probe error; disabling it...

[   13.394596] ALSA hda_intel.c:726: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000

 

 

-caz

 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users