|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Hypervisor hangs on startup
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I managed to get the serial terminal working. This is what I get from the hypervisor: > (XEN) Xen version 4.0.1 (Debian 4.0.1-1) (waldi@xxxxxxxxxx) (gcc version > 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep 3 15:38:12 UTC 2010 > > (XEN) Bootloader: GRUB 1.98+20100804-10 > > > (XEN) Command line: console=com2 > > > (XEN) Video information: > > > (XEN) VGA is text mode 80x25, font 8x16 > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > > > (XEN) EDID info not retrieved because no DDC retrieval method detected > > > (XEN) Disc information: > > > (XEN) Found 1 MBR signatures > > > (XEN) Found 1 EDD information structures > > > (XEN) Xen-e820 RAM map: > > > (XEN) 0000000000000000 - 00000000000a0000 (usable) > > > (XEN) 0000000000100000 - 000000007f679000 (usable) > > > (XEN) 000000007f679000 - 000000007f68f000 (reserved) > > > (XEN) 000000007f68f000 - 000000007f6ce000 (ACPI data) > > > (XEN) 000000007f6ce000 - 0000000080000000 (reserved) > > > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > > > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > > > (XEN) 0000000100000000 - 0000000c80000000 (usable) > > > (XEN) ACPI: RSDP 000F0A90, 0024 (r2 DELL ) > > > (XEN) ACPI: XSDT 000F0B94, 009C (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: FACP 7F6B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: DSDT 7F68F000, 3D5A (r1 DELL PE_SC3 1 INTL 20050624) > > > (XEN) ACPI: FACS 7F6B6000, 0040 > > > (XEN) ACPI: APIC 7F6B3478, 015E (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: SPCR 7F6B35D8, 0050 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: HPET 7F6B362C, 0038 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: DMAR 7F6B3668, 01C0 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: MCFG 7F6B38C4, 003C (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: WD__ 7F6B3904, 0134 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: SLIC 7F6B3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: ERST 7F692EDC, 0270 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: HEST 7F69314C, 03A8 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: BERT 7F692D5C, 0030 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: EINJ 7F692D8C, 0150 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: SRAT 7F6B3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: TCPA 7F6B3F34, 0064 (r2 DELL PE_SC3 1 DELL 1) > > > (XEN) ACPI: SSDT 7F6B7000, 43F4 (r1 INTEL PPM RCM 80000001 INTL 20061109) > > > (XEN) System RAM: 49142MB (50321508kB) > > > (XEN) Domain heap initialised DMA width 32 bits > > > (XEN) Processor #16 7:10 APIC version 21 > > > (XEN) Processor #0 7:10 APIC version 21 > > > (XEN) Processor #18 7:10 APIC version 21 > > > (XEN) Processor #2 7:10 APIC version 21 > > > (XEN) Processor #20 7:10 APIC version 21 > > > (XEN) Processor #4 7:10 APIC version 21 > > > (XEN) Processor #22 7:10 APIC version 21 > > > (XEN) Processor #6 7:10 APIC version 21 > > > (XEN) Processor #17 7:10 APIC version 21 > > > (XEN) Processor #1 7:10 APIC version 21 > > > (XEN) Processor #19 7:10 APIC version 21 > > > (XEN) Processor #3 7:10 APIC version 21 > > > (XEN) Processor #21 7:10 APIC version 21 > > > (XEN) Processor #5 7:10 APIC version 21 > > > (XEN) Processor #23 7:10 APIC version 21 > > > (XEN) Processor #7 7:10 APIC version 21 > > > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > > > (XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > (XEN) Detected 2394.048 MHz processor. > > > (XEN) Initing memory sharing. > > > (XEN) VMX: Supported advanced features: > > > (XEN) - APIC MMIO access virtualisation > > > (XEN) - APIC TPR shadow > > > (XEN) - Extended Page Tables (EPT) > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > (XEN) - Virtual NMI > > > (XEN) - MSR direct-access bitmap > > > (XEN) EPT supports 2MB super page. > > > (XEN) HVM: ASIDs enabled. > > > (XEN) HVM: VMX enabled > > > (XEN) HVM: Hardware Assisted Paging detected. > > > (XEN) Intel VT-d Snoop Control supported. > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > (XEN) Intel VT-d Queued Invalidation supported. > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > (XEN) I/O virtualisation enabled > > > (XEN) - Dom0 mode: Relaxed > > > (XEN) Total of 16 processors activated. > > > (XEN) ENABLING IO-APIC IRQs > > > (XEN) -> Using new ACK method > > > (XEN) TSC is reliable, synchronization unnecessary > > > (XEN) Platform timer is 14.318MHz HPET > > > ï(XEN) Allocated console ring of 32 KiB. > > > (XEN) Brought up 16 CPUs > > > (XEN) *** LOADING DOMAIN 0 *** > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b6000 > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > (XEN) Dom0 alloc.: 0000000c50000000->0000000c60000000 (12345335 pages to > be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff816b6000 > > > (XEN) Init. ramdisk: ffffffff816b6000->ffffffff83064200 > > > (XEN) Phys-Mach map: ffffffff83065000->ffffffff88f14fb8 > > > (XEN) Start info: ffffffff88f15000->ffffffff88f154b4 > > > (XEN) Page tables: ffffffff88f16000->ffffffff88f61000 > > > (XEN) Boot stack: ffffffff88f61000->ffffffff88f62000 > > > (XEN) TOTAL: ffffffff80000000->ffffffff89000000 > > > (XEN) ENTRY ADDRESS: ffffffff81506200 > > > (XEN) Dom0 has maximum 16 VCPUs > > > (XEN) Scrubbing Free RAM: done. > > > (XEN) Xen trace buffers: disabled > > > (XEN) Std. Loglevel: Errors and warnings > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > > (XEN) Freed 176kB init memory. > > > mapping kernel into physical memory > > > Xen: setup ISA identity maps > > > about to get started... > > > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. Nothing but the last line seem suspicious to me. As said, I'll happily provide you debug information, if you tell me what exactly you do need. - -- mit freundlichen GrÃÃen, Arno TÃll, BSc. GnuPG Key-ID: 0x8408D4C4 Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth Web: wavecon.de | Mail + Jabber at@xxxxxxxxxx -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0LPfEACgkQBWM6U4QI1MSILQCfUrEbaaW9Z5WHYunJpjcgCTO2 yKMAn0kGdLHB4I7QyBl/6sohDPsM+A1M =2rdT -----END PGP SIGNATURE----- _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |