|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] (no subject)
On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny wrote: > > Hi Mark, > > 2 main reasons. The secondary reason is that I've had poor luck with > pre-compiled Xen packages (I haven't tried it on this distro, but I wasn't > even able to get the live CD to work), but the primary reason is that I need > to use Xen 4 (need to be able to do guest disk resize without shutting the > guest down) and I prefer to do it on Ubuntu for which there is no Xen 4 > package. The reason I'm here asking about Xen 3 is because I was getting so > frustrated trying to get Xen 4 to compile that I thought perhaps it was too > new and a more mature code base like Xen 3 might compile and install properly > for me. Once I got that to work I was going to take what I had learned and > go back to my original Xen 4 plan, hopefully with knowledge that would help > me get that to work. However, now that I realize I can't get Xen 3 to > compile and work properly on this box either, I've been thinking I have a > hardware compatibility problem which is why I posted to this forum asking for > any tips and tricks people could share on tracking down whether there really > was a hardware compatibility problem here and from there how to fix it. > Primarily this is a learning exercise for me so I can eventually get back to > my original goal. > > If you have any suggestions on how to get there, I'm definitely interested in > hearing your thoughts. I run a load of servers on Debian squeeze, which uses xen 4.0.1 at present and works pretty well (had some issues with vt-d stuff..). Extremely simply setup, you just have to change the order in /etc/grub.d/ to get xen to boot by default. Packages that should give you everything you need: xen-linux-system-2.6.32-5-xen-amd64 xen-qemu-dm-4.0 (this for hvm) Regards, Mark > > Thanks, > > Scott > > > > CC: vchampion@xxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx > From: mark@xxxxxxxxxxxxxxxxxx > Subject: Re: [Xen-users] (no subject) > Date: Sun, 9 Jan 2011 23:18:18 +0000 > To: sawozny@xxxxxxxxxxx > > > > > > On 9 Jan 2011, at 21:11, "Scott A. Wozny" <sawozny@xxxxxxxxxxx> wrote: > > > > > First of all, sorry about the lack of a subject on the email. I'm usually > better about that stuff. > > Anyway, the boot sequence goes by pretty fast, but here is the results of > booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built > per the instructions found at > http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/ > : > > > > > Why are you compiling from source with debian? Just install the > xen-linux-system packages. > > Regards, > Mark > > > > Grub Entry: > root (hd0,0) > kernel /xen-3.4.3.gz > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0 > module /initrd.img-2.6.18.8-xen > > > Boot results: > > > Booting 'Xen 3.4.3 / Debian GNU/Linux, kernel 2.6.18.8-xen' > > > root (hd0,0) > Filesystem type is extfs2, partition type 0x83 > kernel /xen-3.4.3.gz > [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078, > entry=0x100000] > > module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0 > [Multiboot-module @0x298000, 0x7412d8 bytes] > module /initrd.img-2.6.18.8-xen > [Multiboot-module @0x9d (this line displays to varying lengths each time, > but it goes by so fast I can't get the rest of it before the machine reboots) > > > > > A different xen kernel also showed up in my grub that doesn't reboot, but > also doesn't boot properly. Here are the results of that if it helps: > > > Grub entry: > root (hd0,0) > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet > initrd /initrd.img-2.6.18.8-xen > > > Boot results: > > > Booting 'Debian GNU/Linux, kernel 2.6.18.8-xen' > > > root (hd0,0) > Filesystem type is extfs2, partition type 0x83 > kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet > > > Error 13: Invalid or unsupported executable format > > > Press any key to continue... > > Here are the dmesg file contents once I booted back into the original kernel > built as part of the Debian 5.0.7 install (if you can recommend any good > resources on interpreting dmesg output I'd appreciate it; in the meantime > I'll start with Google; also, there was a TV card and modem in the machine > that an earlier version of the dmesg file was complaining about > compatibility; I don't need either so I've pulled them out of the machine and > these are the results of the machine booting without them, but do you think I > should do a full reinstall now that they're gone?): > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1) > (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian > 4.1.2-25)) #1 SMP Thu Nov 25 04:30:55 UTC 2010 > [ 0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) > [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable) > [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 > used > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of > 3200 used > [ 0.000000] max_pfn_mapped = 2293760 > [ 0.000000] init_memory_mapping > [ 0.000000] DMI present. > [ 0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM) > [ 0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT > 97) > [ 0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT > 97) > [ 0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1 8A7G1 8A7G1-C0 4 INTL > 20051117) > [ 0.000000] ACPI: FACS CFFAE000, 0040 > [ 0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT > 97) > [ 0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG 20090717 MSFT > 97) > [ 0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT > 97) > [ 0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT 20090717 MSFT > 97) > [ 0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT > 97) > [ 0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT > 97) > [ 0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS NVHDCP 20090717 MSFT > 97) > [ 0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT > 97) > [ 0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm CpuPm 12 INTL > 20051117) > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000230000000 > [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200 > used > [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of > 3200 used > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 > [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] > [ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46 > [ 0.000000] early res: 0 [0-fff] BIOS data page > [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE > [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS > [ 0.000000] early res: 3 [378c2000-37fef99a] RAMDISK > [ 0.000000] early res: 4 [9bc00-fffff] BIOS reserved > [ 0.000000] early res: 5 [8000-11fff] PGTABLE > [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD -> > [ffff810001200000-ffff810003ffffff] on node 0 > [ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD -> > [ffff81000c000000-ffff8100103fffff] on node 0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 2293760 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0 -> 155 > [ 0.000000] 0: 256 -> 851872 > [ 0.000000] 0: 1048576 -> 2293760 > [ 0.000000] On node 0 totalpages: 2096955 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1256 pages reserved > [ 0.000000] DMA zone: 2683 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 14280 pages used for memmap > [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31 > [ 0.000000] Normal zone: 17024 pages used for memmap > [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] ACPI: IRQ14 used by override. > [ 0.000000] ACPI: IRQ15 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] PM: Registered nosave memory: 000000000009b000 - > 000000000009c000 > [ 0.000000] PM: Registered nosave memory: 000000000009c000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 - > 00000000cffae000 > [ 0.000000] PM: Registered nosave memory: 00000000cffae000 - > 00000000cfff0000 > [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - > 00000000d0000000 > [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - > 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - > 00000000fec01000 > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - > 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - > 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - > 00000000fff00000 > [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - > 0000000100000000 > [ 0.000000] Allocating PCI resources starting at d4000000 (gap: > d0000000:2ec00000) > [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data > [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 2064339 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] TSC calibrated against PM_TIMER > [ 0.000000] time.c: Detected 2333.293 MHz processor. > [ 0.004000] spurious 8259A interrupt: IRQ7. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Checking aperture... > [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000 > [ 0.004000] Memory: 8192680k/9175040k available (2229k kernel code, > 195140k reserved, 1084k data, 392k init) > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.004000] hpet clockevent registered > [ 0.083840] Calibrating delay using timer specific routine.. 4671.46 > BogoMIPS (lpj=9342927) > [ 0.083878] Security Framework initialized > [ 0.083884] SELinux: Disabled at boot. > [ 0.083887] Capability LSM initialized > [ 0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608 > bytes) > [ 0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.090266] Mount-cache hash table entries: 256 > [ 0.090428] Initializing cgroup subsys ns > [ 0.090433] Initializing cgroup subsys cpuacct > [ 0.090436] Initializing cgroup subsys devices > [ 0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.090459] CPU: L2 cache: 2048K > [ 0.090461] CPU 0/0 -> Node 0 > [ 0.090462] CPU: Physical Processor ID: 0 > [ 0.090463] CPU: Processor Core ID: 0 > [ 0.090471] CPU0: Thermal monitoring enabled (TM2) > [ 0.090472] using mwait in idle threads. > [ 0.091391] ACPI: Core revision 20080321 > [ 0.142651] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping > 07 > [ 0.142654] Using local APIC timer interrupts. > [ 0.148009] APIC timer calibration result 20833012 > [ 0.148009] Detected 20.833 MHz APIC timer. > [ 0.148009] Booting processor 1/1 ip 6000 > [ 0.156009] Initializing CPU#1 > [ 0.156009] Calibrating delay using timer specific routine.. 4666.64 > BogoMIPS (lpj=9333287) > [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.156009] CPU: L2 cache: 2048K > [ 0.156009] CPU 1/1 -> Node 0 > [ 0.156009] CPU: Physical Processor ID: 0 > [ 0.156009] CPU: Processor Core ID: 1 > [ 0.156009] CPU1: Thermal monitoring enabled (TM2) > [ 0.236014] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping > 07 > [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.240015] Booting processor 2/2 ip 6000 > [ 0.248015] Initializing CPU#2 > [ 0.248015] Calibrating delay using timer specific routine.. 4666.71 > BogoMIPS (lpj=9333433) > [ 0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.248015] CPU: L2 cache: 2048K > [ 0.248015] CPU 2/2 -> Node 0 > [ 0.248015] CPU: Physical Processor ID: 0 > [ 0.248015] CPU: Processor Core ID: 2 > [ 0.248015] CPU2: Thermal monitoring enabled (TM2) > [ 0.327750] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping > 07 > [ 0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed. > [ 0.332020] Booting processor 3/3 ip 6000 > [ 0.340021] Initializing CPU#3 > [ 0.340021] Calibrating delay using timer specific routine.. 4666.67 > BogoMIPS (lpj=9333345) > [ 0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.340021] CPU: L2 cache: 2048K > [ 0.340021] CPU 3/3 -> Node 0 > [ 0.340021] CPU: Physical Processor ID: 0 > [ 0.340021] CPU: Processor Core ID: 3 > [ 0.340021] CPU3: Thermal monitoring enabled (TM2) > [ 0.419670] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping > 07 > [ 0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed. > [ 0.424026] Brought up 4 CPUs > [ 0.424026] Total of 4 processors activated (18671.49 BogoMIPS). > [ 0.424026] CPU0 attaching sched-domain: > [ 0.424026] domain 0: span 0-1 > [ 0.424026] groups: 0 1 > [ 0.424026] domain 1: span 0-3 > [ 0.424026] groups: 0-1 2-3 > [ 0.424026] domain 2: span 0-3 > [ 0.424026] groups: 0-3 > [ 0.424026] CPU1 attaching sched-domain: > [ 0.424026] domain 0: span 0-1 > [ 0.424026] groups: 1 0 > [ 0.424026] domain 1: span 0-3 > [ 0.424026] groups: 0-1 2-3 > [ 0.424026] domain 2: span 0-3 > [ 0.424026] groups: 0-3 > [ 0.424026] CPU2 attaching sched-domain: > [ 0.424026] domain 0: span 2-3 > [ 0.424026] groups: 2 3 > [ 0.424026] domain 1: span 0-3 > [ 0.424026] groups: 2-3 0-1 > [ 0.424026] domain 2: span 0-3 > [ 0.424026] groups: 0-3 > [ 0.424026] CPU3 attaching sched-domain: > [ 0.424026] domain 0: span 2-3 > [ 0.424026] groups: 3 2 > [ 0.424026] domain 1: span 0-3 > [ 0.424026] groups: 2-3 0-1 > [ 0.424026] domain 2: span 0-3 > [ 0.424026] groups: 0-3 > [ 0.424026] net_namespace: 1224 bytes > [ 0.424026] Booting paravirtualized kernel on bare hardware > [ 0.424026] NET: Registered protocol family 16 > [ 0.424026] ACPI: bus type pci registered > [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.424026] PCI: Not using MMCONFIG. > [ 0.424026] PCI: Using configuration type 1 for base access > [ 0.428602] ACPI: EC: Look up EC in DSDT > [ 0.447520] ACPI: Interpreter enabled > [ 0.447523] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.447539] ACPI: Using IOAPIC for interrupt routing > [ 0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard > resources > [ 0.470851] PCI: Using MMCONFIG at e0000000 - efffffff > [ 0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.500771] PCI: Transparent bridge - 0000:00:09.0 > [ 0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT] > [ 0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] > [ 0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > [ 0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > [ 0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] > [ 0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > [ 0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, > disabled. > [ 0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, > disabled. > [ 0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, > disabled. > [ 0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, > disabled. > [ 0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7 > [ 0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, > disabled. > [ 0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, > disabled. > [ 0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, > disabled. > [ 0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, > disabled. > [ 0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10 > [ 0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, > disabled. > [ 0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, > disabled. > [ 0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, > disabled. > [ 0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, > disabled. > [ 0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9 > [ 0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 > [ 0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 > [ 0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9 > [ 0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, > disabled. > [ 0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 > [ 0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 > [ 0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 > [ 0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, > disabled. > [ 0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 > [ 0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 > [ 0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10 > [ 0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, > disabled. > [ 0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, > disabled. > [ 0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11 > [ 0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9 > [ 0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15 > [ 0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14 > [ 0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.540903] pnp: PnP ACPI init > [ 0.540903] ACPI: bus type pnp registered > [ 0.540903] pnp 00:00: parse allocated resources > [ 0.540903] pnp 00:00: add io 0xcf8-0xcff flags 0x1 > [ 0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > [ 0.540903] pnp 00:01: parse allocated resources > [ 0.540903] pnp 00:01: add dma 4 flags 0x4 > [ 0.540903] pnp 00:01: add io 0x0-0xf flags 0x1 > [ 0.540903] pnp 00:01: add io 0x81-0x83 flags 0x1 > [ 0.540903] pnp 00:01: add io 0x87-0x87 flags 0x1 > [ 0.540903] pnp 00:01: add io 0x89-0x8b flags 0x1 > [ 0.540903] pnp 00:01: add io 0x8f-0x8f flags 0x1 > [ 0.540903] pnp 00:01: add io 0xc0-0xdf flags 0x1 > [ 0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.540926] pnp 00:02: parse allocated resources > [ 0.540930] pnp 00:02: add io 0x61-0x61 flags 0x1 > [ 0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.544903] pnp 00:03: parse allocated resources > [ 0.544903] pnp 00:03: add io 0xf0-0xff flags 0x1 > [ 0.544903] pnp 00:03: add irq 13 flags 0x1 > [ 0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.544903] pnp 00:04: parse allocated resources > [ 0.544903] pnp 00:04: add io 0x10-0x1f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x22-0x3f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x44-0x4d flags 0x1 > [ 0.544903] pnp 00:04: add io 0x50-0x5f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x62-0x63 flags 0x1 > [ 0.544903] pnp 00:04: add io 0x65-0x6f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x72-0x7f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x80-0x80 flags 0x1 > [ 0.544903] pnp 00:04: add io 0x84-0x86 flags 0x1 > [ 0.544903] pnp 00:04: add io 0x88-0x88 flags 0x1 > [ 0.544903] pnp 00:04: add io 0x8c-0x8e flags 0x1 > [ 0.544903] pnp 00:04: add io 0x90-0x9f flags 0x1 > [ 0.544903] pnp 00:04: add io 0xa2-0xbf flags 0x1 > [ 0.544903] pnp 00:04: add io 0xe0-0xef flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1 > [ 0.544903] pnp 00:04: add io 0x800-0x80f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4000-0x407f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4080-0x40ff flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4400-0x447f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4480-0x44ff flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4800-0x487f flags 0x1 > [ 0.544903] pnp 00:04: add io 0x4880-0x48ff flags 0x1 > [ 0.544903] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000 > [ 0.544903] pnp 00:04: add mem 0xfefe2000-0xfefe3fff flags 0x0 > [ 0.544903] pnp 00:04: add mem 0xfefe1000-0xfefe1fff flags 0x0 > [ 0.544903] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0 > [ 0.544903] pnp 00:04: PNP0c02: calling > quirk_system_pci_resources+0x0/0x15c > [ 0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.544903] pnp 00:05: parse allocated resources > [ 0.544903] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1 > [ 0.544903] pnp 00:05: add irq 8 flags 0x1 > [ 0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.544903] pnp 00:06: parse allocated resources > [ 0.544903] pnp 00:06: add io 0x70-0x71 flags 0x1 > [ 0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.544903] pnp 00:07: parse allocated resources > [ 0.544903] pnp 00:07: add mem 0xfec00000-0xfec00fff flags 0x0 > [ 0.544903] pnp 00:07: add mem 0xfee00000-0xfee00fff flags 0x0 > [ 0.544903] pnp 00:07: PNP0c02: calling > quirk_system_pci_resources+0x0/0x15c > [ 0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.544903] pnp 00:08: parse allocated resources > [ 0.544903] pnp 00:08: add io 0x60-0x60 flags 0x1 > [ 0.544903] pnp 00:08: add io 0x64-0x64 flags 0x1 > [ 0.544903] pnp 00:08: add irq 1 flags 0x1 > [ 0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b > (active) > [ 0.548903] pnp 00:09: parse allocated resources > [ 0.548903] pnp 00:09: add irq 12 flags 0x1 > [ 0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 > (active) > [ 0.548903] pnp 00:0a: parse allocated resources > [ 0.548903] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001 > [ 0.548903] pnp 00:0a: add io 0xa00-0xa0f flags 0x1 > [ 0.548903] pnp 00:0a: add io 0xa10-0xa1f flags 0x1 > [ 0.548903] pnp 00:0a: add io 0xa20-0xa2f flags 0x1 > [ 0.548903] pnp 00:0a: add io 0xa30-0xa3f flags 0x1 > [ 0.548903] pnp 00:0a: PNP0c02: calling > quirk_system_pci_resources+0x0/0x15c > [ 0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.548903] pnp 00:0b: parse allocated resources > [ 0.548903] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0 > [ 0.548903] pnp 00:0b: PNP0c02: calling > quirk_system_pci_resources+0x0/0x15c > [ 0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.548903] pnp 00:0c: parse allocated resources > [ 0.548903] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1 > [ 0.548903] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0 > [ 0.548903] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0 > [ 0.548903] pnp 00:0c: add mem 0x100000-0xcfffffff flags 0x1 > [ 0.548903] pnp 00:0c: add mem 0xfec00000-0xffffffff flags 0x0 > [ 0.548903] pnp 00:0c: PNP0c01: calling > quirk_system_pci_resources+0x0/0x15c > [ 0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.554581] pnp: PnP ACPI: found 13 devices > [ 0.554581] ACPI: ACPI bus type pnp unregistered > [ 0.554581] usbcore: registered new interface driver usbfs > [ 0.554581] usbcore: registered new interface driver hub > [ 0.554581] usbcore: registered new device driver usb > [ 0.554581] PCI: Using ACPI for IRQ routing > [ 0.571245] PCI-GART: No AMD northbridge found. > [ 0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 > [ 0.571257] hpet0: 4 64-bit timers, 25000000 Hz > [ 0.575216] ACPI: RTC can wake from S4 > [ 0.578101] Switched to high resolution mode on CPU 0 > [ 0.578546] Switched to high resolution mode on CPU 1 > [ 0.578551] Switched to high resolution mode on CPU 3 > [ 0.579207] Switched to high resolution mode on CPU 2 > [ 0.590046] pnp: the driver 'system' has been registered > [ 0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved > [ 0.590062] system 00:04: ioport range 0x800-0x80f has been reserved > [ 0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved > [ 0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved > [ 0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved > [ 0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved > [ 0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved > [ 0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved > [ 0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been > reserved > [ 0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been > reserved > [ 0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been > reserved > [ 0.590087] system 00:04: driver attached > [ 0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be > reserved > [ 0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be > reserved > [ 0.590099] system 00:07: driver attached > [ 0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved > [ 0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved > [ 0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved > [ 0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved > [ 0.590115] system 00:0a: driver attached > [ 0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been > reserved > [ 0.590122] system 00:0b: driver attached > [ 0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved > [ 0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved > [ 0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved > [ 0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be > reserved > [ 0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be > reserved > [ 0.590140] system 00:0c: driver attached > [ 0.593429] PCI: Bridge: 0000:00:09.0 > [ 0.593429] IO window: disabled. > [ 0.593429] MEM window: disabled. > [ 0.593429] PREFETCH window: disabled. > [ 0.593429] PCI: Bridge: 0000:00:0c.0 > [ 0.593429] IO window: e000-efff > [ 0.593429] MEM window: 0xfa000000-0xfeafffff > [ 0.593429] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff > [ 0.593429] PCI: Bridge: 0000:00:15.0 > [ 0.593429] IO window: disabled. > [ 0.593429] MEM window: disabled. > [ 0.593429] PREFETCH window: disabled. > [ 0.593429] PCI: Bridge: 0000:00:16.0 > [ 0.593429] IO window: disabled. > [ 0.593429] MEM window: disabled. > [ 0.593429] PREFETCH window: disabled. > [ 0.593429] PCI: Bridge: 0000:00:17.0 > [ 0.593429] IO window: disabled. > [ 0.593429] MEM window: 0xfeb00000-0xfebfffff > [ 0.593429] PREFETCH window: disabled. > [ 0.593429] PCI: Bridge: 0000:00:18.0 > [ 0.593429] IO window: disabled. > [ 0.593429] MEM window: disabled. > [ 0.593429] PREFETCH window: disabled. > [ 0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64 > [ 0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23 > [ 0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] -> GSI 23 > (level, low) -> IRQ 23 > [ 0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64 > [ 0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22 > [ 0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] -> GSI 22 > (level, low) -> IRQ 22 > [ 0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64 > [ 0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21 > [ 0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] -> GSI 21 > (level, low) -> IRQ 21 > [ 0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64 > [ 0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20 > [ 0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] -> GSI 20 > (level, low) -> IRQ 20 > [ 0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64 > [ 0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23 > [ 0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] -> GSI 23 > (level, low) -> IRQ 23 > [ 0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64 > [ 0.593430] NET: Registered protocol family 2 > [ 0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 0.644364] TCP established hash table entries: 524288 (order: 11, 8388608 > bytes) > [ 0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.649453] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.649456] TCP reno registered > [ 0.658058] NET: Registered protocol family 1 > [ 0.658160] checking if image is initramfs... it is > [ 1.186404] Freeing initrd memory: 7350k freed > [ 1.191507] audit: initializing netlink socket (disabled) > [ 1.191507] type=2000 audit(1294606162.172:1): initialized > [ 1.201065] Total HugeTLB memory allocated, 0 > [ 1.201065] VFS: Disk quotas dquot_6.5.1 > [ 1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 1.201065] msgmni has been set to 16015 > [ 1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 1.201065] io scheduler noop registered > [ 1.201065] io scheduler anticipatory registered > [ 1.201065] io scheduler deadline registered > [ 1.201065] io scheduler cfq registered (default) > [ 1.272051] pci 0000:02:00.0: Boot video device > [ 1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64 > [ 1.272968] assign_interrupt_mode Found MSI capability > [ 1.272968] Allocate Port Service[0000:00:0c.0:pcie00] > [ 1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64 > [ 1.272968] assign_interrupt_mode Found MSI capability > [ 1.272968] Allocate Port Service[0000:00:15.0:pcie00] > [ 1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64 > [ 1.272968] assign_interrupt_mode Found MSI capability > [ 1.272968] Allocate Port Service[0000:00:16.0:pcie00] > [ 1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64 > [ 1.272968] assign_interrupt_mode Found MSI capability > [ 1.272968] Allocate Port Service[0000:00:17.0:pcie00] > [ 1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64 > [ 1.273122] assign_interrupt_mode Found MSI capability > [ 1.273122] Allocate Port Service[0000:00:18.0:pcie00] > [ 1.278234] hpet_resources: 0xfed00000 is busy > [ 1.278234] Linux agpgart interface v0.103 > [ 1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > [ 1.278234] pnp: the driver 'serial' has been registered > [ 1.282230] brd: module loaded > [ 1.282230] input: Macintosh mouse button emulation as /class/input/input0 > [ 1.282230] pnp: the driver 'i8042 kbd' has been registered > [ 1.282230] i8042 kbd 00:08: driver attached > [ 1.282230] pnp: the driver 'i8042 aux' has been registered > [ 1.282230] i8042 aux 00:09: driver attached > [ 1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 > irq 1,12 > [ 1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.302218] mice: PS/2 mouse device common for all mice > [ 1.302218] pnp: the driver 'rtc_cmos' has been registered > [ 1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 1.302218] rtc0: alarms up to one year, y3k > [ 1.302218] rtc_cmos 00:06: driver attached > [ 1.302218] cpuidle: using governor ladder > [ 1.302218] cpuidle: using governor menu > [ 1.302218] No iBFT detected. > [ 1.302563] TCP cubic registered > [ 1.302563] NET: Registered protocol family 17 > [ 1.302563] registered taskstats version 1 > [ 1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22 > UTC (1294606162) > [ 1.302563] Freeing unused kernel memory: 392k freed > [ 1.326091] input: AT Translated Set 2 keyboard as /class/input/input1 > [ 1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm P001Ist 11 INTL > 20051117) > [ 1.379078] ACPI: ACPI0007:00 is registered as cooling_device0 > [ 1.379078] ACPI: Processor [P001] (supports 8 throttling states) > [ 1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm P002Ist 12 INTL > 20051117) > [ 1.379078] ACPI: ACPI0007:01 is registered as cooling_device1 > [ 1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm P003Ist 12 INTL > 20051117) > [ 1.379078] ACPI: ACPI0007:02 is registered as cooling_device2 > [ 1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm P004Ist 12 INTL > 20051117) > [ 1.383072] ACPI: ACPI0007:03 is registered as cooling_device3 > [ 1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0 > [ 1.383072] ACPI: Thermal Zone [THRM] (33 C) > [ 1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 > [ 1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] -> GSI 22 > (level, low) -> IRQ 22 > [ 1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64 > [ 1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller > [ 1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus > number 1 > [ 1.556086] ehci_hcd 0000:00:04.1: debug port 1 > [ 1.556086] PCI: cache line size of 32 is not supported by device > 0000:00:04.1 > [ 1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00 > [ 1.556731] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) > Driver > [ 1.560731] No dock devices found. > [ 1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 1.564968] usb usb1: configuration #1 chosen from 1 choice > [ 1.564995] hub 1-0:1.0: USB hub found > [ 1.565003] hub 1-0:1.0: 6 ports detected > [ 1.568731] SCSI subsystem initialized > [ 1.580731] libata version 3.00 loaded. > [ 1.673459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.673459] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.673459] usb usb1: Product: EHCI Host Controller > [ 1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd > [ 1.673459] usb usb1: SerialNumber: 0000:00:04.1 > [ 1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 > [ 1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] -> GSI 21 > (level, low) -> IRQ 21 > [ 1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64 > [ 1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller > [ 1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus > number 2 > [ 1.673459] ehci_hcd 0000:00:06.1: debug port 1 > [ 1.673459] PCI: cache line size of 32 is not supported by device > 0000:00:06.1 > [ 1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800 > [ 1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 1.689512] usb usb2: configuration #1 chosen from 1 choice > [ 1.689537] hub 2-0:1.0: USB hub found > [ 1.689543] hub 2-0:1.0: 6 ports detected > [ 1.792316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.792319] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.792321] usb usb2: Product: EHCI Host Controller > [ 1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd > [ 1.792324] usb usb2: SerialNumber: 0000:00:06.1 > [ 1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 > [ 1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] -> GSI 20 > (level, low) -> IRQ 20 > [ 1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64 > [ 1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller > [ 1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus > number 3 > [ 1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000 > [ 1.855515] usb usb3: configuration #1 chosen from 1 choice > [ 1.855538] hub 3-0:1.0: USB hub found > [ 1.855544] hub 3-0:1.0: 6 ports detected > [ 1.957533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.957536] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.957538] usb usb3: Product: OHCI Host Controller > [ 1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd > [ 1.957541] usb usb3: SerialNumber: 0000:00:04.0 > [ 1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 > [ 1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] -> GSI 23 > (level, low) -> IRQ 23 > [ 1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64 > [ 1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller > [ 1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus > number 4 > [ 1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000 > [ 2.015521] usb usb4: configuration #1 chosen from 1 choice > [ 2.015543] hub 4-0:1.0: USB hub found > [ 2.015549] hub 4-0:1.0: 6 ports detected > [ 2.105477] usb 2-3: new high speed USB device using ehci_hcd and address 2 > [ 2.117542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.117545] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.117547] usb usb4: Product: OHCI Host Controller > [ 2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd > [ 2.117550] usb usb4: SerialNumber: 0000:00:06.0 > [ 2.121473] forcedeth: Reverse Engineered nForce ethernet driver. Version > 0.61. > [ 2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 > [ 2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 > (level, low) -> IRQ 22 > [ 2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64 > [ 2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has > an invalid bInterval 30, changing to 8 > [ 2.275186] usb 2-3: configuration #1 chosen from 1 choice > [ 2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152 > [ 2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2.278384] usb 2-3: Product: USB2.0-CRW > [ 2.278384] usb 2-3: Manufacturer: Generic > [ 2.278384] usb 2-3: SerialNumber: 20060413092100000 > [ 2.300419] Initializing USB Mass Storage driver... > [ 2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr > 00:22:68:3a:6a:b7 > [ 2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit > lnktim msi desc-v3 > [ 2.801910] ahci 0000:00:0b.0: version 3.0 > [ 2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 > [ 2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] -> GSI 21 > (level, low) -> IRQ 21 > [ 2.950553] usb 3-4: new low speed USB device using ohci_hcd and address 2 > [ 3.169044] usb 3-4: configuration #1 chosen from 1 choice > [ 3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030 > [ 3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 3.169044] usb 3-4: Product: Media Center Interface > [ 3.169044] usb 3-4: Manufacturer: Device > [ 3.517035] usb 4-4: new low speed USB device using ohci_hcd and address 2 > [ 3.905098] usb 4-4: configuration #1 chosen from 1 choice > [ 3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033 > [ 3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 3.922233] usb 4-4: Product: eHome Infrared Transceiver > [ 3.922235] usb 4-4: Manufacturer: Northstar System Corp. > [ 3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000 > [ 3.922229] usbcore: registered new interface driver hiddev > [ 3.925096] scsi0 : SCSI emulation for USB Mass Storage devices > [ 3.925096] usb-storage: device found at 2 > [ 3.925096] usb-storage: waiting for device to settle before scanning > [ 4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f > impl RAID mode > [ 4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part > [ 4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64 > [ 4.090205] scsi1 : ahci > [ 4.090703] scsi2 : ahci > [ 4.090703] scsi3 : ahci > [ 4.090703] scsi4 : ahci > [ 4.090703] scsi5 : ahci > [ 4.090703] scsi6 : ahci > [ 4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72100 > irq 1274 > [ 4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72180 > irq 1274 > [ 4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72200 > irq 1274 > [ 4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72280 > irq 1274 > [ 4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72300 > irq 1274 > [ 4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72380 > irq 1274 > [ 4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133 > [ 4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32) > [ 4.659284] ata1.00: configured for UDMA/133 > [ 5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100 > [ 5.142984] ata2.00: configured for UDMA/100 > [ 5.467117] ata3: SATA link down (SStatus 0 SControl 300) > [ 6.082425] ata4: SATA link down (SStatus 0 SControl 300) > [ 6.405773] ata5: SATA link down (SStatus 0 SControl 300) > [ 6.725774] ata6: SATA link down (SStatus 0 SControl 300) > [ 7.115290] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 > PQ: 0 ANSI: 5 > [ 7.115290] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00 > PQ: 0 ANSI: 5 > [ 7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19 > [ 7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] -> GSI 19 > (level, low) -> IRQ 19 > [ 7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64 > [ 7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] > MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 7.467156] Driver 'sd' needs updating - please use bus_type methods > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 > MB) > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 > MB) > [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off > [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 7.467156] sda:<4>Driver 'sr' needs updating - please use bus_type > methods > [ 7.484514] sda1 sda2 > [ 7.484644] sd 1:0:0:0: [sda] Attached SCSI disk > [ 7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 7.712076] Uniform CD-ROM driver Revision: 3.20 > [ 7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0 > [ 7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0 > [ 7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5 > [ 9.251645] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00995efa00016c20] > [ 11.721065] usb-storage: device scan complete > [ 11.721065] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.00 > PQ: 0 ANSI: 0 CCS > [ 12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk > [ 12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0 > [ 17.887389] usbhid: timeout initializing reports > [ 17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on > usb-0000:00:06.1-3 > [ 17.887477] usbcore: registered new interface driver usb-storage > [ 17.887480] USB Mass Storage support registered. > [ 18.452265] input: Device Media Center Interface as /class/input/input2 > [ 18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media > Center Interface] on usb-0000:00:04.0-4 > [ 18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center > Interface] on usb-0000:00:04.0-4 > [ 18.483626] usbcore: registered new interface driver usbhid > [ 18.483629] usbhid: v2.6:USB HID core driver > [ 18.559424] device-mapper: uevent: version 1.0.3 > [ 18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: > dm-devel@xxxxxxxxxx > [ 18.682017] PM: Starting manual resume from disk > [ 18.753394] kjournald starting. Commit interval 5 seconds > [ 18.753394] EXT3-fs: mounted filesystem with ordered data mode. > [ 19.766553] udevd version 125 started > [ 20.072797] input: Power Button (FF) as /class/input/input3 > [ 20.165593] ACPI: Power Button (FF) [PWRF] > [ 20.167337] input: Power Button (CM) as /class/input/input4 > [ 20.231290] ACPI: Power Button (CM) [PWRB] > [ 20.233467] ACPI: WMI: Mapper loaded > [ 20.381495] input: PC Speaker as /class/input/input5 > [ 20.398514] Error: Driver 'pcspkr' is already registered, aborting... > [ 20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 > [ 20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] -> GSI 20 > (level, low) -> IRQ 20 > [ 20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64 > [ 22.555585] EXT3 FS on dm-0, internal journal > [ 23.159449] loop: module loaded > [ 23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1. > Priority:-1 extents:1 across:24023032k > xenhost:~# > > > > > > From: vchampion@xxxxxxxxx > Date: Sun, 9 Jan 2011 10:13:30 +0300 > Subject: Re: [Xen-users] (no subject) > To: sawozny@xxxxxxxxxxx > CC: Xen-users@xxxxxxxxxxxxxxxxxxx > > Hi! > > > On which state the loading of xen kernel stops? What are you seeing on > display in that moment? > Can you put dmesg here? > > > 2011/1/9 Scott A. Wozny <sawozny@xxxxxxxxxxx> > > > OK, so after several weeks of trying to get various versions of Xen running > of various distributions, I'm starting to wonder if I've got a hardware > compatibility problem and as the system never really boots with the Xen > kernel I've got no log files to tell me where the problem is. I was > wondering if there's a way to compile from source with debug turned on, > particularly for early boot problems, and where those logs get stored. > > In my research, it seems like everyone who has had problems getting Xen > running has fixed it through errors reported during the compile process and > correcting source files to match but I've been poring through the thousands > of lines of output produced by the various makes I've been doing in different > distro and source combinations and I can't find anything that says "You have > a problem here". They just compile cleanly and then don't boot. > > Any and all suggestions would be greatly appreciated. > > Thanks, > > Scott > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |