[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Waiting for root file system...


  • To: "Fajar A. Nugraha" <list@xxxxxxxxx>
  • From: chrisbenninger <chrisbenninger@xxxxxxxxx>
  • Date: Mon, 10 Jan 2011 18:51:08 -0800
  • Cc: Xen User-List <xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Mon, 10 Jan 2011 18:52:54 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-type; b=VO66dZuwkAzP1Svi3MdFdpr+nNOnXpvyxlYqaAd65qH1ckuM0vUl/Kqx8xX5DKfOXU 7i6uOK1srdiVZvGHRMqAfUHpFkGnDkjehKf2PRpOEuJ+PG3IvrFyUk7fWyrvoJ2FY39Q fXbLqCAp1/Wo9eZ8S0VzeSmb7rsmtWkqJUceg=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I generated a new image and this time it worked. I guess the internals of the image didn't match the configuration in the .cfg file?

Chris Benninger
University of Victoria, Computer Science
cbenning@xxxxxxxxxx
http://benninger.ca


On Mon, Jan 10, 2011 at 6:28 PM, Fajar A. Nugraha <list@xxxxxxxxx> wrote:
On Tue, Jan 11, 2011 at 7:32 AM, chrisbenninger
<chrisbenninger@xxxxxxxxx> wrote:
> Whoops,

Please keep list traffic on the list. Someone else might experience
the same problem and can benefit from reading the archives.

> Sorry that xvda was leftover after I tried something, My apologies: The
> config is:
>>
>> kernel = "/boot/vmlinuz-2.6.32.27"
>> ramdisk = "/boot/initrd.img-2.6.32.27-xen"
>> memory = 512
>> vcpus = 1
>> name = "ubuntu910_3"
>> disk =
>> ['file:/media/vm/appliances/ubuntu910_3/ubuntu.9-10.x86-64.img,sda1,w']
>> root = "/dev/sda1 ro"
>> extra = "xencons=tty"
>
> The output is identical to before.

Then the suggestion is identical as before. Have you done it?

> I feel like I am missing a module in the
> initrd but I am not sure which.
>
> Chris Benninger
> University of Victoria, Computer Science
> cbenning@xxxxxxxxxx
> http://benninger.ca
>
>
> On Mon, Jan 10, 2011 at 4:21 PM, Fajar A. Nugraha <list@xxxxxxxxx> wrote:
>>
>> On Tue, Jan 11, 2011 at 6:09 AM, chrisbenninger
>> <chrisbenninger@xxxxxxxxx> wrote:
>> > The domU is booting the 2.6.32.27 kernel with an initrd i generated and
>> > was
>> > using before just fine.
>>
>> Really?
>> Usually things don't "just break"
>>
>> >>     0.161289] xvde1: detected capacity change from 0 to 10486808576
>>
>> >> ['file:/media/vm/appliances/ubuntu910_3/ubuntu.9-10.x86-64.img,sda1,w']
>> >> root = "/dev/xvda1 ro"
>>
>> If you only map one disk, then something weird is happening, cause the
>> boot log say it's detected as xvde1. Try changing "root" parameter on
>> your config file to that (or whatever the boot log shows if it changes
>> again).
>>
>> It might be easier if you use LABEL or UUID. That way you don't have
>> to worry about device name change.
>>
>> --
>> Fajar
>
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.