[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] VGA passthrough => no screen VGA at th first boot of my domU but all works fine after second..
Hello list, I'm on linux Ubuntu 10.04 with Xen 4.01 and pvops kernel 2.6.32.27 I have a Dell Lattitude E6500 with VT-D activated. I have passthrough all my USB port and VGA display in my domU Windows XP but i have a little problem with the VGA display, when my HVM Windows XP start, I haven't the first time the VGA screen, i must restart the HVM to have it... strange ! This is my config file of my domU: kernel='/usr/lib/xen/boot/hvmloader' builder='hvm' memory=1024 name='XP' vcpus=2 vif=['type=ioemu, mac=xx:xx:xx:xx:xx, bridge=eth0'] disk=['phy:/dev/data/XPC,hda,w', 'phy:/dev/data/XPD,hdb,w'] device_model='/usr/lib/xen/bin/qemu-dm' boot='dc' gfx_passthru=1 pci=['00:02.0','00:02.1','00:1b.0','00:1a.0','00:1a.1','00:1a.2','00:1d.0','00:1d.1','00:1d.2','00:1d.7'] #vnc=1 #vncviewer=0 #vncdisplay=1 #nographic=0 #usbdevice='tablet' #keymap='fr' In the xend.log, I have just a Warning message: [2011-01-26 13:35:14 3968] WARNING (pciif:423) pci: 0000:00:02.0: it is on bus 0, but has no PCI Advanced Capabilities for FLR. Will try the Dstate transition method or some vendor specific methods if available. The pci: 0000:00:02.0 is my VGA card. Someone has already encountered this problem ? I have tested with the line gfx_passthru=0 but nothing to do. Thanks in advance for your answer. Regards, Rémi _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |