[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Bonded interfaces with trunk and iscsi SAN



On 2/16/2011 3:41 PM, Fajar A. Nugraha wrote:
On Thu, Feb 17, 2011 at 4:35 AM, Donny Brooks<dbrooks@xxxxxxxxxxxxxxxx>  wrote:
Ok, I added the IP information to the ifcfg-br20 file and ifdown/ifup that
interface. I am able to ping the 192.168.130.X range but nothing in the
192.168.131.X, 192.168.132.X, or 192.168.133.X ranges. Here is the contents
of that file:

DEVICE=br20
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.130.51
NETMASK=255.255.0.0
NETWORK=192.168.0.0
ONBOOT=yes
Does all host in 192.168.X.X use the same /16 (255.255.0.0) netmask?
A common error is when some hosts use /16, while others use /24.

The only thing on that vlan is the SAN. Now that I think about it the windows machine is set to a /24 on each interface. So it may be that the SAN is set for /24 instead of /16. Now just to figure out how to have 4 "interfaces" each with a /24 subnet...... hmmmm. :)

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.