Hi,
I have installed a fresh CentOS 5.6 machine, done all updates.
Installed the
kernel-xen (kernel-xen-2.6.18-238.9.1.el5)
and gitco http://www.gitco.de/repo/GITCO-XEN4.1.0_x86_64.repo in
/etc/yum.repos.d.
did yum install xen and rebooted, everything looks ok but when I try to
create a domain using CentOS 5.6 and it hangs
after
mounting /sys filesystem... done
Here are my outputs please let me know if you need anything else or
it is a
known issue:
# uname -a
Linux thishost.thisdomain.com 2.6.18-238.9.1.el5xen #1 SMP Tue Apr 12
18:53:56 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
# xm dm
__ __ _ _ _ ___
\ \/ /___ _ __ | || | / | / _ \
\ // _ \ '_ \ | || |_ | || | | |
/ \ __/ | | | |__ _|| || |_| |
/_/\_\___|_| |_| |_|(_)_(_)___/
(XEN) Xen version 4.1.0 (root@xxxxxxxxx) (gcc version 4.1.2 20080704
(Red
Hat 4.1.2-50)) Sun Apr 10 13:54:06 CEST 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line:
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bd9ffc00 (usable)
(XEN) 00000000bd9ffc00 - 00000000bda53c00 (ACPI NVS)
(XEN) 00000000bda53c00 - 00000000bda55c00 (ACPI data)
(XEN) 00000000bda55c00 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000238000000 (usable)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FC7CD, 0094 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: FACP 000FC8FD, 00F4 (r3 DELL B10K 15
ASL 61)
(XEN) ACPI: DSDT FFE9CFCA, 545E (r1 DELL dt_ex 1000 INTL
20050624)
(XEN) ACPI: FACS BD9FFC00, 0040
(XEN) ACPI: SSDT FFEA2547, 00AA (r1 DELL st_ex 1000 INTL
20050624)
(XEN) ACPI: APIC 000FC9F1, 0092 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: BOOT 000FCA83, 0028 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: ASF! 000FCAAB, 0096 (r32 DELL B10K 15
ASL 61)
(XEN) ACPI: MCFG 000FCB41, 003E (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: HPET 000FCB7F, 0038 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: TCPA 000FCDDB, 0032 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: DMAR 000FCE0D, 0108 (r1 DELL B10K 15
ASL 61)
(XEN) ACPI: SSDT BD9FFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
20050624)
(XEN) ACPI: SSDT BDA00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
20050624)
(XEN) ACPI: SSDT BDA00452, 01F9 (r1 DpgPmm Cpu2Ist 11 INTL
20050624)
(XEN) ACPI: SSDT BDA0085B, 01F9 (r1 DpgPmm Cpu3Ist 11 INTL
20050624)
(XEN) ACPI: SSDT BDA00C64, 0190 (r1 DpgPmm CpuPm 10 INTL
20050624)
(XEN) System RAM: 8025MB (8218228kB)
(XEN) Domain heap initialised
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) Processor #2 7:7 APIC version 20
(XEN) Processor #3 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Table is not found!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2992.547 MHz processor.
(XEN) Initing memory sharing.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation not enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
0xffffffff8081b02c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000022e000000->0000000230000000 (1984411
pages to
be allocated)
(XEN) Init. ramdisk: 0000000237be4000->0000000237fffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff8081b02c
(XEN) Init. ramdisk: ffffffff8081c000->ffffffff80c37a00
(XEN) Phys-Mach map: ffffffff80c38000->ffffffff81b6ddb8
(XEN) Start info: ffffffff81b6e000->ffffffff81b6e4b4
(XEN) Page tables: ffffffff81b6f000->ffffffff81b82000
(XEN) Boot stack: ffffffff81b82000->ffffffff81b83000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:850: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:853: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:828: DMAR:[DMA Write] Request device [00:02.0]
fault
addr f7fdfb000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff830233301520 bdf = 0:2.0 gmfn =
f7fdfb
(XEN) root_entry = ffff8302332b9000
(XEN) root_entry[0] = 80f9001
(XEN) context = ffff8300080f9000
(XEN) context[10] = 1_92c4001
(XEN) l3 = ffff8300092c4000
(XEN) l3_index = 3d
(XEN) l3[3d] = 0
(XEN) l3[3d] not present
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation not enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
0xffffffff8081b02c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000022e000000->0000000230000000 (1984411
pages to
be allocated)
(XEN) Init. ramdisk: 0000000237be4000->0000000237fffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff8081b02c
(XEN) Init. ramdisk: ffffffff8081c000->ffffffff80c37a00
(XEN) Phys-Mach map: ffffffff80c38000->ffffffff81b6ddb8
(XEN) Start info: ffffffff81b6e000->ffffffff81b6e4b4
(XEN) Page tables: ffffffff81b6f000->ffffffff81b82000
(XEN) Boot stack: ffffffff81b82000->ffffffff81b83000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) [VT-D]iommu.c:850: iommu_fault_status: Fault Overflow
(XEN) [VT-D]iommu.c:853: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:828: DMAR:[DMA Write] Request device [00:02.0]
fault
addr f7fdfb000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 05h] PTE Write access is not set
(XEN) print_vtd_entries: iommu = ffff830233301520 bdf = 0:2.0 gmfn =
f7fdfb
(XEN) root_entry = ffff8302332b9000
(XEN) root_entry[0] = 80f9001
(XEN) context = ffff8300080f9000
(XEN) context[10] = 1_92c4001
(XEN) l3 = ffff8300092c4000
(XEN) l3_index = 3d
(XEN) l3[3d] = 0
(XEN) l3[3d] not present
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to
Xen)
(XEN) Freed 216kB init memory.
# xm list
Name ID Mem VCPUs State
Time(s)
Domain-0 0 6885 4 r-----
765.7
Thank you in advance,
Randy
