[Xen-users] XCP: 4TB local storage

[jessie <jessie@xxxxxxxxxxxxx>]

We are trying to setup a private cloud on the following server specs:

Supermicro Sever Boards
Quadcore xeon
12GB mem
4TB storage in RAID10

We installed XCP 1.0 and it was successful except that XCP only sees 2TB 
of storage.
Output of df -h:
----------------------------------------------------------------------
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda1             4.0G  1.5G  2.3G  39% /
none                  380M     0  380M   0% /dev/shm
----------------------------------------------------------------------

Output of fdisk -l:
-----------------------------------------------------------------------------------------------------------------------------------------------------
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util 
fdisk doesn't support GPT. Use GNU Parted.

WARNING: The size of this disk is 4.0 TB (3997997989888 bytes).
DOS partition table format can not be used on drives for volumes
larger than 2.2 TB (2199023255040 bytes). Use parted(1) and GUID
partition table format (GPT).


Disk /dev/sda: 3997.9 GB, 3997997989888 bytes
255 heads, 63 sectors/track, 486062 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1         523     4194304   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             523        1045     4194304   83  Linux
/dev/sda3            1045      267218  2138039945+  8e  Linux LVM
-----------------------------------------------------------------------------------------------------------------------------------------------------

Any idea on how this can be resolved? Thanks in advance.

--
Jessie Evangelista
Manager, Software Services
Apollo Technologies Inc


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users