[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] XEN 4.0 and dual interfaces
Short Version;Need documentation on second interface in for Xen4.0 on debian squeeze for hvm and paravirt domU's. Long Version;I am looking for something definitive on multi-network configurations in xen 4.0. I have tried both of these; http://wiki.debian.org/Xen#Dom0_.28host.29 and http://searchservervirtualization.techtarget.com/tip/Creating-additional-Xen-virtual-network-bridges I can create the interface after it is booted with this command; ./network-bridge netdev=eth1 bridge=xenbr1 start and it gives me a bridge; root@xen-07:/var/log/xen# brctl show bridge name bridge id STP enabled interfaces eth0 8000.0026b9fedf98 no peth0 xenbr1 8000.0026b9fedf9a no peth1 tap7.0 vif7.0 But my domU's can not see that interface. Finally on the xen wiki I found this but I am unsure what it means;vif = [ 'mac=00:16:5e:72:04:01,bridge=xenbr0,script=your_custom_script1', 'mac=00:16:5e:72:04:02,bridge=xenbr1,script=your_custom_script2' ] Mostly because I never get a xenbr0 here is my ifconfig print out; root@hou-xen-07:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:fe:df:98 inet addr:10.0.14.153 Bcast:10.0.14.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fefe:df98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:171813 errors:0 dropped:0 overruns:0 frame:0 TX packets:15362 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22392933 (21.3 MiB) TX bytes:2287966 (2.1 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8483 errors:0 dropped:0 overruns:0 frame:0 TX packets:8483 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1103730 (1.0 MiB) TX bytes:1103730 (1.0 MiB) peth0 Link encap:Ethernet HWaddr 00:26:b9:fe:df:98 inet6 addr: fe80::226:b9ff:fefe:df98/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:219181 errors:0 dropped:0 overruns:0 frame:0 TX packets:40454 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82814249 (78.9 MiB) TX bytes:4307386 (4.1 MiB) Interrupt:36 Memory:da000000-da012800 peth1 Link encap:Ethernet HWaddr 00:26:b9:fe:df:9a inet6 addr: fe80::226:b9ff:fefe:df9a/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:57686 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3789122 (3.6 MiB) TX bytes:1476 (1.4 KiB) Interrupt:48 Memory:dc000000-dc012800 tap7.0 Link encap:Ethernet HWaddr 3a:e1:76:b6:69:7f inet6 addr: fe80::38e1:76ff:feb6:697f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:21534 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:1253292 (1.1 MiB) vif7.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:21534 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) xenbr1 Link encap:Ethernet HWaddr 00:26:b9:fe:df:9a inet addr:10.0.11.87 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fefe:df9a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57164 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2526816 (2.4 MiB) TX bytes:468 (468.0 B)I am sure it is not working ... cause I am not doing it right. Any help would be appreciated. I currently run debian squeeze and xen4.0. regards, E./ _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |