Re: [Xen-users] XEN Dom0 hangs on boot with linux kernel 3.x

[Fabiano Francesconi <fabiano.francesconi@xxxxxxxxx>]

Nevermind, it seems that kernel v3.2-rc1 fixes this problem.

I strongly recommend you to not use it since it brings other issues. At least 
wait until it's stabilised.  

--  
Fabiano Francesconi [GPG key: 0x81E53461]


On martedà 8 novembre 2011 at 15:50, Fabiano Francesconi wrote:

> Even if I am having the feeling of talking all by myself, I debugged the 
> kernel a little and I found why my XEN machine is not starting.
>  
> The problem is that, during the boot phase, a conflict in some region of 
> memory is hit and then the function reserve_region_with_split in 
> kernel/resource.c tries to fix this conflict.
>  
> In particular, the second and last address you see in the boot log, keeps 
> looping:
>  
> > static void __init __reserve_region_with_split(struct resource *root,
> > resource_size_t start, resource_size_t end,
> > const char *name)
> > {
>  
>  
>  
>  
> > â
> > ...
> > if (conflict->start > start)
> > __reserve_region_with_split(root, start, conflict->start-1, name);
> > if (conflict->end < end)
> > __reserve_region_with_split(root, conflict->end+1, end, name);
> > }
>  
>  
>  
>  
> This function is at line 753 in kernel/resource.c
>  
> I think the conflict cannot be "fixed" (somehow, I don't even know what I'm 
> saying) but my idea is that
> there is something bad here, with some resource.
>  
> Is there a way to understand what resource is giving problems? Or to get a 
> better understanding on what's going on?
>  
> Thank you again :p  
>  
> --  
> Fabiano Francesconi [GPG key: 0x81E53461]
>  
>  
> On martedà 8 novembre 2011 at 13:35, Fabiano Francesconi wrote:
>  
> > I was able to dump the bootlog of my working kernel, you can find it here: 
> > http://cl.ly/450I3o2U2q0W3C0I1g06
> >  
> > I think the problem resides in between the following two lines:
> >  
> > > Expanded resource reserved due to conflict with PCI Bus 0000:00
> > > Switching to clocksource xen
> >  
> >  
> >  
> >  
> >  
> >  
> > I saw that on my "hanging" kernel I'm not getting the "Switching to.." 
> > message while on the working one I do.
> > Do you know what may be the culprit? I'm pretty much willing to debug the 
> > kernel a little bit but I can't find the set of instructions
> > of the boot, in particular I don't know where are the calls to those 
> > functions and there is way too much code for me to read.
> >  
> > Can somebody help me to sort this out? Thanks!  
> >  
> > --  
> > Fabiano Francesconi [GPG key: 0x81E53461]
> >  
> >  
> > On lunedà 7 novembre 2011 at 15:18, Fabiano Francesconi wrote:
> >  
> > > Thank you Niall but I cannot find that precise symbol in the kernel, but 
> > > I did play with some of the i2c settings but I did get luck so far.  
> > >  
> > > I was able to retrieve a full log of my boot that you can find here: 
> > > http://cl.ly/3i3U1d0Q2t472Z3C3x1q that refers to a kernel 3.0.7  
> > >  
> > > I, then, tried to compile a kernel using a configuration I found on the 
> > > internet that leads to a similar output (and situation) but raises a 
> > > panic. You can find the bootlog here: http://cl.ly/150j032l1e3x0Q3S1l3I
> > >  
> > > Anybody has any idea? a clue? a suggestion? a thought to share?
> > >  
> > > Thank you
> > >  
> > > --  
> > > Fabiano Francesconi [GPG key: 0x81E53461]
> > >  
> > >  
> > > On lunedà 7 novembre 2011 at 11:27, Niall Fleming wrote:
> > >  
> > > > I had a an issue with i2c_i810 kernel driver, taking this driver out of 
> > > > the kernel entirely
> > > > made the issue go away.
> > > >  
> > > > Niall Fleming BSc. (Hons)
> > > > Systems Administrator
> > > > Webanywhere Limited
> > > >  
> > > > Phone: 0800 862 0131 Ext: 203
> > > > Web: http://www.webanywhere.co.uk
> > > >  
> > > > Aire Valley Business Centre, Lawkholme Lane, Keighley, BD21 3BB
> > > > Registered in England with company number 4881346  
> > > > On 06/11/2011 21:26, Flavio wrote:  
> > > > > On 6 November 2011 22:02, Fabiano Francesconi 
> > > > > <fabiano.francesconi@xxxxxxxxx> 
> > > > > (mailto:fabiano.francesconi@xxxxxxxxx) wrote:  
> > > > > > Hi Flavio, me and Alessandro are Gentoo users as well (you can find 
> > > > > > me on #gentoo-it chan @ Freenode). I reply to you since me and 
> > > > > > Alessandro have the same issue on both of our systems. We own the 
> > > > > > same machine bought from Abaco Computers. It runs an Atom Intel 330 
> > > > > > processor so, actually, it runs on paravirtualisation. Your 
> > > > > > configuration is the same (and mandatory to run a dom0 kernel, to 
> > > > > > be honest) and it should definitively work. The problem is that 
> > > > > > there is no error during the boot as you can see from the picture. 
> > > > > > We are trying to understand where the problem is but no clue, zero 
> > > > > > ideas.  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > >  
> > > > > Hi! I actually have seen the screenshot. It is of course nearly 
> > > > > impossible to understand the reason of this behaviour if no errors 
> > > > > appear. I have an absurd problem too, as one of my previous email 
> > > > > says. The only thing that comes on my mind now is that some kernel 
> > > > > module could be a disturb to the dom0 configuration. The problem is 
> > > > > to know what this module is. Bye!  
> > > >  
> > > >  
> > > >  
> > > >  
> > > >  
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx (mailto:Xen-users@xxxxxxxxxxxxxxxxxxx)
> > > > http://lists.xensource.com/xen-users
> > >  
> >  
>  




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users