domid: 17
Using file /dev/xendisk/win7 in read-write mode
Watching /local/domain/0/device-model/17/logdirty/cmd
Watching /local/domain/0/device-model/17/command
Watching /local/domain/17/cpu
char device redirected to /dev/pts/3
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 4ce4a431-d0f2-ff1f-6921-12be048f93c8
Time offset set 0
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/17/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/4ce4a431-d0f2-ff1f-6921-12be048f93c8/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
xs_read(/local/domain/17/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/17/log-throttling'
medium change watch on `/local/domain/17/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 00:02.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x0:0x2.0x0
pt_register_regions: IO region registered (size=0x00400000 base_addr=0xfb400004)
pt_register_regions: IO region registered (size=0x10000000 base_addr=0xb000000c)
pt_register_regions: IO region registered (size=0x00000040 base_addr=0x0000f001)
pt_msi_setup: msi mapped with pirq 37
pci_intx: intx=1
register_real_device: Real physical device 00:02.0 registered successfuly!
IRQ type = MSI-INTx
char device redirected to /dev/pts/5
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0100
pt_iomem_map: e_phys=e0000000 maddr=b0000000 type=8 len=268435456 index=2 first_map=1
pt_iomem_map: e_phys=f1000000 maddr=fb400000 type=0 len=4194304 index=0 first_map=1
pt_ioport_map: e_phys=c100 pio_base=f000 len=64 index=4 first_map=1
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0100
igd_pci_read: pci_config_read: 0:0.0: addr=0 len=2 val=ffff8086
igd_pci_read: pci_config_read: 0:0.0: addr=2 len=2 val=ffff0100
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.