[ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.0-rc2+ (jrn@burratino) (gcc version 4.7.0 20120205 (experimental) [trunk revision 183903] (Debian 4.7-20120205-1) ) #21 SMP Tue Feb 7 14:31:01 CST 2012 [ 0.000000] Freeing 9f-100 pfn range: 97 pages freed [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] Freeing f6f0-f700 pfn range: 16 pages freed [ 0.000000] 1-1 mapping on f6f0->f700 [ 0.000000] 1-1 mapping on 3fef0->100000 [ 0.000000] Released 113 pages of unused memory [ 0.000000] Set 786817 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 000000000f6f0000 (usable) [ 0.000000] Xen: 000000000f6f0000 - 000000000f700000 (reserved) [ 0.000000] Xen: 000000000f700000 - 000000003fef0000 (usable) [ 0.000000] Xen: 000000003fef0000 - 000000003fef8000 (ACPI data) [ 0.000000] Xen: 000000003fef8000 - 000000003fefa000 (ACPI NVS) [ 0.000000] Xen: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI present. [ 0.000000] DMI: IBM 288173U/288173U, BIOS 1XET57WW (1.16 ) 11/30/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fef0 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 02bff000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000002d3fe000 [ 0.000000] 0000000000 - 002d3fe000 page 4k [ 0.000000] kernel direct mapping tables up to 2d3fe000 @ 2a92000-2bff000 [ 0.000000] xen: setting RW the range 2be6000 - 2bff000 [ 0.000000] RAMDISK: 01693000 - 02199000 [ 0.000000] ACPI: RSDP 000f6d90 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 3fef1ace 0005C (v01 IBM TP-1X 00001160 LTP 00000000) [ 0.000000] ACPI: FACP 3fef1b2a 00081 (v02 IBM TP-1X 00001160 IBM 00000001) [ 0.000000] ACPI: DSDT 3fef1c11 062A4 (v01 IBM TP-1X 00001160 MSFT 0100000D) [ 0.000000] ACPI: FACS 3fef9000 00040 [ 0.000000] ACPI: SSDT 3fef1bde 00033 (v01 IBM TP-1X 00001160 MSFT 0100000D) [ 0.000000] ACPI: ECDT 3fef7eb5 00051 (v01 IBM TP-1X 00001160 IBM 00000001) [ 0.000000] ACPI: APIC 3fef7f06 00068 (v01 IBM TP-1X 00001160 LOHR 00000064) [ 0.000000] ACPI: HPET 3fef7f6e 00038 (v01 IBM TP-1X 00001160 PTL 00000064) [ 0.000000] ACPI: TCPA 3fef7fa6 00032 (v01 IBM TP-1X 00001160 PTL 00000001) [ 0.000000] ACPI: BOOT 3fef7fd8 00028 (v01 IBM TP-1X 00001160 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 298MB HIGHMEM available. [ 0.000000] 723MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2d3fe000 [ 0.000000] low ram: 0 - 2d3fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002d3fe [ 0.000000] HighMem 0x0002d3fe -> 0x0003fef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000f6f0 [ 0.000000] 0: 0x0000f700 -> 0x0003fef0 [ 0.000000] On node 0 totalpages: 261743 [ 0.000000] free_area_init_node: node 0, pgdat c1368700, node_mem_map ecbfd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1416 pages used for memmap [ 0.000000] Normal zone: 179814 pages, LIFO batch:31 [ 0.000000] HighMem zone: 598 pages used for memmap [ 0.000000] HighMem zone: 75932 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1 already used, trying 2 [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000000f6f0000 - 000000000f700000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @ecbdd000 s28672 r0 d20480 u49152 [ 0.000000] pcpu-alloc: s28672 r0 d20480 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697 [ 0.000000] Kernel command line: placeholder root=/dev/mapper/data-rootfs ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2094848 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Placing 64MB software IO TLB between e8919000 - ec919000 [ 0.000000] software IO TLB at phys 0x28919000 - 0x2c919000 [ 0.000000] Initializing HighMem for node 0 (0002d3fe:0003fef0) [ 0.000000] Memory: 867032k/1047488k available (2418k kernel code, 95208k reserved, 1097k data, 352k init, 221388k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xf5716000 - 0xf57ff000 ( 932 kB) [ 0.000000] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) [ 0.000000] vmalloc : 0xedbfe000 - 0xf53fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xed3fe000 ( 723 MB) [ 0.000000] .init : 0xc136f000 - 0xc13c7000 ( 352 kB) [ 0.000000] .data : 0xc125c9d8 - 0xc136ee00 (1097 kB) [ 0.000000] .text : 0xc1000000 - 0xc125c9d8 (2418 kB) [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=e8418000 soft=e841a000 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 3186.546 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6373.09 BogoMIPS (lpj=31865460) [ 0.010000] pid_max: default: 32768 minimum: 301 [ 0.010000] Mount-cache hash table entries: 512 [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys devices [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] Initializing cgroup subsys blkio [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] ACPI: Core revision 20120111 [ 0.020130] cpu 0 spinlock event irq 273 [ 0.020278] Performance Events: unsupported Netburst CPU model 4 no PMU driver, software events only. [ 0.020785] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.021081] CPU 1 irqstacks, hard=e8484000 soft=e8486000 [ 0.021089] installing Xen timer for CPU 1 [ 0.021207] cpu 1 spinlock event irq 279 [ 0.010000] Initializing CPU#1 [ 0.021541] NMI watchdog disabled (cpu1): hardware events not enabled [ 0.021795] Brought up 2 CPUs [ 0.021982] devtmpfs: initialized [ 0.021982] PM: Registering ACPI NVS region at 3fef8000 (8192 bytes) [ 0.021982] Grant tables using version 2 layout. [ 0.021982] Grant table initialized [ 0.021982] NET: Registered protocol family 16 [ 0.021982] ACPI: bus type pci registered [ 0.021982] PCI: PCI BIOS revision 2.10 entry at 0xfd960, last bus=8 [ 0.021982] PCI: Using configuration type 1 for base access [ 0.021982] bio: create slab at 0 [ 0.021982] ACPI: Added _OSI(Module Device) [ 0.021982] ACPI: Added _OSI(Processor Device) [ 0.021982] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.021982] ACPI: Added _OSI(Processor Aggregator Device) [ 0.034453] ACPI: EC: EC description table is found, configuring boot EC [ 0.068782] ACPI: Interpreter enabled [ 0.068885] ACPI: (supports S0 S3 S4 S5) [ 0.069273] ACPI: Using IOAPIC for interrupt routing [ 0.084975] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.085562] ACPI: No dock devices found. [ 0.085664] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.090865] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.092518] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.092526] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.092533] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.092540] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.092547] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.092553] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.092560] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) [ 0.092567] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) [ 0.092574] PCI: root bus 00: using default resources [ 0.092650] PCI host bridge to bus 0000:00 [ 0.092750] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.092853] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.092998] pci 0000:00:00.0: [8086:3580] type 0 class 0x000600 [ 0.093025] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.093251] pci 0000:00:00.1: [8086:3584] type 0 class 0x000880 [ 0.093468] pci 0000:00:00.3: [8086:3585] type 0 class 0x000880 [ 0.093697] pci 0000:00:01.0: [8086:3581] type 1 class 0x000604 [ 0.093918] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03 [ 0.094066] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.094177] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03 [ 0.094326] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.094435] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03 [ 0.094583] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.094725] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03 [ 0.094790] pci 0000:00:1d.7: reg 10: [mem 0xc0000000-0xc00003ff] [ 0.095070] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.095126] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.095265] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601 [ 0.095482] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.095621] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.095771] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101 [ 0.095817] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.095849] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.095882] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.095914] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.095946] pci 0000:00:1f.1: reg 20: [io 0x1860-0x186f] [ 0.095979] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.096070] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05 [ 0.096219] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f] [ 0.096341] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401 [ 0.096395] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] [ 0.096427] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff] [ 0.096458] pci 0000:00:1f.5: reg 18: [mem 0xc0000c00-0xc0000dff] [ 0.096489] pci 0000:00:1f.5: reg 1c: [mem 0xc0000800-0xc00008ff] [ 0.096648] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.096706] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703 [ 0.096759] pci 0000:00:1f.6: reg 10: [io 0x2400-0x24ff] [ 0.096790] pci 0000:00:1f.6: reg 14: [io 0x2000-0x207f] [ 0.096998] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.097090] pci 0000:01:00.0: [10de:0324] type 0 class 0x000300 [ 0.097147] pci 0000:01:00.0: reg 10: [mem 0xc1000000-0xc1ffffff] [ 0.097177] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] [ 0.097300] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.097536] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.097651] pci 0000:00:01.0: bridge window [mem 0xc1000000-0xc1ffffff] [ 0.097665] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.097743] pci 0000:02:01.0: [104c:ac55] type 2 class 0x000607 [ 0.097799] pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.097890] pci 0000:02:01.0: supports D1 D2 [ 0.097897] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097956] pci 0000:02:01.1: [104c:ac55] type 2 class 0x000607 [ 0.098012] pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff] [ 0.098108] pci 0000:02:01.1: supports D1 D2 [ 0.098115] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.098197] pci 0000:02:02.0: [168c:0013] type 0 class 0x000200 [ 0.098253] pci 0000:02:02.0: reg 10: [mem 0xc2000000-0xc200ffff] [ 0.098619] pci 0000:00:1e.0: PCI bridge to [bus 02-08] (subtractive decode) [ 0.098734] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] [ 0.098749] pci 0000:00:1e.0: bridge window [mem 0xc2000000-0xcfffffff] [ 0.098763] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.098770] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.098777] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.099024] pci_bus 0000:00: on NUMA node 0 [ 0.099034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.099199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.099291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.099506] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.106061] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.106975] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.107886] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.108811] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.109721] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.110121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.111012] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.112072] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.112909] xen/balloon: Initialising balloon driver. [ 0.113478] xen-balloon: Initialising balloon driver. [ 0.113765] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.113765] vgaarb: loaded [ 0.113765] vgaarb: bridge control possible 0000:01:00.0 [ 0.113765] PCI: Using ACPI for IRQ routing [ 0.113765] PCI: pci_cache_line_size set to 64 bytes [ 0.113765] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.113765] reserve RAM buffer: 000000000f6f0000 - 000000000fffffff [ 0.113765] reserve RAM buffer: 000000003fef0000 - 000000003fffffff [ 0.113765] Switching to clocksource xen [ 0.113765] pnp: PnP ACPI init [ 0.113765] ACPI: bus type pnp registered [ 0.113765] pnp 00:00: [bus 00-ff] [ 0.113765] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.113765] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.113765] pnp 00:00: [io 0x0d00-0xffff window] [ 0.113765] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.113765] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.113765] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.113765] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.113765] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.113765] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.113765] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.113765] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.113765] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.113765] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.113765] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.113765] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.113765] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.113765] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.113765] pnp 00:00: [mem 0x40000000-0xfebfffff window] [ 0.113765] pnp 00:00: [mem 0x00000000 window] [ 0.113765] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.113765] pnp 00:01: [io 0x0010-0x001f] [ 0.113765] pnp 00:01: [io 0x0090-0x009f] [ 0.113765] pnp 00:01: [io 0x0024-0x0025] [ 0.113765] pnp 00:01: [io 0x0028-0x0029] [ 0.113765] pnp 00:01: [io 0x002c-0x002d] [ 0.113765] pnp 00:01: [io 0x0030-0x0031] [ 0.113765] pnp 00:01: [io 0x0034-0x0035] [ 0.113765] pnp 00:01: [io 0x0038-0x0039] [ 0.113765] pnp 00:01: [io 0x003c-0x003d] [ 0.113765] pnp 00:01: [io 0x00a4-0x00a5] [ 0.113765] pnp 00:01: [io 0x00a8-0x00a9] [ 0.113765] pnp 00:01: [io 0x00ac-0x00ad] [ 0.113765] pnp 00:01: [io 0x00b0-0x00b5] [ 0.113765] pnp 00:01: [io 0x00b8-0x00b9] [ 0.113765] pnp 00:01: [io 0x00bc-0x00bd] [ 0.113765] pnp 00:01: [io 0x004e-0x004f] [ 0.113765] pnp 00:01: [io 0x0050-0x0053] [ 0.113765] pnp 00:01: [io 0x0072-0x0077] [ 0.113765] pnp 00:01: [io 0x002e-0x002f] [ 0.113765] pnp 00:01: [io 0x1000-0x107f] [ 0.113765] pnp 00:01: [io 0x1180-0x11bf] [ 0.113765] pnp 00:01: [io 0x0600-0x060f] [ 0.113765] pnp 00:01: [io 0x0068] [ 0.113765] pnp 00:01: [io 0x006c] [ 0.113765] pnp 00:01: [io 0x0800-0x080f] [ 0.113859] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.113965] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.114069] system 00:01: [io 0x0600-0x060f] has been reserved [ 0.114172] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.114278] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.114325] pnp 00:02: [io 0x0000-0x000f] [ 0.114332] pnp 00:02: [io 0x0080-0x008f] [ 0.114338] pnp 00:02: [io 0x00c0-0x00df] [ 0.114344] pnp 00:02: [dma 4] [ 0.114414] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.114447] pnp 00:03: [io 0x0061] [ 0.114518] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.114552] pnp 00:04: [io 0x00f0] [ 0.114562] xen: registering gsi 13 triggering 1 polarity 0 [ 0.114575] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.114676] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.114692] pnp 00:04: [irq 13] [ 0.114770] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.114799] pnp 00:05: [io 0x0070-0x0071] [ 0.114807] xen: registering gsi 8 triggering 1 polarity 0 [ 0.114814] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.114914] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.114924] pnp 00:05: [irq 8] [ 0.114997] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.115027] pnp 00:06: [io 0x0060] [ 0.115033] pnp 00:06: [io 0x0064] [ 0.115040] xen: registering gsi 1 triggering 1 polarity 0 [ 0.115047] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.115147] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.115156] pnp 00:06: [irq 1] [ 0.115237] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.115266] xen: registering gsi 12 triggering 1 polarity 0 [ 0.115274] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.115374] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.115384] pnp 00:07: [irq 12] [ 0.115462] pnp 00:07: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 0.115728] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (disabled) [ 0.117496] pnp: PnP ACPI: found 9 devices [ 0.117595] ACPI: ACPI bus type pnp unregistered [ 0.133006] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.133137] PCI: max bus depth: 2 pci_try_num: 3 [ 0.133188] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff] [ 0.137567] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.137673] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.137784] pci 0000:00:01.0: bridge window [mem 0xc1000000-0xc1ffffff] [ 0.137895] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] [ 0.138039] pci 0000:02:01.0: BAR 0: assigned [mem 0xc4000000-0xc4000fff] [ 0.138154] pci 0000:02:01.1: BAR 0: assigned [mem 0xc8000000-0xc8000fff] [ 0.138269] pci 0000:02:01.1: BAR 16: assigned [mem 0xcc000000-0xcfffffff] [ 0.138375] pci 0000:02:01.1: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref] [ 0.138503] pci 0000:02:01.1: BAR 14: assigned [io 0x3000-0x30ff] [ 0.138607] pci 0000:02:01.1: BAR 13: assigned [io 0x3400-0x34ff] [ 0.138713] pci 0000:02:01.0: BAR 16: assigned [mem 0x44000000-0x47ffffff] [ 0.138820] pci 0000:02:01.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] [ 0.138948] pci 0000:02:01.0: BAR 14: assigned [io 0x3800-0x38ff] [ 0.139052] pci 0000:02:01.0: BAR 13: assigned [io 0x3c00-0x3cff] [ 0.139156] pci 0000:02:01.0: CardBus bridge to [bus 03-06] [ 0.139257] pci 0000:02:01.0: bridge window [io 0x3c00-0x3cff] [ 0.139368] pci 0000:02:01.0: bridge window [io 0x3800-0x38ff] [ 0.139479] pci 0000:02:01.0: bridge window [mem 0xf4000000-0xf7ffffff pref] [ 0.139613] pci 0000:02:01.0: bridge window [mem 0x44000000-0x47ffffff] [ 0.139725] pci 0000:02:01.1: CardBus bridge to [bus 07-07] [ 0.139827] pci 0000:02:01.1: bridge window [io 0x3400-0x34ff] [ 0.139937] pci 0000:02:01.1: bridge window [io 0x3000-0x30ff] [ 0.140048] pci 0000:02:01.1: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.140059] pci 0000:02:01.1: bridge window [mem 0xcc000000-0xcfffffff] [ 0.140059] pci 0000:00:1e.0: PCI bridge to [bus 02-08] [ 0.140059] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] [ 0.140059] pci 0000:00:1e.0: bridge window [mem 0xc2000000-0xcfffffff] [ 0.140059] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.140059] pci 0000:00:1e.0: setting latency timer to 64 [ 0.140059] xen: registering gsi 20 triggering 0 polarity 1 [ 0.140846] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.140879] xen: registering gsi 21 triggering 0 polarity 1 [ 0.140895] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.140914] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.140922] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.140929] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc1ffffff] [ 0.140935] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] [ 0.140942] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff] [ 0.140948] pci_bus 0000:02: resource 1 [mem 0xc2000000-0xcfffffff] [ 0.140954] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 0.140961] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.140967] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] [ 0.140973] pci_bus 0000:03: resource 0 [io 0x3c00-0x3cff] [ 0.140979] pci_bus 0000:03: resource 1 [io 0x3800-0x38ff] [ 0.140986] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf7ffffff pref] [ 0.140992] pci_bus 0000:03: resource 3 [mem 0x44000000-0x47ffffff] [ 0.140998] pci_bus 0000:07: resource 0 [io 0x3400-0x34ff] [ 0.141004] pci_bus 0000:07: resource 1 [io 0x3000-0x30ff] [ 0.141011] pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.141017] pci_bus 0000:07: resource 3 [mem 0xcc000000-0xcfffffff] [ 0.141063] NET: Registered protocol family 2 [ 0.141230] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.141555] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.142463] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.143141] TCP: Hash tables configured (established 131072 bind 65536) [ 0.143245] TCP reno registered [ 0.143343] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.143464] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.143730] NET: Registered protocol family 1 [ 0.144131] pci 0000:01:00.0: Boot video device [ 0.144166] PCI: CLS 32 bytes, default 64 [ 0.144291] Unpacking initramfs... [ 0.198386] Freeing initrd memory: 11288k freed [ 0.211511] Simple Boot Flag at 0x35 set to 0x1 [ 0.212322] audit: initializing netlink socket (disabled) [ 0.212445] type=2000 audit(1328648987.859:1): initialized [ 0.227075] highmem bounce pool size: 64 pages [ 0.227186] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.230219] msgmni has been set to 1283 [ 0.230872] alg: No test for stdrng (krng) [ 0.231129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.231261] io scheduler noop registered [ 0.231365] io scheduler cfq registered (default) [ 0.231750] GHES: HEST is not enabled! [ 0.232209] Event-channel device installed. [ 0.233510] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.234419] xen: registering gsi 17 triggering 0 polarity 1 [ 0.234443] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.234711] Linux agpgart interface v0.103 [ 0.235060] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 0.255360] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.255607] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.258200] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.258310] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.258765] mousedev: PS/2 mouse device common for all mice [ 0.258983] rtc_cmos 00:05: RTC can wake from S4 [ 0.259439] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.259597] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.259798] TCP cubic registered [ 0.260099] NET: Registered protocol family 10 [ 0.260438] Mobile IPv6 [ 0.260534] NET: Registered protocol family 17 [ 0.260656] Using IPI No-Shortcut mode [ 0.261074] PM: Hibernation image not present or could not be loaded. [ 0.261101] registered taskstats version 1 [ 0.261746] rtc_cmos 00:05: setting system clock to 2012-02-07 21:09:47 UTC (1328648987) [ 0.262113] Freeing unused kernel memory: 352k freed [ 0.263835] Write protecting the kernel text: 2420k [ 0.264407] Write protecting the kernel read-only data: 880k [ 0.287883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.327630] udevd[49]: starting version 175 [ 0.477294] usbcore: registered new interface driver usbfs [ 0.477470] usbcore: registered new interface driver hub [ 0.484841] usbcore: registered new device driver usb [ 0.489122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.489316] xen: registering gsi 23 triggering 0 polarity 1 [ 0.489355] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.489433] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.489450] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.489592] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.489824] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.493862] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.493950] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0000000 [ 0.520305] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.521604] hub 1-0:1.0: USB hub found [ 0.521738] hub 1-0:1.0: 6 ports detected [ 0.524674] uhci_hcd: USB Universal Host Controller Interface driver [ 0.524896] xen: registering gsi 16 triggering 0 polarity 1 [ 0.524935] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.524976] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.524994] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.525135] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.525429] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 0.553991] hub 2-0:1.0: USB hub found [ 0.554131] hub 2-0:1.0: 2 ports detected [ 0.554489] xen: registering gsi 19 triggering 0 polarity 1 [ 0.554532] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.554575] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.554593] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.554740] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.555026] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 0.580534] hub 3-0:1.0: USB hub found [ 0.580684] hub 3-0:1.0: 2 ports detected [ 0.581048] xen: registering gsi 18 triggering 0 polarity 1 [ 0.581097] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.581144] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.581161] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.581299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.581573] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 0.595314] hub 4-0:1.0: USB hub found [ 0.595456] hub 4-0:1.0: 2 ports detected [ 0.603754] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.603888] ACPI: Thermal Zone [THRM] (59 C) [ 0.686808] SCSI subsystem initialized [ 0.705332] libata version 3.00 loaded. [ 0.708337] ata_piix 0000:00:1f.1: version 2.13 [ 0.708377] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.708527] xen: registering gsi 18 triggering 0 polarity 1 [ 0.708545] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 0.708670] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.708681] Already setup the GSI :18 [ 0.708927] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.710027] scsi0 : ata_piix [ 0.713193] scsi1 : ata_piix [ 0.714773] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 0.714883] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 0.890769] ata1.00: ATA-6: HTS548080M9AT00, MG4OA5DA, max UDMA/100 [ 0.890880] ata1.00: 156301488 sectors, multi 16: LBA [ 0.900579] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.02, max UDMA/33 [ 0.930650] ata1.00: configured for UDMA/100 [ 0.931041] scsi 0:0:0:0: Direct-Access ATA HTS548080M9AT00 MG4O PQ: 0 ANSI: 5 [ 0.940500] ata2.00: configured for UDMA/33 [ 0.942580] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.02 PQ: 0 ANSI: 5 [ 0.959076] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.959475] sd 0:0:0:0: [sda] Write Protect is off [ 0.959613] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.959721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.999878] sda: sda1 sda2 sda3 < sda5 > [ 1.001270] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.310106] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 1.460008] device-mapper: uevent: version 1.0.3 [ 1.460996] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 1.782185] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.556195] udevd[249]: starting version 175 [ 3.890230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 3.890488] ACPI: Lid Switch [LID] [ 3.890770] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 3.890941] ACPI: Sleep Button [SLPB] [ 3.891233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.891398] ACPI: Power Button [PWRF] [ 4.005873] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:05/LNXVIDEO:01/input/input4 [ 4.006055] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 4.066107] ACPI: AC Adapter [AC] (on-line) [ 4.120603] iTCO_vendor_support: vendor-support=0 [ 4.226136] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 4.344425] cfg80211: Calling CRDA to update world regulatory domain [ 4.577840] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 4.590510] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 5.189927] ACPI: Battery Slot [BAT1] (battery present) [ 5.213626] Non-volatile memory driver v1.3 [ 5.250321] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 5.250674] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 5.251012] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.308625] [drm] Initialized drm 1.1.0 20060810 [ 5.332699] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 5.332822] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 5.332921] thinkpad_acpi: ThinkPad BIOS 1XET57WW (1.16 ), EC unknown [ 5.333024] thinkpad_acpi: IBM ThinkPad G41, model 288173U [ 5.336769] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 5.340676] Registered led device: tpacpi::power [ 5.340957] Registered led device: tpacpi::standby [ 5.351936] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 5.357924] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 5.676528] xen: registering gsi 18 triggering 0 polarity 1 [ 5.676545] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 5.676651] xen: --> pirq=18 -> irq=18 (gsi=18) [ 5.676658] Already setup the GSI :18 [ 5.676906] ath5k 0000:02:02.0: registered as 'phy0' [ 5.682429] wmi: Mapper loaded [ 5.883021] snd_intel8x0 0000:00:1f.5: power state changed by ACPI to D0 [ 5.883169] snd_intel8x0 0000:00:1f.5: power state changed by ACPI to D0 [ 5.883318] xen: registering gsi 17 triggering 0 polarity 1 [ 5.883336] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 5.883461] xen: --> pirq=17 -> irq=17 (gsi=17) [ 5.883472] Already setup the GSI :17 [ 5.883573] intel8x0: disable (unknown or VT-d) VM optimization [ 5.883765] snd_intel8x0 0000:00:1f.5: setting latency timer to 64 [ 5.994565] VGA switcheroo: detected Optimus DSM method \ handle [ 5.994828] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 5.994955] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 5.995091] xen: registering gsi 17 triggering 0 polarity 1 [ 5.995107] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 5.995234] xen: --> pirq=17 -> irq=17 (gsi=17) [ 5.995248] Already setup the GSI :17 [ 6.004745] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034400b1) [ 6.005961] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 6.061617] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid [ 6.061724] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 6.061867] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 6.061971] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [ 6.062260] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 6.062574] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 6.062675] [drm] nouveau 0000:01:00.0: BMP version 5.41 [ 6.062790] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.81 [ 6.063163] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 6.063295] [drm] nouveau 0000:01:00.0: DCB version 2.2 [ 6.063425] [drm] nouveau 0000:01:00.0: DCB outp 00: 030003f3 00000005 [ 6.063530] [drm] nouveau 0000:01:00.0: DCB outp 01: 01010300 000088b8 [ 6.063813] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 6.063953] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF160 [ 6.066131] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF3FB [ 6.066283] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF541 [ 6.066472] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF6F1 [ 6.066609] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF70E [ 6.066755] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF72B [ 6.125926] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF8C4 [ 6.126068] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1400x1050 (108000kHz pixel clock) [ 6.127173] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 6.127289] [drm] nouveau 0000:01:00.0: 0: core 100MHz memory 200MHz timing 0 fanspeed 100% [ 6.127427] [drm] nouveau 0000:01:00.0: 1: core 175MHz memory 350MHz timing 1 fanspeed 75% [ 6.127566] [drm] nouveau 0000:01:00.0: 2: core 200MHz memory 400MHz timing 2 fanspeed 100% [ 6.127716] [drm] nouveau 0000:01:00.0: c: core 175MHz memory 351MHz [ 6.128151] [TTM] Zone kernel: Available graphics memory: 328642 kiB. [ 6.128271] [TTM] Zone highmem: Available graphics memory: 439336 kiB. [ 6.128381] [TTM] Initializing pool allocator. [ 6.128497] [TTM] Initializing DMA pool allocator. [ 6.128620] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [ 6.128783] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 6.128953] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 6.129201] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 6.129358] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture) [ 6.129631] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 6.187012] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.187125] [drm] No driver support for vblank timestamp query. [ 6.196491] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 0) [ 6.196624] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 6.268454] ath: EEPROM regdomain: 0x64 [ 6.268461] ath: EEPROM indicates we should expect a direct regpair map [ 6.268469] ath: Country alpha2 being used: 00 [ 6.268474] ath: Regpair used: 0x64 [ 6.277217] [drm] nouveau 0000:01:00.0: allocated 1400x1050 fb: 0x49000, bo c1d0ec00 [ 6.277708] fbcon: nouveaufb (fb0) is primary device [ 6.292207] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 6.292215] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 6.292220] [drm] nouveau 0000:01:00.0: 0xE04C: Parsing digital output script table [ 6.302196] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.303163] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 6.303169] ath5k phy0: RF2112B 2GHz radio found (0x46) [ 6.792391] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 6.792400] [drm] nouveau 0000:01:00.0: 0xE168: Parsing digital output script table [ 6.830121] intel8x0_measure_ac97_clock: measured 59891 usecs (11 samples) [ 6.830127] intel8x0: measured clock 183 rejected [ 6.840471] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 0) [ 6.840479] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 6.840486] [drm] nouveau 0000:01:00.0: 0xE035: Parsing digital output script table [ 6.840501] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [ 7.210216] intel8x0_measure_ac97_clock: measured 53764 usecs (2591 samples) [ 7.210223] intel8x0: clocking to 48000 [ 8.703713] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 0 Get 0x10000000 Put 0x0000fdc0 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000 [ 8.704276] Console: switching to colour frame buffer device 175x65 [ 10.553368] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 0 Get 0x10000000 Put 0x00010048 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000 [ 12.402789] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 0 Get 0x10000000 Put 0x000101c8 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000 [ 14.252200] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 0 Get 0x10000000 Put 0x000103cc State 0xc0000000 (err: MEM_FAULT) Push 0x00000000 [ 14.260058] [drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon [ 14.260058] fb0: nouveaufb frame buffer device [ 14.260058] drm: registered panic notifier [ 16.136685] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 0 Get 0x10000000 Put 0x000106e4 State 0xc0000000 (err: MEM_FAULT) Push 0x00000000 [ 16.136938] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 16.785104] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 16.910534] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 17.009608] loop: module loaded [ 18.890365] Adding 2928636k swap on /dev/mapper/data-swap. Priority:-1 extents:1 across:2928636k [ 19.286767] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 19.322467] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 19.359012] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 20.641126] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.439387] wlan0: authenticate with 58:6d:8f:39:d9:e8 (try 1) [ 21.442557] wlan0: authenticated [ 21.451845] wlan0: associate with 58:6d:8f:39:d9:e8 (try 1) [ 21.454239] wlan0: RX AssocResp from 58:6d:8f:39:d9:e8 (capab=0x411 status=0 aid=1) [ 21.454247] wlan0: associated [ 21.454255] wlan0: moving STA 58:6d:8f:39:d9:e8 to state 1 [ 21.454261] wlan0: moving STA 58:6d:8f:39:d9:e8 to state 2 [ 21.455075] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.523238] wlan0: moving STA 58:6d:8f:39:d9:e8 to state 3 [ 32.360072] wlan0: no IPv6 routers present [ 36.646456] XENBUS: Unable to read cpu state [ 36.652141] XENBUS: Unable to read cpu state