|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] debug hypervissor based cpufreq xen-4.1
I think thart is because the uuid is incorrect. The uuid changes when the server is restarted. You can see the uuid with the command: xe host-cpu-list Leonardo Em 8 de março de 2012 19:07, Dimitar Kazakov <the.kazak@xxxxxxxxx> escreveu: > Hi, > I am trying to use hypervissor based cpufreq, but unfortunately it doesn't > work for me. > > xenpm get-cpufreq-para returns this: > [CPU0] failed to get cpufreq parameter > [CPU1] failed to get cpufreq parameter > [CPU2] failed to get cpufreq parameter > [CPU3] failed to get cpufreq parameter > [CPU4] failed to get cpufreq parameter > [CPU5] failed to get cpufreq parameter > [CPU6] failed to get cpufreq parameter > [CPU7] failed to get cpufreq parameter > > How could I debug hypervissor based cpufreq in order to see what the problem > is? Tried with cpufreq=verbose, but there is no any output regarding cpufreq > in xm dmesg. > > I am on Dell PowerEdge III with 2x Xeon E5450 @ 3.00GHz flashed with latest > bios 2.7.0 > > xm dmesg returns this: > __ __ _ _ _ _____ _ > \ \/ /___ _ __ | || | / | |___ / _ __ ___/ | _ __ _ __ ___ > \ // _ \ '_ \ | || |_ | | |_ \ __| '__/ __| |__| '_ \| '__/ _ \ > / \ __/ | | | |__ _|| |_ ___) |__| | | (__| |__| |_) | | | __/ > /_/\_\___|_| |_| |_|(_)_(_)____/ |_| \___|_| | .__/|_| \___| > |_| > (XEN) Xen version 4.1.3-rc1-pre (root@xxxxxxxxxxxxxx) (gcc version 4.6.3 > (Debian 4.6.3-1) ) Thu Mar 8 12:23:01 EET 2012 > (XEN) Latest ChangeSet: Wed Mar 07 10:58:25 2012 +0000 23259:ed5c1ad51a23 > (XEN) Bootloader: GRUB 1.99-14 > (XEN) Command line: placeholder dom0_mem=1024M cpufreq=verbose,xen loglvl=all > guest_loglvl=all > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 00000000000a0000 (usable) > (XEN) 0000000000100000 - 00000000bfb50000 (usable) > (XEN) 00000000bfb50000 - 00000000bfb66000 (reserved) > (XEN) 00000000bfb66000 - 00000000bfb85c00 (ACPI data) > (XEN) 00000000bfb85c00 - 00000000c0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fe000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000440000000 (usable) > (XEN) ACPI: RSDP 000F2160, 0024 (r2 DELL ) > (XEN) ACPI: XSDT 000F21FC, 00CC (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: FACP BFB83524, 00F4 (r3 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: DSDT BFB66000, 4996 (r1 DELL PE_SC3 1 INTL 20050624) > (XEN) ACPI: FACS BFB85C00, 0040 > (XEN) ACPI: APIC BFB83078, 0092 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SPCR BFB83130, 0050 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HPET BFB83184, 0038 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: MCFG BFB831C0, 003C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: WD__ BFB83200, 0134 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SLIC BFB83338, 0024 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: ERST BFB6E2DC, 0210 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: HEST BFB6E4EC, 027C (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: BERT BFB6E15C, 0030 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: EINJ BFB6E18C, 0150 (r1 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: TCPA BFB834BC, 0064 (r2 DELL PE_SC3 1 DELL 1) > (XEN) ACPI: SSDT BFB6A996, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6B03C, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6B6E2, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6BD88, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6C42E, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6CAD4, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6D17A, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6D820, 0496 (r1 DELL PE_SC3 11 INTL 20050624) > (XEN) ACPI: SSDT BFB6DEC6, 0293 (r1 DELL PE_SC3 10 INTL 20050624) > (XEN) System RAM: 16378MB (16772032kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000440000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000fe710 > (XEN) DMI 2.5 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[bfb85c0c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > (XEN) Processor #4 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) > (XEN) Processor #6 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) > (XEN) Processor #1 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > (XEN) Processor #3 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > (XEN) Processor #7 7:7 APIC version 20 > (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: MCFG area at e0000000 reserved in E820 > (XEN) ERST table is invalid > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2992.597 MHz processor. > (XEN) Initing memory sharing. > (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 0 firstbank 1 > extended MCE MSR 0 > (XEN) Intel machine check reporting enabled > (XEN) I/O virtualisation disabled > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Platform timer is 14.318MHz HPET > (XEN) Allocated console ring of 64 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: ASIDs disabled. > (XEN) HVM: VMX enabled > (XEN) Brought up 8 CPUs > (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x199e000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000430000000->0000000432000000 (246218 pages to be > allocated) > (XEN) Init. ramdisk: 000000043e1ca000->0000000440000000 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff8199e000 > (XEN) Init. ramdisk: ffffffff8199e000->ffffffff837d4000 > (XEN) Phys-Mach map: ffffffff837d4000->ffffffff839d4000 > (XEN) Start info: ffffffff839d4000->ffffffff839d44b4 > (XEN) Page tables: ffffffff839d5000->ffffffff839f6000 > (XEN) Boot stack: ffffffff839f6000->ffffffff839f7000 > (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 > (XEN) ENTRY ADDRESS: ffffffff816ff200 > (XEN) Dom0 has maximum 8 VCPUs > (XEN) Scrubbing Free RAM: > .......................................................................................................................................................done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen) > (XEN) Freed 216kB init memory. > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:02.0 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:04.0 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:06.0 > (XEN) PCI add device 00:07.0 > (XEN) PCI add device 00:10.0 > (XEN) PCI add device 00:10.1 > (XEN) PCI add device 00:10.2 > (XEN) PCI add device 00:11.0 > (XEN) PCI add device 00:13.0 > (XEN) PCI add device 00:15.0 > (XEN) PCI add device 00:16.0 > (XEN) PCI add device 00:1c.0 > (XEN) PCI add device 00:1d.0 > (XEN) PCI add device 00:1d.1 > (XEN) PCI add device 00:1d.2 > (XEN) PCI add device 00:1d.7 > (XEN) PCI add device 00:1e.0 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 00:1f.1 > (XEN) PCI add device 04:00.0 > (XEN) PCI add device 04:00.3 > (XEN) PCI add device 05:00.0 > (XEN) PCI add device 05:01.0 > (XEN) PCI add device 06:00.0 > (XEN) PCI add device 07:00.0 > (XEN) PCI add device 01:00.0 > (XEN) PCI add device 02:00.0 > (XEN) PCI add device 03:00.0 > (XEN) PCI add device 0e:0d.0 > (XEN) physdev.c:164: dom0: wrong map_pirq type 3 > > > Regards, > Dimitar Kazakov > > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxx > http://lists.xen.org/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |