[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] problem with USB and IRQs not being selected properly


  • To: xen-users@xxxxxxxxxxxxx
  • From: Nick Podolak <sur4die@xxxxxxxxx>
  • Date: Wed, 7 Mar 2012 17:46:34 -0500
  • Delivery-date: Fri, 16 Mar 2012 15:35:12 +0000
  • List-id: Xen user discussion <xen-users.lists.xen.org>

I'm trying to boot xen using every possible distribution I can find but without any luck. ÂThe platform that I'm on is a headless embedded PC that is, as far as I can tell, not mapping dom0 IRQs properly when the xen hypervisor is loaded. ÂThis is a particular problem for my USB ports, which happen to be where my boot drive is connected. ÂSo without my boot drive I have no joy.

Any ideas how to get this box booting with xen?

This is a dump from a debian wheezy install, but I get just about the same thing with squeeze, centos 6.2, ubuntu 11.04 and 11.10


ÂBooting a command list

Loading Xen 4.1-amd64 ...
Loading Linux 3.2.0-1-amd64 ...
Loading initial ramdisk ...
error: Can't get controller info..
(XEN) Xen version 4.1.2 (Debian 4.1.2-2) (waldi@xxxxxxxxxx) (gcc version 4.6.2 (Debian 4.6.2-6) ) Sat Dec 10 19:58:21 UTC 201
(XEN) Bootloader: GRUB 1.99-14
(XEN) Command line: placeholder com1=19200,8n1 console=com1
(XEN) Video information:
(XEN) ÂNo VGA detected
(XEN) Disc information:
(XEN) ÂFound 1 MBR signatures
(XEN) ÂFound 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) Â0000000000000000 - 000000000009cc00 (usable)
(XEN) Â000000000009cc00 - 00000000000a0000 (reserved)
(XEN) Â00000000000f0000 - 0000000000100000 (reserved)
(XEN) Â0000000000100000 - 000000003ffe0000 (usable)
(XEN) Â000000003ffe0000 - 0000000080000000 (reserved)
(XEN) Â00000000fec00000 - 00000000fec01000 (reserved)
(XEN) Â00000000fee00000 - 00000000fee01000 (reserved)
(XEN) Â00000000fff00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048048kB)
(XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
(XEN) Domain heap initialised
(XEN) Table is not found!
(XEN) Processor #0 6:6 APIC version 20
(XEN) Processor #1 6:6 APIC version 20
(XEN) Enabling APIC mode: ÂFlat. ÂUsing 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1000.021 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) Â-> Using new ACK method
(XEN) Platform timer is 1.193MHz PIT
ï(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) Â- APIC TPR shadow
(XEN) Â- Virtual NMI
(XEN) Â- MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) ÂXen Âkernel: 64-bit, lsb, compat32
(XEN) ÂDom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x193a000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) ÂDom0 alloc.: Â 000000003a000000->000000003c000000 (226461 pages to be allocated)
(XEN) ÂInit. ramdisk: 000000003dd04000->000000003f9ffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) ÂLoaded kernel: ffffffff81000000->ffffffff8193a000
(XEN) ÂInit. ramdisk: ffffffff8193a000->ffffffff83635a00
(XEN) ÂPhys-Mach map: ffffffff83636000->ffffffff8380ecc8
(XEN) ÂStart info: Â Âffffffff8380f000->ffffffff8380f4b4
(XEN) ÂPage tables: Â ffffffff83810000->ffffffff83831000
(XEN) ÂBoot stack: Â Âffffffff83831000->ffffffff83832000
(XEN) ÂTOTAL: Â Â Â Â ffffffff80000000->ffffffff83c00000
(XEN) ÂENTRY ADDRESS: ffffffff816a9200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 216kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ Â Â0.000000] Initializing cgroup subsys cpuset
[ Â Â0.000000] Initializing cgroup subsys cpu
[ Â Â0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.6-1) (ben@xxxxxxxxxxxxxxx) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 2
[ Â Â0.000000] Command line: placeholder root=UUID=d84ae811-f2a1-43a1-a34c-47e98b4fd891 ro console=hvc0 earlyprintk=xen
[ Â Â0.000000] Freeing Â9c-100 pfn range: 100 pages freed
[ Â Â0.000000] Released 100 pages of unused memory
[ Â Â0.000000] Set 786564 page(s) to 1-1 mapping
[ Â Â0.000000] BIOS-provided physical RAM map:
[ Â Â0.000000] ÂXen: 0000000000000000 - 000000000009c000 (usable)
[ Â Â0.000000] ÂXen: 000000000009cc00 - 0000000000100000 (reserved)
[ Â Â0.000000] ÂXen: 0000000000100000 - 000000003ffe0000 (usable)
[ Â Â0.000000] ÂXen: 000000003ffe0000 - 0000000080000000 (reserved)
[ Â Â0.000000] ÂXen: 00000000fec00000 - 00000000fec01000 (reserved)
[ Â Â0.000000] ÂXen: 00000000fee00000 - 00000000fee01000 (reserved)
[ Â Â0.000000] ÂXen: 00000000fff00000 - 0000000100000000 (reserved)
[ Â Â0.000000] bootconsole [xenboot0] enabled
[ Â Â0.000000] NX (Execute Disable) protection: active
[ Â Â0.000000] DMI not present or invalid.
[ Â Â0.000000] No AGP bridge found
[ Â Â0.000000] last_pfn = 0x3ffe0 max_arch_pfn = 0x400000000
[ Â Â0.000000] found SMP MP-table at [ffff8800000fe100] fe100
[ Â Â0.000000] init_memory_mapping: 0000000000000000-000000003ffe0000
[ Â Â0.000000] RAMDISK: 0193a000 - 03636000
[ Â Â0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[ Â Â0.000000] No NUMA configuration found
[ Â Â0.000000] Faking a node at 0000000000000000-000000003ffe0000
[ Â Â0.000000] Initmem setup node 0 0000000000000000-000000003ffe0000
[ Â Â0.000000] Â NODE_DATA [000000003b194000 - 000000003b198fff]
[ Â Â0.000000] Zone PFN ranges:
[ Â Â0.000000] Â DMA Â Â Â0x00000010 -> 0x00001000
[ Â Â0.000000] Â DMA32 Â Â0x00001000 -> 0x00100000
[  Â0.000000]  Normal  empty
[ Â Â0.000000] Movable zone start PFN for each node
[ Â Â0.000000] early_node_map[2] active PFN ranges
[ Â Â0.000000] Â Â 0: 0x00000010 -> 0x0000009c
[ Â Â0.000000] Â Â 0: 0x00000100 -> 0x0003ffe0
[ Â Â0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ Â Â0.000000] Intel MultiProcessor Specification v1.4
[ Â Â0.000000] MPTABLE: OEM ID: SoekrisÂ
[ Â Â0.000000] MPTABLE: Product ID: net6501 Â ÂÂ
[ Â Â0.000000] MPTABLE: APIC at: 0xFEE00000
[ Â Â0.000000] Processor #0 (Bootup-CPU)
[ Â Â0.000000] Processor #1
[ Â Â0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255
[ Â Â0.000000] Processors: 2
[ Â Â0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ Â Â0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ Â Â0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000
[ Â Â0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ Â Â0.000000] Booting paravirtualized kernel on Xen
[ Â Â0.000000] Xen version: 4.1.2 (preserve-AD)
[ Â Â0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ Â Â0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003b124000 s82304 r8192 d24192 u114688
[ Â Â0.000000] Built 1 zonelists in Node order, mobility grouping on. ÂTotal pages: 257929
[ Â Â0.000000] Policy zone: DMA32
[ Â Â0.000000] Kernel command line: placeholder root=UUID=d84ae811-f2a1-43a1-a34c-47e98b4fd891 ro console=hvc0 earlyprintk=xn
[ Â Â0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ Â Â0.000000] Placing 64MB software IO TLB between ffff880035800000 - ffff880039800000
[ Â Â0.000000] software IO TLB at phys 0x35800000 - 0x39800000
[ Â Â0.000000] Memory: 845060k/1048448k available (3368k kernel code, 464k absent, 202924k reserved, 3361k data, 568k init)
[ Â Â0.000000] Hierarchical RCU implementation.
[ Â Â0.000000] ÂRCU dyntick-idle grace-period acceleration is enabled.
[ Â Â0.000000] NR_IRQS:33024 nr_irqs:512 16
[ Â Â0.000000] Console: colour dummy device 80x25
[ Â Â0.000000] console [hvc0] enabled, bootconsole disabled
[ Â Â0.000000] console [hvc0] enabled, bootconsole disabled
[ Â Â0.000000] installing Xen timer for CPU 0
[ Â Â0.000000] Detected 1000.021 MHz processor.
[ Â Â0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000084)
[ Â Â0.004000] pid_max: default: 32768 minimum: 301
[ Â Â0.004000] Security Framework initialized
[ Â Â0.004000] AppArmor: AppArmor disabled by boot time parameter
[ Â Â0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ Â Â0.006753] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ Â Â0.008071] Mount-cache hash table entries: 256
[ Â Â0.009119] Initializing cgroup subsys cpuacct
[ Â Â0.009176] Initializing cgroup subsys memory
[ Â Â0.009282] Initializing cgroup subsys devices
[ Â Â0.009317] Initializing cgroup subsys freezer
[ Â Â0.009370] Initializing cgroup subsys net_cls
[ Â Â0.009403] Initializing cgroup subsys blkio
[ Â Â0.009807] CPU: Physical Processor ID: 0
[ Â Â0.009836] CPU: Processor Core ID: 0
[ Â Â0.013693] Performance Events: unsupported p6 CPU model 38 no PMU driver, software events only.
[ Â Â0.014916] NMI watchdog disabled (cpu0): hardware events not enabled
[ Â Â0.016145] installing Xen timer for CPU 1
[ Â Â0.004000] Disabled fast string operations
[ Â Â0.017143] NMI watchdog disabled (cpu1): hardware events not enabled
[ Â Â0.017431] Brought up 2 CPUs
[ Â Â0.018023] devtmpfs: initialized
[ Â Â0.036406] Grant table initialized
[ Â Â0.037058] print_constraints: dummy:Â
[ Â Â0.037724] NET: Registered protocol family 16
[ Â Â0.040591] PCI: Using configuration type 1 for base access
[ Â Â0.045820] bio: create slab <bio-0> at 0
[ Â Â0.048528] ACPI: Interpreter disabled.
[ Â Â0.048663] xen/balloon: Initialising balloon driver.
[ Â Â0.050154] xen-balloon: Initialising balloon driver.
[ Â Â0.050758] vgaarb: loaded
[ Â Â0.052049] PCI: Probing PCI hardware
[ Â Â0.058771] pci 0000:00:17.0: PCI bridge to [bus 01-02]
[ Â Â0.084454] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ Â Â0.085926] pci 0000:00:18.0: PCI bridge to [bus 03-07]
[ Â Â0.089200] pci 0000:03:00.0: PCI bridge to [bus 04-07]
[ Â Â0.091229] pci 0000:04:02.0: PCI bridge to [bus 05-05]
[ Â Â0.092410] pci 0000:04:03.0: PCI bridge to [bus 06-06]
[ Â Â0.094318] pci 0000:04:04.0: PCI bridge to [bus 07-07]
[ Â Â0.095860] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
[ Â Â0.098982] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
[ Â Â0.101040] pci 0000:09:02.0: PCI bridge to [bus 0a-0a]
[ Â Â0.103055] pci 0000:09:03.0: PCI bridge to [bus 0b-0b]
[ Â Â0.103572] pci 0000:09:04.0: PCI bridge to [bus 0c-0c]
[ Â Â0.104005] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d]
[ Â Â0.121375] pci 0000:00:1f.0: default IRQ router [8086:8186]
[ Â Â0.125105] Switching to clocksource xen
[ Â Â0.144478] pnp: PnP ACPI: disabled
[ Â Â0.176712] pci 0000:02:00.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
[ Â Â0.176823] pci 0000:02:06.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref]
[ Â Â0.177735] pci 0000:00:17.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[ Â Â0.177794] pci 0000:01:00.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ Â Â0.177838] pci 0000:01:00.0: BAR 6: assigned [mem 0x80100000-0x8010ffff pref]
[ Â Â0.177920] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ Â Â0.177964] pci 0000:02:06.0: BAR 6: assigned [mem 0x80020000-0x8003ffff pref]
[ Â Â0.178009] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ Â Â0.178055] pci 0000:01:00.0: Â bridge window [io Â0x1000-0x1fff]
[ Â Â0.178120] pci 0000:01:00.0: Â bridge window [mem 0xa0000000-0xa0ffffff]
[ Â Â0.178177] pci 0000:01:00.0: Â bridge window [mem 0x80000000-0x800fffff pref]
[ Â Â0.178254] pci 0000:00:17.0: PCI bridge to [bus 01-02]
[ Â Â0.178297] pci 0000:00:17.0: Â bridge window [io Â0x1000-0x1fff]
[ Â Â0.178360] pci 0000:00:17.0: Â bridge window [mem 0xa0000000-0xa0ffffff]
[ Â Â0.178415] pci 0000:00:17.0: Â bridge window [mem 0x80000000-0x801fffff pref]
[ Â Â0.178496] pci 0000:04:02.0: PCI bridge to [bus 05-05]
[ Â Â0.178541] pci 0000:04:02.0: Â bridge window [io Â0x2000-0x2fff]
[ Â Â0.178604] pci 0000:04:02.0: Â bridge window [mem 0xa1000000-0xa1ffffff]
[ Â Â0.178698] pci 0000:04:03.0: PCI bridge to [bus 06-06]
[ Â Â0.178742] pci 0000:04:03.0: Â bridge window [io Â0x3000-0x3fff]
[ Â Â0.178807] pci 0000:04:03.0: Â bridge window [mem 0xa2000000-0xa2ffffff]
[ Â Â0.178900] pci 0000:04:04.0: PCI bridge to [bus 07-07]
[ Â Â0.178962] pci 0000:04:04.0: Â bridge window [mem 0xa3000000-0xa3ffffff]
[ Â Â0.179054] pci 0000:03:00.0: PCI bridge to [bus 04-07]
[ Â Â0.179098] pci 0000:03:00.0: Â bridge window [io Â0x2000-0x3fff]
[ Â Â0.179161] pci 0000:03:00.0: Â bridge window [mem 0xa1000000-0xa3ffffff]
[ Â Â0.179253] pci 0000:00:18.0: PCI bridge to [bus 03-07]
[ Â Â0.179297] pci 0000:00:18.0: Â bridge window [io Â0x2000-0x3fff]
[ Â Â0.179359] pci 0000:00:18.0: Â bridge window [mem 0xa1000000-0xa3ffffff]
[ Â Â0.179453] pci 0000:09:02.0: PCI bridge to [bus 0a-0a]
[ Â Â0.179497] pci 0000:09:02.0: Â bridge window [io Â0x4000-0x4fff]
[ Â Â0.179561] pci 0000:09:02.0: Â bridge window [mem 0xa4000000-0xa4ffffff]
[ Â Â0.179655] pci 0000:09:03.0: PCI bridge to [bus 0b-0b]
[ Â Â0.179698] pci 0000:09:03.0: Â bridge window [io Â0x5000-0x5fff]
[ Â Â0.179762] pci 0000:09:03.0: Â bridge window [mem 0xa5000000-0xa5ffffff]
[ Â Â0.179855] pci 0000:09:04.0: PCI bridge to [bus 0c-0c]
[ Â Â0.179969] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
[ Â Â0.180013] pci 0000:08:00.0: Â bridge window [io Â0x4000-0x5fff]
[ Â Â0.180086] pci 0000:08:00.0: Â bridge window [mem 0xa4000000-0xa5ffffff]
[ Â Â0.180093] pci 0000:00:19.0: PCI bridge to [bus 08-0c]
[ Â Â0.180093] pci 0000:00:19.0: Â bridge window [io Â0x4000-0x5fff]
[ Â Â0.180093] pci 0000:00:19.0: Â bridge window [mem 0xa4000000-0xa5ffffff]
[ Â Â0.180093] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d]
[ Â Â0.182799] NET: Registered protocol family 2
[ Â Â0.184048] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ Â Â0.190604] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ Â Â0.196436] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ Â Â0.198086] TCP: Hash tables configured (established 131072 bind 65536)
[ Â Â0.198130] TCP reno registered
[ Â Â0.198267] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ Â Â0.198397] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ Â Â0.199339] NET: Registered protocol family 1
[ Â Â0.203008] Unpacking initramfs...
[ Â Â0.512834] Freeing initrd memory: 29680k freed
[ Â Â0.570992] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ Â Â0.574090] audit: initializing netlink socket (disabled)
[ Â Â0.574187] type=2000 audit(1331159610.420:1): initialized
[ Â Â0.660969] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ Â Â0.663848] VFS: Disk quotas dquot_6.5.2
[ Â Â0.664151] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ Â Â0.664854] msgmni has been set to 1708
[ Â Â0.666755] alg: No test for stdrng (krng)
[ Â Â0.667142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ Â Â0.667187] io scheduler noop registered
[ Â Â0.667213] io scheduler deadline registered
[ Â Â0.667435] io scheduler cfq registered (default)
[ Â Â0.678050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ Â Â0.687476] Linux agpgart interface v0.103
[ Â Â0.688787] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ Â Â0.689830] i8042: No controller found
[ Â Â0.690701] mousedev: PS/2 mouse device common for all mice
[ Â Â0.692013] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ Â Â0.692635] rtc_cmos: probe of rtc_cmos failed with error -38
[ Â Â0.694107] TCP cubic registered
[ Â Â0.694733] NET: Registered protocol family 10
[ Â Â0.698297] Mobile IPv6
[ Â Â0.698334] NET: Registered protocol family 17
[ Â Â0.698388] Registering the dns_resolver key type
[ Â Â0.699941] registered taskstats version 1
[ Â Â0.705645] /build/buildd-linux-2.6_3.2.6-1-amd64-AkLxz2/linux-2.6-3.2.6/debian/build/source_amd64_none/drivers/rtc/hctos)
[ Â Â0.706018] Initializing network drop monitor service
[ Â Â0.708671] Freeing unused kernel memory: 568k freed
[ Â Â0.709427] Write protecting the kernel read-only data: 6144k
[ Â Â0.735317] Freeing unused kernel memory: 712k freed
[ Â Â0.739255] Freeing unused kernel memory: 684k freed
Loading, please wait...
[ Â Â1.025163] udevd[50]: starting version 175
[ Â Â1.261060] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ Â Â1.261127] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ Â Â1.261435] e1000e 0000:05:00.0: Disabling ASPM L0sÂ
(XEN) physdev.c:155: dom0: wrong map_pirq type 3
[ Â Â1.418407] pch_gbe: Error: busy bit is not cleared
[ Â Â1.420782] pch_gbe: Error: busy bit is not cleared
[ Â Â1.423026] pch_gbe: Error: busy bit is not cleared
[ Â Â1.432371] e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:45:34
[ Â Â1.432439] e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ Â Â1.432579] e1000e 0000:05:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ Â Â1.432771] e1000e 0000:06:00.0: Disabling ASPM L0sÂ
[ Â Â1.490801] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe 0000:02:00.1: PHY initialize error
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.492377] pch_gbe: pch-gbe.miim won't go Ready
[ Â Â1.906164] e1000e 0000:06:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:45:35
[ Â Â1.906240] e1000e 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ Â Â1.906391] e1000e 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ Â Â1.906554] e1000e 0000:0a:00.0: Disabling ASPM L0sÂ
[ Â Â1.940364] sdhci: Secure Digital Host Controller Interface driver
[ Â Â1.940427] sdhci: Copyright(c) Pierre Ossman
[ Â Â2.090387] e1000e 0000:0a:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:45:36
[ Â Â2.090467] e1000e 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ Â Â2.090623] e1000e 0000:0a:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ Â Â2.090775] e1000e 0000:0b:00.0: Disabling ASPM L0sÂ
[ Â Â2.141897] SCSI subsystem initialized
[ Â Â2.317445] e1000e 0000:0b:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:00:24:ce:45:37
[ Â Â2.317535] e1000e 0000:0b:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ Â Â2.317686] e1000e 0000:0b:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ Â Â2.391486] pch_gbe: probe of 0000:02:00.1 failed with error -11
[ Â Â2.391747] sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 1)
[ Â Â2.391938] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems.
[ Â Â2.392598] sdhci-pci: probe of 0000:02:04.0 failed with error -38
[ Â Â2.392749] sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 1)
[ Â Â2.392926] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems.
[ Â Â2.393366] sdhci-pci: probe of 0000:02:04.1 failed with error -38
[ Â Â2.395029] ahci: SSS flag set, parallel bus scan disabled
[ Â Â2.395243] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ Â Â2.395322] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part cccÂ
[ Â Â2.422196] scsi0 : ahci
[ Â Â2.429559] scsi1 : ahci
[ Â Â2.435637] ata1: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004500 irq 296
[ Â Â2.435721] ata2: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004580 irq 296
[ Â Â2.438386] usbcore: registered new interface driver usbfs
[ Â Â2.438711] usbcore: registered new interface driver hub
[ Â Â2.439315] usbcore: registered new device driver usb
[ Â Â2.442742] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ Â Â2.443239] ehci_hcd 0000:02:02.3: EHCI Host Controller
[ Â Â2.443515] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1
[ Â Â2.464422] ehci_hcd 0000:02:02.3: request interrupt 9 failed
[ Â Â2.464501] ehci_hcd 0000:02:02.3: USB bus 1 deregistered
[ Â Â2.488888] ehci_hcd 0000:02:02.3: init 0000:02:02.3 fail, -38
[ Â Â2.488999] ehci_hcd: probe of 0000:02:02.3 failed with error -38
[ Â Â2.489392] ehci_hcd 0000:02:08.3: EHCI Host Controller
[ Â Â2.489671] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 1
[ Â Â2.512403] ehci_hcd 0000:02:08.3: request interrupt 10 failed
[ Â Â2.512498] ehci_hcd 0000:02:08.3: USB bus 1 deregistered
[ Â Â2.536921] ehci_hcd 0000:02:08.3: init 0000:02:08.3 fail, -38
[ Â Â2.537031] ehci_hcd: probe of 0000:02:08.3 failed with error -38
[ Â Â2.547167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ Â Â2.547651] ohci_hcd 0000:02:02.0: OHCI Host Controller
[ Â Â2.547941] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 1
[ Â Â2.548290] ohci_hcd 0000:02:02.0: request interrupt 9 failed
[ Â Â2.548363] ohci_hcd 0000:02:02.0: USB bus 1 deregistered
[ Â Â2.568481] ohci_hcd 0000:02:02.0: init 0000:02:02.0 fail, -38
[ Â Â2.568590] ohci_hcd: probe of 0000:02:02.0 failed with error -38
[ Â Â2.568991] ohci_hcd 0000:02:02.1: OHCI Hosdone.
Gave up waiting for root device. ÂCommon problems:
Â- Boot args (cat /proc/cmdline)
 Â- Check rootdelay= (did the system wait long enough?)
 Â- Check root= (did the system wait for the right device?)
Â- Missing modules (cat /proc/modules; ls /dev)
ALERT! Â/dev/disk/by-uuid/d84ae811-f2a1-43a1-a34c-47e98b4fd891 does not exist. ÂDropping to a shell!
modprobe: module i8042 not found in modules.dep
modprobe: module atkbd not found in modules.dep
[ Â 36.153429] uhci_hcd: USB Universal Host Controller Interface driver
[ Â 36.207152] usbcore: registered new interface driver usbhid
[ Â 36.207210] usbhid: USB HID core driver


BusyBox v1.19.3 (Debian 1:1.19.3-5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
(initramfs)
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.