[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.0-rc7-xen-teo.en.ming-sgp (root@ubuntu-1110-amd64-desktop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Wed Mar 14 15:49:31 SGT 2012 [ 0.000000] Command line: placeholder root=UUID=fd1ee157-7822-4a08-8549-56f4ae96f0dc dom0_mem=1024 console=tty quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed [ 0.000000] 1-1 mapping on 9e->100 [ 0.000000] Freeing bd67f-bd98e pfn range: 783 pages freed [ 0.000000] 1-1 mapping on bd67f->bd98e [ 0.000000] Freeing bdb00-100000 pfn range: 271616 pages freed [ 0.000000] 1-1 mapping on bdb00->100000 [ 0.000000] Released 272497 pages of unused memory [ 0.000000] Set 272497 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000bd67f000 (usable) [ 0.000000] Xen: 00000000bd67f000 - 00000000bd702000 (ACPI NVS) [ 0.000000] Xen: 00000000bd702000 - 00000000bd82a000 (reserved) [ 0.000000] Xen: 00000000bd82a000 - 00000000bd83e000 (ACPI NVS) [ 0.000000] Xen: 00000000bd83e000 - 00000000bd943000 (reserved) [ 0.000000] Xen: 00000000bd943000 - 00000000bd94b000 (ACPI data) [ 0.000000] Xen: 00000000bd94b000 - 00000000bd966000 (ACPI NVS) [ 0.000000] Xen: 00000000bd966000 - 00000000bd988000 (reserved) [ 0.000000] Xen: 00000000bd988000 - 00000000bd98e000 (ACPI NVS) [ 0.000000] Xen: 00000000bd98e000 - 00000000bdb00000 (usable) [ 0.000000] Xen: 00000000bdc00000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000001bc000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: /DQ45CB, BIOS CBQ4510H.86A.0093.2009.0724.1353 07/24/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x1bc000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xbdb00 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 047fe000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdb00000 [ 0.000000] 0000000000 - 00bdb00000 page 4k [ 0.000000] kernel direct mapping tables up to bdb00000 @ a0e000-1000000 [ 0.000000] xen: setting RW the range fce000 - 1000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001bc000000 [ 0.000000] 0100000000 - 01bc000000 page 4k [ 0.000000] kernel direct mapping tables up to 1bc000000 @ bc897000-bd67f000 [ 0.000000] xen: setting RW the range bce7a000 - bd67f000 [ 0.000000] RAMDISK: 02330000 - 047fe000 [ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000bd949e18 0005C (v01 INTEL DQ45CB 0000005D MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bd948d98 000F4 (v04 INTEL A M I 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120111/tbfadt-382) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBD94CF40/0x00000000BD951F40, using 32 (20120111/tbfadt-502) [ 0.000000] ACPI: DSDT 00000000bd943018 04B53 (v01 INTEL DQ45CB 0000005D INTL 20051117) [ 0.000000] ACPI: FACS 00000000bd94cf40 00040 [ 0.000000] ACPI: APIC 00000000bd948f18 0006C (v02 INTEL DQ45CB 0000005D MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000bd953e18 0003C (v01 INTEL DQ45CB 0000005D MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000bd952d18 000A0 (v32 INTEL DQ45CB 0000005D TFSM 000F4240) [ 0.000000] ACPI: SPCR 00000000bd953d98 00050 (v01 INTEL DQ45CB 0000005D AMI. 00000003) [ 0.000000] ACPI: TCPA 00000000bd953d18 00032 (v02 INTEL DQ45CB 0000005D MSFT 01000013) [ 0.000000] ACPI: XMAR 00000000bd701d98 00120 (v01 INTEL DQ45CB 0000005D INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001bc000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001bc000000 [ 0.000000] NODE_DATA [000000016c33d000 - 000000016c341fff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001bc000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd67f [ 0.000000] 0: 0x000bd98e -> 0x000bdb00 [ 0.000000] 0: 0x00100000 -> 0x001bc000 [ 0.000000] On node 0 totalpages: 1546111 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1477 pages reserved [ 0.000000] DMA zone: 2441 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 755761 pages, LIFO batch:31 [ 0.000000] Normal zone: 12032 pages used for memmap [ 0.000000] Normal zone: 758016 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd67f000 - 00000000bd702000 [ 0.000000] PM: Registered nosave memory: 00000000bd702000 - 00000000bd82a000 [ 0.000000] PM: Registered nosave memory: 00000000bd82a000 - 00000000bd83e000 [ 0.000000] PM: Registered nosave memory: 00000000bd83e000 - 00000000bd943000 [ 0.000000] PM: Registered nosave memory: 00000000bd943000 - 00000000bd94b000 [ 0.000000] PM: Registered nosave memory: 00000000bd94b000 - 00000000bd966000 [ 0.000000] PM: Registered nosave memory: 00000000bd966000 - 00000000bd988000 [ 0.000000] PM: Registered nosave memory: 00000000bd988000 - 00000000bd98e000 [ 0.000000] PM: Registered nosave memory: 00000000bdb00000 - 00000000bdc00000 [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.3-rc1-pre (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88016c294000 s82368 r8192 d24128 u114688 [ 0.000000] pcpu-alloc: s82368 r8192 d24128 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1516218 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=fd1ee157-7822-4a08-8549-56f4ae96f0dc dom0_mem=1024 console=tty quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff880161a00000 - ffff880165a00000 [ 0.000000] software IO TLB at phys 0x161a00000 - 0x165a00000 [ 0.000000] Memory: 4634860k/7274496k available (6318k kernel code, 1090052k absent, 1549584k reserved, 6778k data, 896k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 25165824 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2800.168 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.33 BogoMIPS (lpj=11200672) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.007462] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009390] Mount-cache hash table entries: 256 [ 0.009596] Initializing cgroup subsys cpuacct [ 0.009600] Initializing cgroup subsys memory [ 0.009615] Initializing cgroup subsys devices [ 0.009618] Initializing cgroup subsys freezer [ 0.009620] Initializing cgroup subsys net_cls [ 0.009623] Initializing cgroup subsys blkio [ 0.009635] Initializing cgroup subsys perf_event [ 0.009700] CPU: Physical Processor ID: 0 [ 0.009702] CPU: Processor Core ID: 0 [ 0.012367] ACPI: Core revision 20120111 [ 0.014480] ftrace: allocating 23418 entries in 92 pages [ 0.020094] cpu 0 spinlock event irq 273 [ 0.020121] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.020339] installing Xen timer for CPU 1 [ 0.020350] cpu 1 spinlock event irq 279 [ 0.020480] Brought up 2 CPUs [ 0.020557] devtmpfs: initialized [ 0.020557] PM: Registering ACPI NVS region at bd67f000 (536576 bytes) [ 0.020557] PM: Registering ACPI NVS region at bd82a000 (81920 bytes) [ 0.020557] PM: Registering ACPI NVS region at bd94b000 (110592 bytes) [ 0.020557] PM: Registering ACPI NVS region at bd988000 (24576 bytes) [ 0.020659] Grant tables using version 2 layout. [ 0.020676] Grant table initialized [ 0.020729] print_constraints: dummy: [ 0.020769] RTC time: 15:02:23, date: 03/14/12 [ 0.020802] NET: Registered protocol family 16 [ 0.020885] ACPI: bus type pci registered [ 0.020885] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.020885] PCI: not using MMCONFIG [ 0.020885] PCI: Using configuration type 1 for base access [ 0.020885] bio: create slab at 0 [ 0.020885] ACPI: Added _OSI(Module Device) [ 0.020885] ACPI: Added _OSI(Processor Device) [ 0.020885] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.020885] ACPI: Added _OSI(Processor Aggregator Device) [ 0.024925] ACPI: EC: Look up EC in DSDT [ 0.027158] ACPI: Executed 1 blocks of module-level executable AML code [ 0.029440] ACPI: SSDT 00000000bd94cc18 002CC (v01 AMI IST 00000001 MSFT 03000001) [ 0.030009] ACPI: Dynamic OEM Table Load: [ 0.030013] ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001) [ 0.030257] ACPI: Interpreter enabled [ 0.030263] ACPI: (supports S0 S3 S4 S5) [ 0.030281] ACPI: Using IOAPIC for interrupt routing [ 0.030350] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.030386] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.115676] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.119784] ACPI: No dock devices found. [ 0.119789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.119893] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.119954] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.119956] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.119959] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.119962] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 0.119993] PCI host bridge to bus 0000:00 [ 0.119996] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.119998] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.120001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.120003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] [ 0.120006] pci 0000:00:00.0: [8086:2e10] type 0 class 0x000600 [ 0.120041] pci 0000:00:02.0: [8086:2e12] type 0 class 0x000300 [ 0.120069] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.120087] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.120098] pci 0000:00:02.0: reg 20: [io 0xf220-0xf227] [ 0.120183] pci 0000:00:02.1: [8086:2e13] type 0 class 0x000380 [ 0.120207] pci 0000:00:02.1: reg 10: [mem 0xd0400000-0xd04fffff 64bit] [ 0.120326] pci 0000:00:03.0: [8086:2e14] type 0 class 0x000780 [ 0.120367] pci 0000:00:03.0: reg 10: [mem 0xd0629000-0xd062900f 64bit] [ 0.120511] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.120547] pci 0000:00:03.2: [8086:2e16] type 0 class 0x000101 [ 0.120574] pci 0000:00:03.2: reg 10: [io 0xf210-0xf217] [ 0.120588] pci 0000:00:03.2: reg 14: [io 0xf200-0xf203] [ 0.120602] pci 0000:00:03.2: reg 18: [io 0xf1f0-0xf1f7] [ 0.120614] pci 0000:00:03.2: reg 1c: [io 0xf1e0-0xf1e3] [ 0.120628] pci 0000:00:03.2: reg 20: [io 0xf1d0-0xf1df] [ 0.120728] pci 0000:00:03.3: [8086:2e17] type 0 class 0x000700 [ 0.120757] pci 0000:00:03.3: reg 10: [io 0xf1c0-0xf1c7] [ 0.120774] pci 0000:00:03.3: reg 14: [mem 0xd0628000-0xd0628fff] [ 0.121010] pci 0000:00:19.0: [8086:10de] type 0 class 0x000200 [ 0.121046] pci 0000:00:19.0: reg 10: [mem 0xd0600000-0xd061ffff] [ 0.121062] pci 0000:00:19.0: reg 14: [mem 0xd0627000-0xd0627fff] [ 0.121078] pci 0000:00:19.0: reg 18: [io 0xf0e0-0xf0ff] [ 0.121210] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.121249] pci 0000:00:1a.0: [8086:3a67] type 0 class 0x000c03 [ 0.121335] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 0.121437] pci 0000:00:1a.1: [8086:3a68] type 0 class 0x000c03 [ 0.121523] pci 0000:00:1a.1: reg 20: [io 0xf0a0-0xf0bf] [ 0.121627] pci 0000:00:1a.2: [8086:3a69] type 0 class 0x000c03 [ 0.121713] pci 0000:00:1a.2: reg 20: [io 0xf080-0xf09f] [ 0.121835] pci 0000:00:1a.7: [8086:3a6c] type 0 class 0x000c03 [ 0.121875] pci 0000:00:1a.7: reg 10: [mem 0xd0626000-0xd06263ff] [ 0.122050] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.122101] pci 0000:00:1b.0: [8086:3a6e] type 0 class 0x000403 [ 0.122130] pci 0000:00:1b.0: reg 10: [mem 0xd0620000-0xd0623fff 64bit] [ 0.122273] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.122318] pci 0000:00:1d.0: [8086:3a64] type 0 class 0x000c03 [ 0.122404] pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f] [ 0.122505] pci 0000:00:1d.1: [8086:3a65] type 0 class 0x000c03 [ 0.122592] pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f] [ 0.122694] pci 0000:00:1d.2: [8086:3a66] type 0 class 0x000c03 [ 0.122781] pci 0000:00:1d.2: reg 20: [io 0xf020-0xf03f] [ 0.122900] pci 0000:00:1d.7: [8086:3a6a] type 0 class 0x000c03 [ 0.122939] pci 0000:00:1d.7: reg 10: [mem 0xd0625000-0xd06253ff] [ 0.123114] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.123154] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.123285] pci 0000:00:1f.0: [8086:3a14] type 0 class 0x000601 [ 0.123496] pci 0000:00:1f.2: [8086:3a00] type 0 class 0x000101 [ 0.123528] pci 0000:00:1f.2: reg 10: [io 0xf1b0-0xf1b7] [ 0.123544] pci 0000:00:1f.2: reg 14: [io 0xf1a0-0xf1a3] [ 0.123559] pci 0000:00:1f.2: reg 18: [io 0xf190-0xf197] [ 0.123575] pci 0000:00:1f.2: reg 1c: [io 0xf180-0xf183] [ 0.123591] pci 0000:00:1f.2: reg 20: [io 0xf170-0xf17f] [ 0.123607] pci 0000:00:1f.2: reg 24: [io 0xf160-0xf16f] [ 0.123705] pci 0000:00:1f.3: [8086:3a60] type 0 class 0x000c05 [ 0.123735] pci 0000:00:1f.3: reg 10: [mem 0xd0624000-0xd06240ff 64bit] [ 0.123778] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.123846] pci 0000:00:1f.5: [8086:3a06] type 0 class 0x000101 [ 0.123878] pci 0000:00:1f.5: reg 10: [io 0xf150-0xf157] [ 0.123893] pci 0000:00:1f.5: reg 14: [io 0xf140-0xf143] [ 0.123909] pci 0000:00:1f.5: reg 18: [io 0xf130-0xf137] [ 0.123925] pci 0000:00:1f.5: reg 1c: [io 0xf120-0xf123] [ 0.123941] pci 0000:00:1f.5: reg 20: [io 0xf110-0xf11f] [ 0.123956] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f] [ 0.124007] pci 0000:01:01.0: [11c1:5811] type 0 class 0x000c00 [ 0.124007] pci 0000:01:01.0: reg 10: [mem 0xd0501000-0xd0501fff] [ 0.124007] pci 0000:01:01.0: reg 14: [mem 0xd0500000-0xd05000ff] [ 0.124018] pci 0000:01:01.0: supports D1 D2 [ 0.124021] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot [ 0.124106] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.124116] pci 0000:00:1e.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.124126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.124129] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.124131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.124134] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 0.124149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.124234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.124385] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.124494] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.131121] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.131173] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.131225] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.131275] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.131328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.131378] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.131429] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.131480] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.131518] xen/balloon: Initialising balloon driver. [ 0.140965] xen-balloon: Initialising balloon driver. [ 0.141013] xen/balloon: Xen selfballooning driver disabled for domain0. [ 0.141132] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.141132] vgaarb: loaded [ 0.141132] vgaarb: bridge control possible 0000:00:02.0 [ 0.141132] SCSI subsystem initialized [ 0.141132] libata version 3.00 loaded. [ 0.141132] usbcore: registered new interface driver usbfs [ 0.141132] usbcore: registered new interface driver hub [ 0.141132] usbcore: registered new device driver usb [ 0.141132] PCI: Using ACPI for IRQ routing [ 0.144008] PCI: pci_cache_line_size set to 64 bytes [ 0.144008] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.144008] reserve RAM buffer: 00000000bd67f000 - 00000000bfffffff [ 0.144008] reserve RAM buffer: 00000000bdb00000 - 00000000bfffffff [ 0.144084] NetLabel: Initializing [ 0.144086] NetLabel: domain hash size = 128 [ 0.144088] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.144104] NetLabel: unlabeled traffic allowed by default [ 0.144132] Switching to clocksource xen [ 0.151260] AppArmor: AppArmor Filesystem Enabled [ 0.151293] pnp: PnP ACPI init [ 0.151314] ACPI: bus type pnp registered [ 0.151404] pnp 00:00: [bus 00-ff] [ 0.151406] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.151409] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.151411] pnp 00:00: [io 0x0d00-0xffff window] [ 0.151413] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.151416] pnp 00:00: [mem 0x00000000 window] [ 0.151418] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 0.151478] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.151508] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.151510] pnp 00:01: [mem 0xfed08000-0xfed08fff] [ 0.151512] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.151570] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.151573] system 00:01: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.151576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.151580] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.151739] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.151742] pnp 00:02: [io 0x0a20-0x0a3f] [ 0.151744] pnp 00:02: [io 0x0a00-0x0a1f] [ 0.151746] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.151749] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.151751] pnp 00:02: [io 0x0b78-0x0b7f] [ 0.151753] pnp 00:02: [io 0x0f78-0x0f7f] [ 0.151797] system 00:02: [io 0x0a20-0x0a3f] has been reserved [ 0.151800] system 00:02: [io 0x0a00-0x0a1f] has been reserved [ 0.151802] system 00:02: [io 0x0b78-0x0b7f] has been reserved [ 0.151805] system 00:02: [io 0x0f78-0x0f7f] has been reserved [ 0.151808] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151999] pnp 00:03: [io 0x03f8-0x03ff] [ 0.152004] xen: registering gsi 4 triggering 1 polarity 0 [ 0.152010] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 0.152012] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.152022] pnp 00:03: [irq 4] [ 0.152025] pnp 00:03: [dma 0 disabled] [ 0.152112] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.152172] pnp 00:04: [dma 4] [ 0.152175] pnp 00:04: [io 0x0000-0x000f] [ 0.152177] pnp 00:04: [io 0x0081-0x0083] [ 0.152179] pnp 00:04: [io 0x0087] [ 0.152181] pnp 00:04: [io 0x0089-0x008b] [ 0.152183] pnp 00:04: [io 0x008f] [ 0.152185] pnp 00:04: [io 0x00c0-0x00df] [ 0.152213] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.152228] pnp 00:05: [io 0x0070-0x0071] [ 0.152230] xen: registering gsi 8 triggering 1 polarity 0 [ 0.152233] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.152235] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.152240] pnp 00:05: [irq 8] [ 0.152265] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.152275] pnp 00:06: [io 0x0061] [ 0.152303] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.152320] pnp 00:07: [io 0x0010-0x001f] [ 0.152322] pnp 00:07: [io 0x0022-0x003f] [ 0.152324] pnp 00:07: [io 0x0044-0x005f] [ 0.152326] pnp 00:07: [io 0x0062-0x0063] [ 0.152328] pnp 00:07: [io 0x0065-0x006f] [ 0.152330] pnp 00:07: [io 0x0072-0x007f] [ 0.152332] pnp 00:07: [io 0x0080] [ 0.152334] pnp 00:07: [io 0x0084-0x0086] [ 0.152336] pnp 00:07: [io 0x0088] [ 0.152338] pnp 00:07: [io 0x008c-0x008e] [ 0.152341] pnp 00:07: [io 0x0090-0x009f] [ 0.152343] pnp 00:07: [io 0x00a2-0x00bf] [ 0.152345] pnp 00:07: [io 0x00e0-0x00ef] [ 0.152347] pnp 00:07: [io 0x04d0-0x04d1] [ 0.152399] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.152403] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.152413] pnp 00:08: [io 0x00f0-0x00ff] [ 0.152415] xen: registering gsi 13 triggering 1 polarity 0 [ 0.152418] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.152420] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.152424] pnp 00:08: [irq 13] [ 0.152451] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.152557] pnp 00:09: [io 0x0400-0x047f] [ 0.152559] pnp 00:09: [io 0x1180-0x119f] [ 0.152561] pnp 00:09: [io 0x0500-0x057f] [ 0.152563] pnp 00:09: [io 0x0060] [ 0.152565] pnp 00:09: [io 0x0064] [ 0.152567] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.152569] pnp 00:09: [mem 0xfec00000-0xfecfffff] [ 0.152571] pnp 00:09: [mem 0xfee00000-0xfee0ffff] [ 0.152574] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.152576] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.152578] pnp 00:09: [mem 0xfed45000-0xfed9ffff] [ 0.152580] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.152628] system 00:09: [io 0x0400-0x047f] has been reserved [ 0.152631] system 00:09: [io 0x1180-0x119f] has been reserved [ 0.152634] system 00:09: [io 0x0500-0x057f] has been reserved [ 0.152637] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.152640] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.152643] system 00:09: [mem 0xfee00000-0xfee0ffff] could not be reserved [ 0.152646] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.152649] system 00:09: [mem 0xfed45000-0xfed9ffff] has been reserved [ 0.152652] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.152655] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.152740] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.152781] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.152921] pnp: PnP ACPI: found 11 devices [ 0.152924] ACPI: ACPI bus type pnp unregistered [ 0.159440] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.159455] PCI: max bus depth: 1 pci_try_num: 2 [ 0.159478] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.159486] pci 0000:00:1e.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.159511] pci 0000:00:1e.0: setting latency timer to 64 [ 0.159516] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.159518] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.159521] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159523] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 0.159526] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.159528] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.159531] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.159533] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159535] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xffffffff] [ 0.159576] NET: Registered protocol family 2 [ 0.160214] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.163170] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.167430] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.167938] TCP: Hash tables configured (established 524288 bind 65536) [ 0.167941] TCP reno registered [ 0.167979] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.168111] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.168275] NET: Registered protocol family 1 [ 0.168301] pci 0000:00:02.0: Boot video device [ 0.168331] xen: registering gsi 16 triggering 0 polarity 1 [ 0.168346] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.168387] xen: registering gsi 21 triggering 0 polarity 1 [ 0.168393] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.168426] xen: registering gsi 18 triggering 0 polarity 1 [ 0.168431] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.168466] xen: registering gsi 18 triggering 0 polarity 1 [ 0.168469] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 0.168471] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.168473] Already setup the GSI :18 [ 1.768065] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 1.768212] xen: registering gsi 23 triggering 0 polarity 1 [ 1.768223] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.768264] xen: registering gsi 19 triggering 0 polarity 1 [ 1.768270] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.768302] xen: registering gsi 18 triggering 0 polarity 1 [ 1.768305] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 1.768307] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.768309] Already setup the GSI :18 [ 1.768342] xen: registering gsi 23 triggering 0 polarity 1 [ 1.768345] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 1.768347] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.768348] Already setup the GSI :23 [ 3.368065] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.368224] PCI: CLS 64 bytes, default 64 [ 3.368282] Trying to unpack rootfs image as initramfs... [ 3.419171] Freeing initrd memory: 37688k freed [ 3.436361] audit: initializing netlink socket (disabled) [ 3.436386] type=2000 audit(1331737347.173:1): initialized [ 3.452289] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.453760] VFS: Disk quotas dquot_6.5.2 [ 3.453812] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.454279] fuse init (API version 7.18) [ 3.454355] msgmni has been set to 9126 [ 3.454740] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.454777] io scheduler noop registered [ 3.454779] io scheduler deadline registered [ 3.454827] io scheduler cfq registered (default) [ 3.454932] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.454949] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.455059] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 3.455065] ACPI: Sleep Button [SLPB] [ 3.455103] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 3.455107] ACPI: Power Button [PWRB] [ 3.455143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 3.455146] ACPI: Power Button [PWRF] [ 3.456372] Event-channel device installed. [ 3.456697] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 3.460505] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.481302] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.498941] xen: registering gsi 17 triggering 0 polarity 1 [ 3.498953] xen: --> pirq=17 -> irq=17 (gsi=17) [ 3.502861] 0000:00:03.3: ttyS4 at I/O 0xf1c0 (irq = 17) is a 16550A [ 3.519362] Linux agpgart interface v0.103 [ 3.519443] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 3.519686] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 3.520859] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 3.520980] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 3.522240] brd: module loaded [ 3.522877] loop: module loaded [ 3.522999] ata_piix 0000:00:1f.2: version 2.13 [ 3.523015] xen: registering gsi 19 triggering 0 polarity 1 [ 3.523022] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 3.523024] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.523027] Already setup the GSI :19 [ 3.523035] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.523091] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.523422] scsi0 : ata_piix [ 3.523495] scsi1 : ata_piix [ 3.523538] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma 0xf170 irq 19 [ 3.523546] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma 0xf178 irq 19 [ 3.523570] xen: registering gsi 19 triggering 0 polarity 1 [ 3.523573] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 3.523575] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.523577] Already setup the GSI :19 [ 3.523584] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 3.523629] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 3.523824] scsi2 : ata_piix [ 3.523898] scsi3 : ata_piix [ 3.523939] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma 0xf110 irq 19 [ 3.523944] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma 0xf118 irq 19 [ 3.523994] xen: registering gsi 18 triggering 0 polarity 1 [ 3.523997] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 3.523999] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.524001] Already setup the GSI :18 [ 3.524028] pata_acpi 0000:00:03.2: setting latency timer to 64 [ 3.524090] xen: registering gsi 18 triggering 0 polarity 1 [ 3.524093] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 3.524095] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.524097] Already setup the GSI :18 [ 3.524118] ata_generic 0000:00:03.2: setting latency timer to 64 [ 3.524377] scsi4 : ata_generic [ 3.524456] scsi5 : ata_generic [ 3.524493] ata5: PATA max UDMA/100 cmd 0xf210 ctl 0xf200 bmdma 0xf1d0 irq 18 [ 3.524496] ata6: PATA max UDMA/100 cmd 0xf1f0 ctl 0xf1e0 bmdma 0xf1d8 irq 18 [ 3.524711] Fixed MDIO Bus: probed [ 3.524726] tun: Universal TUN/TAP device driver, 1.6 [ 3.524728] tun: (C) 1999-2004 Max Krasnyansky [ 3.524787] PPP generic driver version 2.4.2 [ 3.524883] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.524903] xen: registering gsi 18 triggering 0 polarity 1 [ 3.524907] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 3.524909] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.524911] Already setup the GSI :18 [ 3.524942] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.524947] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.524987] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.525037] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.528923] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 3.528930] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0626000 [ 3.540068] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.540217] hub 1-0:1.0: USB hub found [ 3.540222] hub 1-0:1.0: 6 ports detected [ 3.540295] xen: registering gsi 23 triggering 0 polarity 1 [ 3.540299] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 3.540301] xen: --> pirq=23 -> irq=23 (gsi=23) [ 3.540303] Already setup the GSI :23 [ 3.540320] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.540325] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.540361] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.540408] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.544304] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 3.544327] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0625000 [ 3.556066] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.556203] hub 2-0:1.0: USB hub found [ 3.556207] hub 2-0:1.0: 6 ports detected [ 3.556272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.556285] uhci_hcd: USB Universal Host Controller Interface driver [ 3.556304] xen: registering gsi 16 triggering 0 polarity 1 [ 3.556307] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 3.556309] xen: --> pirq=16 -> irq=16 (gsi=16) [ 3.556311] Already setup the GSI :16 [ 3.556322] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.556326] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.556363] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.556410] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 3.556534] hub 3-0:1.0: USB hub found [ 3.556539] hub 3-0:1.0: 2 ports detected [ 3.556604] xen: registering gsi 21 triggering 0 polarity 1 [ 3.556607] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 3.556609] xen: --> pirq=21 -> irq=21 (gsi=21) [ 3.556611] Already setup the GSI :21 [ 3.556621] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.556625] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.556669] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.556713] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0 [ 3.556836] hub 4-0:1.0: USB hub found [ 3.556840] hub 4-0:1.0: 2 ports detected [ 3.556903] xen: registering gsi 18 triggering 0 polarity 1 [ 3.556906] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 3.556908] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.556910] Already setup the GSI :18 [ 3.556920] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.556924] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.556961] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.556994] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080 [ 3.557114] hub 5-0:1.0: USB hub found [ 3.557118] hub 5-0:1.0: 2 ports detected [ 3.557183] xen: registering gsi 23 triggering 0 polarity 1 [ 3.557186] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 3.557188] xen: --> pirq=23 -> irq=23 (gsi=23) [ 3.557190] Already setup the GSI :23 [ 3.557200] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.557204] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.557237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.557269] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060 [ 3.557391] hub 6-0:1.0: USB hub found [ 3.557395] hub 6-0:1.0: 2 ports detected [ 3.557459] xen: registering gsi 19 triggering 0 polarity 1 [ 3.557462] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 3.557464] xen: --> pirq=19 -> irq=19 (gsi=19) [ 3.557466] Already setup the GSI :19 [ 3.557476] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.557480] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.557516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.557548] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040 [ 3.557670] hub 7-0:1.0: USB hub found [ 3.557674] hub 7-0:1.0: 2 ports detected [ 3.557737] xen: registering gsi 18 triggering 0 polarity 1 [ 3.557741] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 3.557743] xen: --> pirq=18 -> irq=18 (gsi=18) [ 3.557745] Already setup the GSI :18 [ 3.557754] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.557759] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.557795] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.557827] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020 [ 3.557958] hub 8-0:1.0: USB hub found [ 3.557962] hub 8-0:1.0: 2 ports detected [ 3.558053] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.562538] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.562545] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.562689] mousedev: PS/2 mouse device common for all mice [ 3.562882] rtc_cmos 00:05: RTC can wake from S4 [ 3.563019] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.563055] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 3.563130] device-mapper: uevent: version 1.0.3 [ 3.563203] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 3.563212] EFI Variables Facility v0.08 2004-May-17 [ 3.563429] TCP cubic registered [ 3.563526] NET: Registered protocol family 10 [ 3.563964] NET: Registered protocol family 17 [ 3.563979] Registering the dns_resolver key type [ 3.564135] PM: Hibernation image not present or could not be loaded. [ 3.564152] registered taskstats version 1 [ 3.574077] Magic number: 4:584:32 [ 3.574213] rtc_cmos 00:05: setting system clock to 2012-03-14 15:02:27 UTC (1331737347) [ 3.574439] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.574441] EDD information not available. [ 3.855437] ata4: SATA link down (SStatus 0 SControl 300) [ 3.855467] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 4.000130] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.024230] ata3.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133 [ 4.056228] ata3.00: configured for UDMA/133 [ 4.096067] usb 1-4: new high-speed USB device number 3 using ehci_hcd [ 4.228765] hub 1-4:1.0: USB hub found [ 4.228846] hub 1-4:1.0: 4 ports detected [ 4.316174] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.316201] ata1.01: SATA link down (SStatus 0 SControl 300) [ 4.316372] ata2.00: SATA link down (SStatus 0 SControl 300) [ 4.316391] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.328350] ata1.00: ATA-8: WDC WD5000AAKX-003CA0, 15.01H15, max UDMA/133 [ 4.328355] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.332225] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL00, max UDMA/100 [ 4.337342] ata1.00: configured for UDMA/133 [ 4.337450] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 4.337593] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.337658] sd 0:0:0:0: [sda] Write Protect is off [ 4.337661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.337688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.337744] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.348228] ata2.01: configured for UDMA/100 [ 4.353674] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL00 PQ: 0 ANSI: 5 [ 4.357953] sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.357958] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.358122] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 4.358247] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 4.372912] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5 [ 4.387797] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.387953] sr 2:0:0:0: Attached scsi CD-ROM sr1 [ 4.388088] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 4.395990] sda: sda1 sda2 < sda5 > [ 4.396367] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.555838] Freeing unused kernel memory: 896k freed [ 4.556081] Write protecting the kernel read-only data: 12288k [ 4.561574] Freeing unused kernel memory: 1856k freed [ 4.562685] Freeing unused kernel memory: 1336k freed [ 4.597165] udevd[96]: starting version 173 [ 4.608108] usb 6-2: new low-speed USB device number 2 using uhci_hcd [ 4.723152] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 4.723155] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 4.723200] xen: registering gsi 20 triggering 0 polarity 1 [ 4.723217] xen: --> pirq=20 -> irq=20 (gsi=20) [ 4.723238] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.768992] xen: registering gsi 22 triggering 0 polarity 1 [ 4.769007] xen: --> pirq=22 -> irq=22 (gsi=22) [ 4.819743] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input3 [ 4.819925] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 4.828483] firewire_ohci: Added fw-ohci device 0000:01:01.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 4.859404] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input4 [ 4.859602] generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-2/input1 [ 4.859622] usbcore: registered new interface driver usbhid [ 4.859624] usbhid: USB HID core driver [ 4.924539] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:e5:13:37 [ 4.924543] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.924676] e1000e 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 4.963006] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.024093] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 5.208200] input: USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5 [ 5.208326] generic-usb 0003:15D9:0A41.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.2-2/input0 [ 5.328213] firewire_core: created device fw0: GUID 00902700025084b9, S400 [ 15.296665] Adding 6181884k swap on /dev/sda5. Priority:-1 extents:1 across:6181884k [ 15.343597] udevd[344]: starting version 173 [ 15.666594] tpm_tis 00:0a: 1.2 TPM (device-id 0x1040, rev-id 4) [ 15.666598] tpm_tis 00:0a: Intel iTPM workaround enabled [ 15.756567] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 15.757854] xen: registering gsi 16 triggering 0 polarity 1 [ 15.757861] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 15.757864] xen: --> pirq=16 -> irq=16 (gsi=16) [ 15.757866] Already setup the GSI :16 [ 15.757874] mei 0000:00:03.0: setting latency timer to 64 [ 15.808203] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value [ 15.808250] tpm_tis 00:0a: TPM is disabled/deactivated (0x6) [ 15.837793] [drm] Initialized drm 1.1.0 20060810 [ 15.919032] lp: driver loaded but no devices found [ 16.194964] type=1400 audit(1331737360.117:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=628 comm="apparmor_parser" [ 16.195026] type=1400 audit(1331737360.117:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=628 comm="apparmor_parser" [ 16.195078] type=1400 audit(1331737360.117:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=628 comm="apparmor_parser" [ 16.286486] xen: registering gsi 16 triggering 0 polarity 1 [ 16.286492] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 16.286494] xen: --> pirq=16 -> irq=16 (gsi=16) [ 16.286496] Already setup the GSI :16 [ 16.286504] i915 0000:00:02.0: setting latency timer to 64 [ 16.451552] type=1400 audit(1331737360.373:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=732 comm="apparmor_parser" [ 16.494498] [drm] MTRR allocation failed. Graphics performance may suffer. [ 16.495791] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 16.495794] [drm] Driver supports precise vblank timestamp query. [ 16.495832] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 16.534470] type=1400 audit(1331737360.457:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=685 comm="apparmor_parser" [ 16.534537] type=1400 audit(1331737360.457:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=685 comm="apparmor_parser" [ 16.534591] type=1400 audit(1331737360.457:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=685 comm="apparmor_parser" [ 16.553489] Linux video capture interface: v2.00 [ 16.703559] fbcon: inteldrmfb (fb0) is primary device [ 16.704435] type=1400 audit(1331737360.629:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=794 comm="apparmor_parser" [ 16.765210] pvrusb2: Hardware description: WinTV PVR USB2 Model 24xxx [ 16.765910] usbcore: registered new interface driver pvrusb2 [ 16.765913] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 16.765915] pvrusb2: Debug mask is 31 (0x1f) [ 16.787611] pvrusb2: Binding ir_video to i2c address 0x18. [ 16.799171] Console: switching to colour frame buffer device 210x65 [ 16.853416] fb0: inteldrmfb frame buffer device [ 16.853419] drm: registered panic notifier [ 16.853524] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120111/video-1147) [ 16.853606] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 16.853665] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 16.853720] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 16.853776] xen: registering gsi 22 triggering 0 polarity 1 [ 16.853784] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 16.853786] xen: --> pirq=22 -> irq=22 (gsi=22) [ 16.853789] Already setup the GSI :22 [ 16.886981] cx25840 16-0044: cx25843-24 found @ 0x88 (pvrusb2_a) [ 16.894873] pvrusb2: Attached sub-driver cx25840 [ 16.923758] i2c-core: driver [tuner] using legacy suspend method [ 16.923762] i2c-core: driver [tuner] using legacy resume method [ 16.934409] tuner 16-0061: Tuner -1 found with type(s) Radio TV. [ 16.934415] pvrusb2: Attached sub-driver tuner [ 16.937399] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 16.944619] wm8775 16-001b: chip found @ 0x36 (pvrusb2_a) [ 16.948352] pvrusb2: Attached sub-driver wm8775 [ 17.021054] tda9887 16-0043: creating new instance [ 17.021058] tda9887 16-0043: tda988[5/6/7] found [ 17.021416] tuner 16-0043: Tuner 74 found with type(s) Radio TV. [ 17.021427] pvrusb2: Attached sub-driver tuner [ 17.591668] type=1400 audit(1331737361.513:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=917 comm="apparmor_parser" [ 17.622168] ppdev: user-space parallel port driver [ 17.652069] parport0: PC-style at 0x378 (0x778) [ 17.721060] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.770500] type=1400 audit(1331737361.693:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=918 comm="apparmor_parser" [ 17.780798] [PCSPP,TRISTATE,EPP] [ 17.780807] parport0: irq 5 detected [ 17.877198] lp0: using parport0 (polling). [ 17.927101] cx25840 16-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 17.977978] tveeprom 16-00a2: Hauppauge model 24019, rev E189, serial# 8663057 [ 17.977982] tveeprom 16-00a2: tuner model is TCL MFPE05 2 (idx 89, type 38) [ 17.977985] tveeprom 16-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 17.977988] tveeprom 16-00a2: audio processor is CX25843 (idx 37) [ 17.977990] tveeprom 16-00a2: decoder processor is CX25843 (idx 30) [ 17.977993] tveeprom 16-00a2: has radio, has IR receiver, has no IR transmitter [ 17.977999] pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K [ 17.978004] pvrusb2: Mapping standards mask=0xff00ff (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC) [ 17.978007] pvrusb2: Setting up 20 unique standard(s) [ 17.978010] pvrusb2: Set up standard idx=0 name=PAL-B/G [ 17.978013] pvrusb2: Set up standard idx=1 name=PAL-D/K [ 17.978015] pvrusb2: Set up standard idx=2 name=SECAM-B/G [ 17.978018] pvrusb2: Set up standard idx=3 name=SECAM-D/K [ 17.978020] pvrusb2: Set up standard idx=4 name=PAL-B [ 17.978022] pvrusb2: Set up standard idx=5 name=PAL-B1 [ 17.978025] pvrusb2: Set up standard idx=6 name=PAL-G [ 17.978027] pvrusb2: Set up standard idx=7 name=PAL-H [ 17.978029] pvrusb2: Set up standard idx=8 name=PAL-I [ 17.978031] pvrusb2: Set up standard idx=9 name=PAL-D [ 17.978033] pvrusb2: Set up standard idx=10 name=PAL-D1 [ 17.978036] pvrusb2: Set up standard idx=11 name=PAL-K [ 17.978038] pvrusb2: Set up standard idx=12 name=SECAM-B [ 17.978040] pvrusb2: Set up standard idx=13 name=SECAM-D [ 17.978043] pvrusb2: Set up standard idx=14 name=SECAM-G [ 17.978045] pvrusb2: Set up standard idx=15 name=SECAM-H [ 17.978047] pvrusb2: Set up standard idx=16 name=SECAM-K [ 17.978049] pvrusb2: Set up standard idx=17 name=SECAM-K1 [ 17.978051] pvrusb2: Set up standard idx=18 name=SECAM-L [ 17.978054] pvrusb2: Set up standard idx=19 name=SECAM-LC [ 17.978057] pvrusb2: Initial video standard auto-selected to PAL-B/G [ 17.978067] pvrusb2: Device initialization completed successfully. [ 17.978162] pvrusb2: registered device video0 [mpeg] [ 17.979984] pvrusb2: registered device radio0 [mpeg] [ 18.322587] tuner-simple 16-0061: creating new instance [ 18.322591] tuner-simple 16-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 19.276966] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 19.276972] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 19.277756] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.893674] audit_printk_skb: 33 callbacks suppressed [ 22.893677] type=1400 audit(1331737366.817:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=958 comm="apparmor_parser" [ 22.894605] type=1400 audit(1331737366.817:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=958 comm="apparmor_parser" [ 22.895197] type=1400 audit(1331737366.817:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=958 comm="apparmor_parser" [ 22.985106] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.294966] Netfilter messages via NETLINK v0.30. [ 23.315647] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.566461] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.567107] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 23.567110] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 23.623627] ctnetlink v0.93: registering with nfnetlink. [ 23.935050] ip_set: protocol 6 [ 23.955406] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 24.530858] xt_time: kernel timezone is +0800 [ 24.722795] Bridge firewalling registered [ 24.908074] u32 classifier [ 24.908077] Actions configured [ 25.145230] init: failsafe main process (881) killed by TERM signal [ 25.147907] init: apport pre-start process (1464) terminated with status 1 [ 25.161724] irqbalance[1501]: segfault at 4 ip 00007f82ac4c8056 sp 00007fffbbacaae0 error 6 in libc-2.13.so[7f82ac41d000+197000] [ 25.162823] init: irqbalance main process (1501) killed by SEGV signal [ 25.184320] init: apport post-stop process (1507) terminated with status 1 [ 25.359153] type=1400 audit(1331737369.281:26): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1499 comm="apparmor_parser" [ 29.520056] eth0: no IPv6 routers present [ 31.756069] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 31.756075] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 31.763086] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 2 at 0, next 3) [ 34.576107] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 35.609062] Bluetooth: Core ver 2.16 [ 35.609408] NET: Registered protocol family 31 [ 35.609411] Bluetooth: HCI device and connection manager initialized [ 35.609415] Bluetooth: HCI socket layer initialized [ 35.609418] Bluetooth: L2CAP socket layer initialized [ 35.609423] Bluetooth: SCO socket layer initialized [ 35.629420] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 35.629423] Bluetooth: BNEP filters: protocol multicast [ 35.636449] Bluetooth: RFCOMM TTY layer initialized [ 35.636455] Bluetooth: RFCOMM socket layer initialized [ 35.636457] Bluetooth: RFCOMM ver 1.11 [ 35.879575] init: plymouth-stop pre-start process (2483) terminated with status 1 [ 48.408132] UDF-fs: Partition marked readonly; forcing readonly mount [ 48.456409] UDF-fs: INFO Mounting volume 'Toh Yan Ling', timestamp 2010/12/11 17:39 (11e0)