[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-45) (dannf@xxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 08:57:29 UTC 2012 [ 0.000000] Command line: placeholder root=UUID=9ae68388-d77c-4f93-97cd-661e3c787190 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000060000000 (usable) [ 0.000000] Xen: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] Xen: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] Xen: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] Xen: 00000000bf7ec000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec8a000 - 00000000fec8b000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x60000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000060000000 [ 0.000000] 0000000000 - 0060000000 page 4k [ 0.000000] kernel direct mapping tables up to 60000000 @ 100000-403000 [ 0.000000] RAMDISK: 01708000 - 0332a000 [ 0.000000] ACPI: RSDP 00000000000fac10 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 0005C (v01 SMCI 20100528 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 052810 FACP1443 20100528 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7906a0 0650A (v01 10006 10006000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 052810 APIC1443 20100528 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 052810 OEMMCFG 20100528 MSFT 00000097) [ 0.000000] ACPI: SLIT 00000000bf7904f0 00030 (v01 052810 OEMSLIT 20100528 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 0007D (v01 052810 OEMB1443 20100528 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf79a6a0 00038 (v01 052810 OEMHPET 20100528 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79ee90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000060000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000060000000 [ 0.000000] NODE_DATA [0000000000010040 - 000000000001803f] [ 0.000000] bootmap [0000000000019000 - 0000000000024fff] pages c [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0060000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000362b000 - 000364a000] XEN PAGETABLES ==> [000362b000 - 000364a000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00016e7b44] TEXT DATA BSS ==> [0001000000 - 00016e7b44] [ 0.000000] #4 [0001708000 - 000332a000] RAMDISK ==> [0001708000 - 000332a000] [ 0.000000] #5 [000332a000 - 000362b000] XEN START INFO ==> [000332a000 - 000362b000] [ 0.000000] #6 [00016e8000 - 00016e821d] BRK ==> [00016e8000 - 00016e821d] [ 0.000000] #7 [0000100000 - 00003e1000] PGTABLE ==> [0000100000 - 00003e1000] [ 0.000000] #8 [0000010000 - 0000010030] ACPI SLIT ==> [0000010000 - 0000010030] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00060000 [ 0.000000] On node 0 totalpages: 393101 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 740 pages reserved [ 0.000000] DMA zone: 3185 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 5320 pages used for memmap [ 0.000000] DMA32 zone: 383800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec8a000, GSI 24-24 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 280 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:5f790000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003680000 s90328 r8192 d24360 u122880 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 1.145664] trying to map vcpu_info 0 at ffff88000368b020, mfn 13b68b, offset 32 [ 1.145668] cpu 0 using vcpu_info at ffff88000368b020 [ 1.145671] trying to map vcpu_info 1 at ffff8800036a9020, mfn 13b6a9, offset 32 [ 1.145674] cpu 1 using vcpu_info at ffff8800036a9020 [ 1.145676] trying to map vcpu_info 2 at ffff8800036c7020, mfn 13b6c7, offset 32 [ 1.145679] cpu 2 using vcpu_info at ffff8800036c7020 [ 1.145681] trying to map vcpu_info 3 at ffff8800036e5020, mfn 13b6e5, offset 32 [ 1.145684] cpu 3 using vcpu_info at ffff8800036e5020 [ 1.145685] Xen: using vcpu_info placement [ 1.145691] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386985 [ 1.145693] Policy zone: DMA32 [ 1.145696] Kernel command line: placeholder root=UUID=9ae68388-d77c-4f93-97cd-661e3c787190 ro quiet [ 1.145726] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 1.146059] Initializing CPU#0 [ 1.154734] DMA: Placing 64MB software IO TLB between ffff880004f58000 - ffff880008f58000 [ 1.154738] DMA: software IO TLB at phys 0x4f58000 - 0x8f58000 [ 1.154741] xen_swiotlb_fixup: buf=ffff880004f58000 size=67108864 [ 1.175539] xen_swiotlb_fixup: buf=ffff880008fb8000 size=32768 [ 1.183119] Memory: 1442072k/1572864k available (3152k kernel code, 460k absent, 130332k reserved, 2064k data, 604k init) [ 1.183159] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.183183] Hierarchical RCU implementation. [ 1.183190] NR_IRQS:4352 nr_irqs:1280 [ 1.183271] xen: --> irq=0 [ 1.183278] xen: --> irq=1 [ 1.183282] xen: --> irq=2 [ 1.183287] xen: --> irq=3 [ 1.183291] xen: --> irq=4 [ 1.183295] xen: --> irq=5 [ 1.183300] xen: --> irq=6 [ 1.183304] xen: --> irq=7 [ 1.183308] xen: --> irq=8 [ 1.183312] xen: --> irq=9 [ 1.183317] xen: --> irq=10 [ 1.183328] xen: --> irq=11 [ 1.183333] xen: --> irq=12 [ 1.183337] xen: --> irq=13 [ 1.183342] xen: --> irq=14 [ 1.183346] xen: --> irq=15 [ 1.183362] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.183366] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.183368] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 1.183371] xen: registering gsi 9 triggering 0 polarity 0 [ 1.183373] xen_allocate_pirq: returning irq 9 for gsi 9 [ 1.183375] xen: --> irq=9 [ 1.183382] xen: acpi sci 9 [ 1.189510] Console: colour VGA+ 80x25 [ 1.189622] console [tty0] enabled [ 1.189650] Xen: using vcpuop timer interface [ 1.189654] installing Xen timer for CPU 0 [ 1.189661] alloc irq_desc for 1279 on node -1 [ 1.189664] alloc kstat_irqs on node -1 [ 1.189683] Detected 2133.454 MHz processor. [ 1.189690] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.90 BogoMIPS (lpj=8533816) [ 1.189707] Security Framework initialized [ 1.189713] SELinux: Disabled at boot. [ 1.190094] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.190727] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.190972] Mount-cache hash table entries: 256 [ 1.191101] Initializing cgroup subsys ns [ 1.191105] Initializing cgroup subsys cpuacct [ 1.191110] Initializing cgroup subsys devices [ 1.191113] Initializing cgroup subsys freezer [ 1.191115] Initializing cgroup subsys net_cls [ 1.191152] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.191155] CPU: L2 cache: 256K [ 1.191157] CPU: L3 cache: 4096K [ 1.191162] CPU 0/0x0 -> Node 0 [ 1.191164] CPU: Unsupported number of siblings 16 [ 1.191169] mce: CPU supports 9 MCE banks [ 1.191195] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 1.191210] SMP alternatives: switching to UP code [ 1.218048] ACPI: Core revision 20090903 [ 1.248472] alloc irq_desc for 1278 on node -1 [ 1.248474] alloc kstat_irqs on node -1 [ 1.248484] alloc irq_desc for 1277 on node -1 [ 1.248486] alloc kstat_irqs on node -1 [ 1.248490] alloc irq_desc for 1276 on node -1 [ 1.248493] alloc kstat_irqs on node -1 [ 1.248497] alloc irq_desc for 1275 on node -1 [ 1.248499] alloc kstat_irqs on node -1 [ 1.248666] installing Xen timer for CPU 1 [ 1.248669] alloc irq_desc for 1274 on node -1 [ 1.248671] alloc kstat_irqs on node -1 [ 1.248700] SMP alternatives: switching to SMP code [ 1.274563] alloc irq_desc for 1273 on node -1 [ 1.274566] alloc kstat_irqs on node -1 [ 1.274578] alloc irq_desc for 1272 on node -1 [ 1.274581] alloc kstat_irqs on node -1 [ 1.274585] alloc irq_desc for 1271 on node -1 [ 1.274588] alloc kstat_irqs on node -1 [ 1.274592] alloc irq_desc for 1270 on node -1 [ 1.274595] alloc kstat_irqs on node -1 [ 1.274608] Initializing CPU#1 [ 1.274648] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.274651] CPU: L2 cache: 256K [ 1.274652] CPU: L3 cache: 4096K [ 1.274656] CPU 1/0x0 -> Node 0 [ 1.274658] CPU: Unsupported number of siblings 16 [ 1.274760] installing Xen timer for CPU 2 [ 1.274764] alloc irq_desc for 1269 on node -1 [ 1.274767] alloc kstat_irqs on node -1 [ 1.274792] alloc irq_desc for 1268 on node -1 [ 1.274794] alloc kstat_irqs on node -1 [ 1.274800] alloc irq_desc for 1267 on node -1 [ 1.274802] alloc kstat_irqs on node -1 [ 1.274807] alloc irq_desc for 1266 on node -1 [ 1.274809] alloc kstat_irqs on node -1 [ 1.274816] alloc irq_desc for 1265 on node -1 [ 1.274818] alloc kstat_irqs on node -1 [ 1.274829] Initializing CPU#2 [ 1.274867] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.274870] CPU: L2 cache: 256K [ 1.274871] CPU: L3 cache: 4096K [ 1.274875] CPU 2/0x0 -> Node 0 [ 1.274877] CPU: Unsupported number of siblings 16 [ 1.274973] installing Xen timer for CPU 3 [ 1.274977] alloc irq_desc for 1264 on node -1 [ 1.274980] alloc kstat_irqs on node -1 [ 1.275001] alloc irq_desc for 1263 on node -1 [ 1.275003] alloc kstat_irqs on node -1 [ 1.275008] alloc irq_desc for 1262 on node -1 [ 1.275011] alloc kstat_irqs on node -1 [ 1.275015] alloc irq_desc for 1261 on node -1 [ 1.275017] alloc kstat_irqs on node -1 [ 1.275022] alloc irq_desc for 1260 on node -1 [ 1.275024] alloc kstat_irqs on node -1 [ 1.275035] Initializing CPU#3 [ 1.275073] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.275075] CPU: L2 cache: 256K [ 1.275077] CPU: L3 cache: 4096K [ 1.275081] CPU 3/0x0 -> Node 0 [ 1.275083] CPU: Unsupported number of siblings 16 [ 1.275120] Brought up 4 CPUs [ 1.275146] CPU0 attaching sched-domain: [ 1.275149] domain 0: span 0-3 level CPU [ 1.275152] groups: group ffff88000368fd00 cpus 0 group ffff8800036add00 cpus 1 group ffff8800036cbd00 cpus 2 group ffff8800036e9d00 cpus 3 [ 1.275164] CPU1 attaching sched-domain: [ 1.275166] domain 0: span 0-3 level CPU [ 1.275169] groups: group ffff8800036add00 cpus 1 group ffff8800036cbd00 cpus 2 group ffff8800036e9d00 cpus 3 group ffff88000368fd00 cpus 0 [ 1.275179] CPU2 attaching sched-domain: [ 1.275181] domain 0: span 0-3 level CPU [ 1.275183] groups: group ffff8800036cbd00 cpus 2 group ffff8800036e9d00 cpus 3 group ffff88000368fd00 cpus 0 group ffff8800036add00 cpus 1 [ 1.275193] CPU3 attaching sched-domain: [ 1.275195] domain 0: span 0-3 level CPU [ 1.275198] groups: group ffff8800036e9d00 cpus 3 group ffff88000368fd00 cpus 0 group ffff8800036add00 cpus 1 group ffff8800036cbd00 cpus 2 [ 1.275466] devtmpfs: initialized [ 1.278443] Grant table initialized [ 1.278446] regulator: core version 0.5 [ 1.278499] NET: Registered protocol family 16 [ 1.278551] alloc irq_desc for 1259 on node -1 [ 1.278553] alloc kstat_irqs on node -1 [ 1.278687] ACPI: bus type pci registered [ 1.278703] sync cpu 0 get result 1 max_id 3 [ 1.278715] sync cpu 1 get result 1 max_id 3 [ 1.278724] sync cpu 2 get result 1 max_id 3 [ 1.278732] sync cpu 3 get result 1 max_id 3 [ 1.278737] alloc irq_desc for 1258 on node -1 [ 1.278739] alloc kstat_irqs on node -1 [ 1.278826] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.278829] PCI: MCFG area at e0000000 reserved in E820 [ 1.325249] PCI: Using MMCONFIG at e0000000 - efffffff [ 1.325251] PCI: Using configuration type 1 for base access [ 1.325856] bio: create slab at 0 [ 1.327251] ERROR: Unable to locate IOAPIC for GSI 9 [ 1.327321] ACPI: EC: Look up EC in DSDT [ 1.330013] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 1.330023] \_SB_:_OSC evaluation returned wrong type [ 1.330025] _OSC request data:1 7 [ 1.331152] ACPI: Executed 1 blocks of module-level executable AML code [ 1.342955] ACPI: Interpreter enabled [ 1.342958] ACPI: (supports S0 S1 S4 S5) [ 1.342989] ACPI: Using IOAPIC for interrupt routing [ 1.356571] ACPI Warning: Incorrect checksum in table [OEMB] - 64, should be 61 (20090903/tbutils-314) [ 1.356768] ACPI: No dock devices found. [ 1.357003] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.357183] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.357190] pci 0000:00:00.0: PME# disabled [ 1.357374] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.357381] pci 0000:00:01.0: PME# disabled [ 1.357565] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.357571] pci 0000:00:03.0: PME# disabled [ 1.357759] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.357765] pci 0000:00:07.0: PME# disabled [ 1.357950] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.357956] pci 0000:00:09.0: PME# disabled [ 1.358034] pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff] [ 1.358122] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 1.358128] pci 0000:00:13.0: PME# disabled [ 1.358662] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbef8000-0xfbefbfff] [ 1.358832] pci 0000:00:16.1: reg 10 64bit mmio: [0xfbef4000-0xfbef7fff] [ 1.359002] pci 0000:00:16.2: reg 10 64bit mmio: [0xfbef0000-0xfbef3fff] [ 1.359172] pci 0000:00:16.3: reg 10 64bit mmio: [0xfbeec000-0xfbeeffff] [ 1.359341] pci 0000:00:16.4: reg 10 64bit mmio: [0xfbee8000-0xfbeebfff] [ 1.359511] pci 0000:00:16.5: reg 10 64bit mmio: [0xfbee4000-0xfbee7fff] [ 1.359682] pci 0000:00:16.6: reg 10 64bit mmio: [0xfbee0000-0xfbee3fff] [ 1.359853] pci 0000:00:16.7: reg 10 64bit mmio: [0xfbedc000-0xfbedffff] [ 1.360062] pci 0000:00:1a.0: reg 20 io port: [0xcc00-0xcc1f] [ 1.360215] pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f] [ 1.360368] pci 0000:00:1a.2: reg 20 io port: [0xc800-0xc81f] [ 1.360522] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfbeda000-0xfbeda3ff] [ 1.360655] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.360661] pci 0000:00:1a.7: PME# disabled [ 1.360738] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbed4000-0xfbed7fff] [ 1.360849] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.360855] pci 0000:00:1b.0: PME# disabled [ 1.361009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.361015] pci 0000:00:1c.0: PME# disabled [ 1.361192] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.361199] pci 0000:00:1c.4: PME# disabled [ 1.361367] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.361373] pci 0000:00:1c.5: PME# disabled [ 1.361481] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f] [ 1.361634] pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f] [ 1.361788] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f] [ 1.361946] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbed8000-0xfbed83ff] [ 1.362084] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.362091] pci 0000:00:1d.7: PME# disabled [ 1.362350] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 1.362355] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff) [ 1.362478] pci 0000:00:1f.2: reg 10 io port: [0xc000-0xc007] [ 1.362489] pci 0000:00:1f.2: reg 14 io port: [0xbc00-0xbc03] [ 1.362499] pci 0000:00:1f.2: reg 18 io port: [0xb880-0xb887] [ 1.362509] pci 0000:00:1f.2: reg 1c io port: [0xb800-0xb803] [ 1.362519] pci 0000:00:1f.2: reg 20 io port: [0xb480-0xb48f] [ 1.362530] pci 0000:00:1f.2: reg 24 io port: [0xb400-0xb40f] [ 1.362651] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbed2000-0xfbed20ff] [ 1.362677] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 1.362770] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] [ 1.362781] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] [ 1.362791] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] [ 1.362801] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] [ 1.362811] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] [ 1.362822] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] [ 1.363388] pci 0000:06:00.0: reg 10 32bit mmio: [0xfbce0000-0xfbcfffff] [ 1.363417] pci 0000:06:00.0: reg 18 io port: [0xdc00-0xdc1f] [ 1.363433] pci 0000:06:00.0: reg 1c 32bit mmio: [0xfbcdc000-0xfbcdffff] [ 1.363612] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.363621] pci 0000:06:00.0: PME# disabled [ 1.369340] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 1.369346] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 1.369451] pci 0000:07:00.0: reg 10 32bit mmio: [0xfbde0000-0xfbdfffff] [ 1.369480] pci 0000:07:00.0: reg 18 io port: [0xec00-0xec1f] [ 1.369496] pci 0000:07:00.0: reg 1c 32bit mmio: [0xfbddc000-0xfbddffff] [ 1.369674] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 1.369683] pci 0000:07:00.0: PME# disabled [ 1.377351] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff] [ 1.377358] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 1.377430] pci 0000:08:01.0: reg 10 32bit mmio pref: [0xf9000000-0xf9ffffff] [ 1.377441] pci 0000:08:01.0: reg 14 32bit mmio: [0xfaffc000-0xfaffffff] [ 1.377453] pci 0000:08:01.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff] [ 1.377625] pci 0000:00:1e.0: transparent bridge [ 1.377636] pci 0000:00:1e.0: bridge 32bit mmio: [0xfaf00000-0xfb7fffff] [ 1.377646] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf9000000-0xf9ffffff] [ 1.377717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.378281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 1.378371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 1.378471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 1.378559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 1.378647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.378837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 1.378935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 1.379017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.432947] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.433098] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.433246] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.433395] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.433543] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 1.433696] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 1.433845] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15) [ 1.434005] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.434101] xen_balloon: Initialising balloon driver with page order 0. [ 1.434177] vgaarb: device added: PCI:0000:08:01.0,decodes=io+mem,owns=io+mem,locks=none [ 1.434180] vgaarb: loaded [ 1.434267] PCI: Using ACPI for IRQ routing [ 1.434588] Switching to clocksource xen [ 1.436132] pnp: PnP ACPI init [ 1.436148] ACPI: bus type pnp registered [ 1.436785] xen: registering gsi 8 triggering 1 polarity 0 [ 1.436788] xen_allocate_pirq: returning irq 8 for gsi 8 [ 1.436790] xen: --> irq=8 [ 1.437025] xen: registering gsi 13 triggering 1 polarity 0 [ 1.437028] xen_allocate_pirq: returning irq 13 for gsi 13 [ 1.437030] xen: --> irq=13 [ 1.437819] xen: registering gsi 4 triggering 1 polarity 0 [ 1.437822] xen_allocate_pirq: returning irq 4 for gsi 4 [ 1.437824] xen: --> irq=4 [ 1.438459] xen: registering gsi 3 triggering 1 polarity 0 [ 1.438461] xen_allocate_pirq: returning irq 3 for gsi 3 [ 1.438463] xen: --> irq=3 [ 1.440449] pnp: PnP ACPI: found 14 devices [ 1.440451] ACPI: ACPI bus type pnp unregistered [ 1.440463] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.440471] system 00:06: ioport range 0xa10-0xa1f has been reserved [ 1.440478] system 00:09: ioport range 0xca2-0xca3 has been reserved [ 1.440481] system 00:09: ioport range 0xcf8-0xcff could not be reserved [ 1.440484] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 1.440488] system 00:09: ioport range 0x800-0x87f has been reserved [ 1.440491] system 00:09: ioport range 0x500-0x57f has been reserved [ 1.440494] system 00:09: iomem range 0x400-0x4ff could not be reserved [ 1.440498] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.440501] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.440505] system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved [ 1.440511] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.440515] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.440521] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 1.440527] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 1.440530] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 1.440534] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved [ 1.445620] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 1.445759] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.445762] pci 0000:00:01.0: IO window: disabled [ 1.445770] pci 0000:00:01.0: MEM window: disabled [ 1.445775] pci 0000:00:01.0: PREFETCH window: disabled [ 1.445785] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 1.445787] pci 0000:00:03.0: IO window: disabled [ 1.445795] pci 0000:00:03.0: MEM window: disabled [ 1.445801] pci 0000:00:03.0: PREFETCH window: disabled [ 1.445810] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 1.445812] pci 0000:00:07.0: IO window: disabled [ 1.445820] pci 0000:00:07.0: MEM window: disabled [ 1.445825] pci 0000:00:07.0: PREFETCH window: disabled [ 1.445835] pci 0000:00:09.0: PCI bridge, secondary bus 0000:04 [ 1.445837] pci 0000:00:09.0: IO window: disabled [ 1.445845] pci 0000:00:09.0: MEM window: disabled [ 1.445851] pci 0000:00:09.0: PREFETCH window: disabled [ 1.445860] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 1.445865] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.445873] pci 0000:00:1c.0: MEM window: 0x60000000-0x601fffff [ 1.445880] pci 0000:00:1c.0: PREFETCH window: 0x00000060200000-0x000000603fffff [ 1.445890] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 1.445895] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 1.445903] pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff [ 1.445909] pci 0000:00:1c.4: PREFETCH window: 0x00000060400000-0x000000605fffff [ 1.445920] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07 [ 1.445924] pci 0000:00:1c.5: IO window: 0xe000-0xefff [ 1.445932] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff [ 1.445939] pci 0000:00:1c.5: PREFETCH window: 0x00000060600000-0x000000607fffff [ 1.445949] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 1.445952] pci 0000:00:1e.0: IO window: disabled [ 1.445960] pci 0000:00:1e.0: MEM window: 0xfaf00000-0xfb7fffff [ 1.445966] pci 0000:00:1e.0: PREFETCH window: 0x000000f9000000-0x000000f9ffffff [ 1.445991] pci 0000:00:01.0: setting latency timer to 64 [ 1.446008] pci 0000:00:03.0: setting latency timer to 64 [ 1.446024] pci 0000:00:07.0: setting latency timer to 64 [ 1.446040] pci 0000:00:09.0: setting latency timer to 64 [ 1.446053] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 1.446059] xen: registering gsi 17 triggering 0 polarity 1 [ 1.446067] alloc irq_desc for 17 on node -1 [ 1.446069] alloc kstat_irqs on node -1 [ 1.446074] xen: --> irq=17 [ 1.446080] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.446086] pci 0000:00:1c.0: setting latency timer to 64 [ 1.446100] xen: registering gsi 17 triggering 0 polarity 1 [ 1.446103] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.446104] xen: --> irq=17 [ 1.446107] Already setup the GSI :17 [ 1.446109] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.446116] pci 0000:00:1c.4: setting latency timer to 64 [ 1.446129] xen: registering gsi 16 triggering 0 polarity 1 [ 1.446134] alloc irq_desc for 16 on node -1 [ 1.446136] alloc kstat_irqs on node -1 [ 1.446139] xen: --> irq=16 [ 1.446143] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.446149] pci 0000:00:1c.5: setting latency timer to 64 [ 1.446161] pci 0000:00:1e.0: setting latency timer to 64 [ 1.446166] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.446169] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.446172] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff] [ 1.446175] pci_bus 0000:05: resource 1 mem: [0x60000000-0x601fffff] [ 1.446177] pci_bus 0000:05: resource 2 pref mem [0x60200000-0x603fffff] [ 1.446180] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff] [ 1.446183] pci_bus 0000:06: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 1.446185] pci_bus 0000:06: resource 2 pref mem [0x60400000-0x605fffff] [ 1.446188] pci_bus 0000:07: resource 0 io: [0xe000-0xefff] [ 1.446191] pci_bus 0000:07: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 1.446193] pci_bus 0000:07: resource 2 pref mem [0x60600000-0x607fffff] [ 1.446196] pci_bus 0000:08: resource 1 mem: [0xfaf00000-0xfb7fffff] [ 1.446199] pci_bus 0000:08: resource 2 pref mem [0xf9000000-0xf9ffffff] [ 1.446202] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 1.446204] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.446230] NET: Registered protocol family 2 [ 1.446411] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.447389] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.448480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.448709] TCP: Hash tables configured (established 262144 bind 65536) [ 1.448712] TCP reno registered [ 1.448811] NET: Registered protocol family 1 [ 1.448863] xen: registering gsi 16 triggering 0 polarity 1 [ 1.448867] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.448869] xen: --> irq=16 [ 1.448873] Already setup the GSI :16 [ 1.448876] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.448903] pci 0000:00:1a.0: PCI INT A disabled [ 1.448910] xen: registering gsi 21 triggering 0 polarity 1 [ 1.448919] alloc irq_desc for 21 on node -1 [ 1.448922] alloc kstat_irqs on node -1 [ 1.448927] xen: --> irq=21 [ 1.448933] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.448957] pci 0000:00:1a.1: PCI INT B disabled [ 1.448965] xen: registering gsi 19 triggering 0 polarity 1 [ 1.448969] alloc irq_desc for 19 on node -1 [ 1.448971] alloc kstat_irqs on node -1 [ 1.448974] xen: --> irq=19 [ 1.448978] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.449003] pci 0000:00:1a.2: PCI INT D disabled [ 1.449018] xen: registering gsi 18 triggering 0 polarity 1 [ 1.449022] alloc irq_desc for 18 on node -1 [ 1.449024] alloc kstat_irqs on node -1 [ 1.449027] xen: --> irq=18 [ 1.449031] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.449075] pci 0000:00:1a.7: PCI INT C disabled [ 1.449088] xen: registering gsi 23 triggering 0 polarity 1 [ 1.449092] alloc irq_desc for 23 on node -1 [ 1.449095] alloc kstat_irqs on node -1 [ 1.449098] xen: --> irq=23 [ 1.449102] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.449127] pci 0000:00:1d.0: PCI INT A disabled [ 1.449134] xen: registering gsi 19 triggering 0 polarity 1 [ 1.449136] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.449138] xen: --> irq=19 [ 1.449140] Already setup the GSI :19 [ 1.449143] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.449167] pci 0000:00:1d.1: PCI INT B disabled [ 1.449174] xen: registering gsi 18 triggering 0 polarity 1 [ 1.449177] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.449179] xen: --> irq=18 [ 1.449181] Already setup the GSI :18 [ 1.449183] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.449208] pci 0000:00:1d.2: PCI INT C disabled [ 1.449222] xen: registering gsi 23 triggering 0 polarity 1 [ 1.449224] xen_allocate_pirq: returning irq 23 for gsi 23 [ 1.449226] xen: --> irq=23 [ 1.449228] Already setup the GSI :23 [ 1.449231] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.449255] pci 0000:00:1d.7: PCI INT A disabled [ 1.449273] pci 0000:08:01.0: Boot video device [ 1.449323] Unpacking initramfs... [ 1.473770] Freeing initrd memory: 28808k freed [ 1.479791] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.479797] DMA: Placing 64MB software IO TLB between ffff880004f58000 - ffff880008f58000 [ 1.479800] DMA: software IO TLB at phys 0x4f58000 - 0x8f58000 [ 1.480367] audit: initializing netlink socket (disabled) [ 1.480380] type=2000 audit(1346634674.413:1): initialized [ 1.483775] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.485416] VFS: Disk quotas dquot_6.5.2 [ 1.485466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.485549] msgmni has been set to 2872 [ 1.485859] alg: No test for stdrng (krng) [ 1.485915] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.485919] io scheduler noop registered [ 1.485921] io scheduler anticipatory registered [ 1.485923] io scheduler deadline registered [ 1.485979] io scheduler cfq registered (default) [ 1.486213] alloc irq_desc for 1257 on node -1 [ 1.486215] alloc kstat_irqs on node -1 [ 1.486257] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.486473] alloc irq_desc for 1256 on node -1 [ 1.486476] alloc kstat_irqs on node -1 [ 1.486505] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.486729] alloc irq_desc for 1255 on node -1 [ 1.486732] alloc kstat_irqs on node -1 [ 1.486761] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.486973] alloc irq_desc for 1254 on node -1 [ 1.486976] alloc kstat_irqs on node -1 [ 1.487005] pcieport 0000:00:09.0: setting latency timer to 64 [ 1.487198] alloc irq_desc for 1253 on node -1 [ 1.487200] alloc kstat_irqs on node -1 [ 1.487233] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.487430] alloc irq_desc for 1252 on node -1 [ 1.487433] alloc kstat_irqs on node -1 [ 1.487463] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.487658] alloc irq_desc for 1251 on node -1 [ 1.487660] alloc kstat_irqs on node -1 [ 1.487690] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.487817] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.487827] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.487833] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.487840] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support [ 1.491913] registering netback [ 1.492020] alloc irq_desc for 1250 on node -1 [ 1.492023] alloc kstat_irqs on node -1 [ 1.493450] alloc irq_desc for 1249 on node -1 [ 1.493453] alloc kstat_irqs on node -1 [ 1.493826] hpet_acpi_add: no address or irqs in _CRS [ 1.493842] Linux agpgart interface v0.103 [ 1.493893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.494024] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.494155] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.494446] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.494605] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.494772] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.494831] PNP: No PS/2 controller found. Probing ports directly. [ 1.497494] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.497502] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.497587] mice: PS/2 mouse device common for all mice [ 1.497630] rtc_cmos 00:03: RTC can wake from S4 [ 1.497670] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.497703] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.497718] cpuidle: using governor ladder [ 1.497721] cpuidle: using governor menu [ 1.497726] No iBFT detected. [ 1.498004] TCP cubic registered [ 1.498117] NET: Registered protocol family 10 [ 1.498806] Mobile IPv6 [ 1.498809] NET: Registered protocol family 17 [ 1.498889] PM: Resume from disk failed. [ 1.498900] registered taskstats version 1 [ 1.500106] rtc_cmos 00:03: setting system clock to 2012-09-03 01:11:14 UTC (1346634674) [ 1.500157] Initalizing network drop monitor service [ 1.500238] Freeing unused kernel memory: 604k freed [ 1.500361] Write protecting the kernel read-only data: 4336k [ 1.531801] udev[83]: starting version 164 [ 1.615512] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 1.615516] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.615572] xen: registering gsi 16 triggering 0 polarity 1 [ 1.615576] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.615578] xen: --> irq=16 [ 1.615583] Already setup the GSI :16 [ 1.615586] e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.615637] e1000e 0000:06:00.0: setting latency timer to 64 [ 1.615997] alloc irq_desc for 1248 on node -1 [ 1.615999] alloc kstat_irqs on node -1 [ 1.616123] alloc irq_desc for 1247 on node -1 [ 1.616125] alloc kstat_irqs on node -1 [ 1.616245] alloc irq_desc for 1246 on node -1 [ 1.616248] alloc kstat_irqs on node -1 [ 1.616513] e1000e 0000:06:00.0: Disabling ASPM L0s [ 1.648958] usbcore: registered new interface driver usbfs [ 1.648986] usbcore: registered new interface driver hub [ 1.649046] usbcore: registered new device driver usb [ 1.650510] SCSI subsystem initialized [ 1.650847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.650880] xen: registering gsi 18 triggering 0 polarity 1 [ 1.650884] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.650886] xen: --> irq=18 [ 1.650891] Already setup the GSI :18 [ 1.650894] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.650921] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.650926] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.650954] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.651019] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.654896] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.654923] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbeda000 [ 1.664014] libata version 3.00 loaded. [ 1.670835] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.670862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.670865] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.670868] usb usb1: Product: EHCI Host Controller [ 1.670870] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 1.670873] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.670950] usb usb1: configuration #1 chosen from 1 choice [ 1.670984] hub 1-0:1.0: USB hub found [ 1.671004] hub 1-0:1.0: 6 ports detected [ 1.671071] ata_piix 0000:00:1f.2: version 2.13 [ 1.671091] xen: registering gsi 19 triggering 0 polarity 1 [ 1.671094] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.671096] xen: --> irq=19 [ 1.671100] Already setup the GSI :19 [ 1.671103] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.671110] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.671163] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.671256] scsi0 : ata_piix [ 1.671441] scsi1 : ata_piix [ 1.674044] ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19 [ 1.674053] ata2: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19 [ 1.674087] xen: registering gsi 23 triggering 0 polarity 1 [ 1.674090] xen_allocate_pirq: returning irq 23 for gsi 23 [ 1.674092] xen: --> irq=23 [ 1.674095] Already setup the GSI :23 [ 1.674098] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.674123] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.674128] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.674137] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.674192] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.678087] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.678107] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbed8000 [ 1.694740] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.694780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.694784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.694787] usb usb2: Product: EHCI Host Controller [ 1.694790] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd [ 1.694793] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.694862] usb usb2: configuration #1 chosen from 1 choice [ 1.694897] hub 2-0:1.0: USB hub found [ 1.694913] hub 2-0:1.0: 6 ports detected [ 1.695056] xen: registering gsi 19 triggering 0 polarity 1 [ 1.695059] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.695061] xen: --> irq=19 [ 1.695064] Already setup the GSI :19 [ 1.695067] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.695075] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.695122] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.695198] scsi2 : ata_piix [ 1.695268] scsi3 : ata_piix [ 1.697425] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 1.697431] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 1.734264] e1000e 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:25:90:08:f8:f4 [ 1.734267] e1000e 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.734354] e1000e 0000:06:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 1.734391] xen: registering gsi 17 triggering 0 polarity 1 [ 1.734394] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.734396] xen: --> irq=17 [ 1.734398] Already setup the GSI :17 [ 1.734401] e1000e 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.734446] e1000e 0000:07:00.0: setting latency timer to 64 [ 1.734753] alloc irq_desc for 1245 on node -1 [ 1.734756] alloc kstat_irqs on node -1 [ 1.734873] alloc irq_desc for 1244 on node -1 [ 1.734875] alloc kstat_irqs on node -1 [ 1.734985] alloc irq_desc for 1243 on node -1 [ 1.734988] alloc kstat_irqs on node -1 [ 1.735554] e1000e 0000:07:00.0: Disabling ASPM L0s [ 1.752363] uhci_hcd: USB Universal Host Controller Interface driver [ 1.752393] xen: registering gsi 16 triggering 0 polarity 1 [ 1.752396] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.752398] xen: --> irq=16 [ 1.752401] Already setup the GSI :16 [ 1.752404] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.752416] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.752421] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.752431] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.752478] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000cc00 [ 1.752537] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.752540] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.752543] usb usb3: Product: UHCI Host Controller [ 1.752545] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.752547] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.752608] usb usb3: configuration #1 chosen from 1 choice [ 1.752636] hub 3-0:1.0: USB hub found [ 1.752648] hub 3-0:1.0: 2 ports detected [ 1.752702] xen: registering gsi 21 triggering 0 polarity 1 [ 1.752705] xen_allocate_pirq: returning irq 21 for gsi 21 [ 1.752707] xen: --> irq=21 [ 1.752710] Already setup the GSI :21 [ 1.752712] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.752724] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.752729] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.752736] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.752780] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880 [ 1.752831] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.752834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.752837] usb usb4: Product: UHCI Host Controller [ 1.752839] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.752841] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.752902] usb usb4: configuration #1 chosen from 1 choice [ 1.752929] hub 4-0:1.0: USB hub found [ 1.752941] hub 4-0:1.0: 2 ports detected [ 1.752997] xen: registering gsi 19 triggering 0 polarity 1 [ 1.752999] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.753001] xen: --> irq=19 [ 1.753004] Already setup the GSI :19 [ 1.753007] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.753019] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.753023] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.753031] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.753064] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c800 [ 1.753114] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.753117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.753119] usb usb5: Product: UHCI Host Controller [ 1.753122] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.753124] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.753179] usb usb5: configuration #1 chosen from 1 choice [ 1.753205] hub 5-0:1.0: USB hub found [ 1.753216] hub 5-0:1.0: 2 ports detected [ 1.753271] xen: registering gsi 23 triggering 0 polarity 1 [ 1.753274] xen_allocate_pirq: returning irq 23 for gsi 23 [ 1.753276] xen: --> irq=23 [ 1.753279] Already setup the GSI :23 [ 1.753282] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.753293] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.753298] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.753307] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.753340] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480 [ 1.753389] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.753392] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.753395] usb usb6: Product: UHCI Host Controller [ 1.753397] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.753399] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.753452] usb usb6: configuration #1 chosen from 1 choice [ 1.753480] hub 6-0:1.0: USB hub found [ 1.753492] hub 6-0:1.0: 2 ports detected [ 1.753547] xen: registering gsi 19 triggering 0 polarity 1 [ 1.753550] xen_allocate_pirq: returning irq 19 for gsi 19 [ 1.753552] xen: --> irq=19 [ 1.753554] Already setup the GSI :19 [ 1.753557] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.753568] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.753573] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.753580] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.753613] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400 [ 1.753665] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.753668] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.753671] usb usb7: Product: UHCI Host Controller [ 1.753673] usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.753675] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.753730] usb usb7: configuration #1 chosen from 1 choice [ 1.753756] hub 7-0:1.0: USB hub found [ 1.753768] hub 7-0:1.0: 2 ports detected [ 1.753823] xen: registering gsi 18 triggering 0 polarity 1 [ 1.753825] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.753827] xen: --> irq=18 [ 1.753830] Already setup the GSI :18 [ 1.753833] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.753844] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.753849] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.753856] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.753889] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 [ 1.753938] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.753941] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.753944] usb usb8: Product: UHCI Host Controller [ 1.753946] usb usb8: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd [ 1.753948] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.754003] usb usb8: configuration #1 chosen from 1 choice [ 1.754030] hub 8-0:1.0: USB hub found [ 1.754041] hub 8-0:1.0: 2 ports detected [ 1.856060] e1000e 0000:07:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:25:90:08:f8:f5 [ 1.856063] e1000e 0000:07:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.856149] e1000e 0000:07:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.026118] ata3: SATA link down (SStatus 0 SControl 300) [ 2.037464] ata4: SATA link down (SStatus 0 SControl 300) [ 2.194749] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.322246] ata2.00: SATA link down (SStatus 0 SControl 300) [ 2.322278] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.383407] usb 6-2: New USB device found, idVendor=0624, idProduct=0294 [ 2.383411] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.383414] usb 6-2: Product: Dell 03R874 [ 2.383417] usb 6-2: Manufacturer: Avocent [ 2.383502] usb 6-2: configuration #1 chosen from 1 choice [ 2.466851] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.466872] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.475316] ata1.00: ATA-8: ST31000524NS, SN11, max UDMA/133 [ 2.475320] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.491336] ata1.00: configured for UDMA/133 [ 2.491456] scsi 0:0:0:0: Direct-Access ATA ST31000524NS SN11 PQ: 0 ANSI: 5 [ 2.494928] usbcore: registered new interface driver hiddev [ 2.498808] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.498883] sd 0:0:0:0: [sda] Write Protect is off [ 2.498886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.498917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.499181] sda: [ 2.508634] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1 [ 2.508681] generic-usb 0003:0624:0294.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.0-2/input0 [ 2.516368] sda1 sda2 < sda5 [ 2.531678] input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input2 [ 2.531739] generic-usb 0003:0624:0294.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.0-2/input1 [ 2.531759] usbcore: registered new interface driver usbhid [ 2.531762] usbhid: v2.6:USB HID core driver [ 2.534295] sda6 sda7 sda8 > [ 2.555825] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.899763] device-mapper: uevent: version 1.0.3 [ 2.899895] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.909503] PM: Starting manual resume from disk [ 2.909506] PM: Resume from partition 8:5 [ 2.909508] PM: Checking hibernation image. [ 2.909833] PM: Error -22 checking image file [ 2.909836] PM: Resume from disk failed. [ 2.924059] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.924062] EXT3-fs: write access will be enabled during recovery. [ 2.946363] kjournald starting. Commit interval 5 seconds [ 2.946373] EXT3-fs: recovery complete. [ 2.946668] EXT3-fs: mounted filesystem with ordered data mode. [ 3.754433] udev[499]: starting version 164 [ 3.945625] dca service started, version 1.12.1 [ 4.001259] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 4.001323] xen: registering gsi 43 triggering 0 polarity 1 [ 4.001332] alloc irq_desc for 43 on node -1 [ 4.001334] alloc kstat_irqs on node -1 [ 4.001340] xen: --> irq=43 [ 4.001349] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 4.001381] ioatdma 0000:00:16.0: setting latency timer to 64 [ 4.001471] alloc irq_desc for 1242 on node -1 [ 4.001473] alloc kstat_irqs on node -1 [ 4.001854] xen: registering gsi 44 triggering 0 polarity 1 [ 4.001860] alloc irq_desc for 44 on node -1 [ 4.001862] alloc kstat_irqs on node -1 [ 4.001866] xen: --> irq=44 [ 4.001873] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 4.001895] ioatdma 0000:00:16.1: setting latency timer to 64 [ 4.001973] alloc irq_desc for 1241 on node -1 [ 4.001975] alloc kstat_irqs on node -1 [ 4.002654] xen: registering gsi 45 triggering 0 polarity 1 [ 4.002660] alloc irq_desc for 45 on node -1 [ 4.002663] alloc kstat_irqs on node -1 [ 4.002666] xen: --> irq=45 [ 4.002673] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 4.002697] ioatdma 0000:00:16.2: setting latency timer to 64 [ 4.002780] alloc irq_desc for 1240 on node -1 [ 4.002783] alloc kstat_irqs on node -1 [ 4.003358] xen: registering gsi 46 triggering 0 polarity 1 [ 4.003366] alloc irq_desc for 46 on node -1 [ 4.003369] alloc kstat_irqs on node -1 [ 4.003374] xen: --> irq=46 [ 4.003382] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 4.003411] ioatdma 0000:00:16.3: setting latency timer to 64 [ 4.003503] alloc irq_desc for 1239 on node -1 [ 4.003505] alloc kstat_irqs on node -1 [ 4.007654] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 4.007660] ACPI: Power Button [PWRB] [ 4.007712] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 4.007716] ACPI: Power Button [PWRF] [ 4.008167] xen: registering gsi 43 triggering 0 polarity 1 [ 4.008170] xen_allocate_pirq: returning irq 43 for gsi 43 [ 4.008173] xen: --> irq=43 [ 4.008177] Already setup the GSI :43 [ 4.008180] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 4.008213] ioatdma 0000:00:16.4: setting latency timer to 64 [ 4.008304] alloc irq_desc for 1238 on node -1 [ 4.008306] alloc kstat_irqs on node -1 [ 4.008678] xen: registering gsi 44 triggering 0 polarity 1 [ 4.008682] xen_allocate_pirq: returning irq 44 for gsi 44 [ 4.008684] xen: --> irq=44 [ 4.008687] Already setup the GSI :44 [ 4.008690] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 4.008717] ioatdma 0000:00:16.5: setting latency timer to 64 [ 4.008797] alloc irq_desc for 1237 on node -1 [ 4.008800] alloc kstat_irqs on node -1 [ 4.009157] xen: registering gsi 45 triggering 0 polarity 1 [ 4.009162] xen_allocate_pirq: returning irq 45 for gsi 45 [ 4.009164] xen: --> irq=45 [ 4.009167] Already setup the GSI :45 [ 4.009170] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 4.009198] ioatdma 0000:00:16.6: setting latency timer to 64 [ 4.009289] alloc irq_desc for 1236 on node -1 [ 4.009293] alloc kstat_irqs on node -1 [ 4.009669] xen: registering gsi 46 triggering 0 polarity 1 [ 4.009672] xen_allocate_pirq: returning irq 46 for gsi 46 [ 4.009674] xen: --> irq=46 [ 4.009677] Already setup the GSI :46 [ 4.009680] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 4.009706] ioatdma 0000:00:16.7: setting latency timer to 64 [ 4.009789] alloc irq_desc for 1235 on node -1 [ 4.009791] alloc kstat_irqs on node -1 [ 4.122331] ACPI: SSDT 00000000bf79e0c0 008F0 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 4.123073] ACPI: SSDT 00000000bf79e9b0 004D5 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 4.126163] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) [ 4.127906] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) [ 4.128785] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) [ 4.130779] ACPI: CPU-1 (power states: C1[C1] C2[C3] C3[C3]) [ 4.137541] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 7.296701] xen: registering gsi 18 triggering 0 polarity 1 [ 7.296706] xen_allocate_pirq: returning irq 18 for gsi 18 [ 7.296709] xen: --> irq=18 [ 7.296714] Already setup the GSI :18 [ 7.296718] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 31.570836] Error: Driver 'pcspkr' is already registered, aborting... [ 31.635627] xen: registering gsi 22 triggering 0 polarity 1 [ 31.635637] alloc irq_desc for 22 on node -1 [ 31.635641] alloc kstat_irqs on node -1 [ 31.635647] xen: --> irq=22 [ 31.635657] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 31.635725] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 31.926667] hda-intel: no codecs found! [ 31.926920] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 186.671977] Adding 7811064k swap on /dev/sda5. Priority:-1 extents:1 across:7811064k [ 187.701870] EXT3 FS on sda7, internal journal [ 190.439342] loop: module loaded [ 202.731165] kjournald starting. Commit interval 5 seconds [ 202.731449] EXT3 FS on sda1, internal journal [ 202.731457] EXT3-fs: mounted filesystem with ordered data mode. [ 202.739591] kjournald starting. Commit interval 5 seconds [ 202.739903] EXT3 FS on sda6, internal journal [ 202.739910] EXT3-fs: mounted filesystem with ordered data mode. [ 285.391611] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 285.395769] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 285.396222] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 296.174595] Event-channel device installed. [ 297.320190] alloc irq_desc for 1234 on node -1 [ 297.320194] alloc kstat_irqs on node -1 [ 297.320355] alloc irq_desc for 1233 on node -1 [ 297.320358] alloc kstat_irqs on node -1 [ 297.322088] XENBUS: Unable to read cpu state [ 297.322298] XENBUS: Unable to read cpu state [ 297.322490] XENBUS: Unable to read cpu state [ 297.323213] XENBUS: Unable to read cpu state [ 300.308073] Bridge firewalling registered [ 301.180816] eth0: no IPv6 routers present [ 442.059305] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 445.180920] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 445.181356] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 445.185609] device peth0 entered promiscuous mode [ 445.200468] eth0: port 1(peth0) entering forwarding state [ 451.395728] ip_tables: (C) 2000-2006 Netfilter Core Team [ 458.353997] peth0: no IPv6 routers present [ 458.354001] eth0: no IPv6 routers present